Monitoring and fast detection of mycotoxin-producing fungi based on headspace solid-phase microextraction and headspace sorptive extraction of the volatile metabolites

Solid phase microextraction in combination with capillary GC-MS was used as monitoring technique for the collection and detection of the fungal volatile metabolite (+)-aristolochene by sporulated surface cultures of Penicillium roqueforti. A comparison was made between different toxigenic and nontoxigenic strains of P. roqueforti. Different growth conditions and media, such as malt extract agar, potato dextrose agar and sabouraud dextrose agar were compared. Whereas toxigenic strains produced large amounts of (+)-aristolochene, beta-elemene, valencene and germacrene A, nontoxigenic P. roqueforti strains showed a remarkably different headspace profile, in which ethyl-2-hexenoate, E-beta-caryophyllene, aromadendrene and beta-patchoulene were the predominant volatiles, apart from other sesquiterpene hydrocarbons present at lower concentrations. Stir bar sorptive extraction, was also applied in the headspace sampling mode, i.e. headspace sorptive extraction (HSSE) for the enrichment of fungal volatiles from sporulated surface cultures to differentiate between toxigenic and nontoxigenic fungi. Hence, it can be concluded that headspace analysis of volatile fungal metabolites by SPME and HSSE in combination with capillary GC-MS is a suitable monitoring technique for the fast detection of mycotoxin producing fungi.     

Cover Picture

The cover picture shows the metalloporphyrin heterodimer [(tpp)Mo$\rm{\mathop{-}^{4}}$Re(oep)](+) with the novel [Mo$\rm{\mathop{-}^{4}}$Re](5+) core. The core represents the first example of a quadruple bond between elements of different triads, thus proving that heterometallic quadruple bonds are not limited to the Group 6 metals. From the space-filling model it is clear that there is no interaction between the stabilizing porphyrin ligands. The ORTEP plot in a projection along the Re-Mo axis emphasizes the perfectly eclipsed geometry of the porphyrins, which is unambiguous proof of the existence of the quadruple bond in the solid state. The diamagnetism and large magnetic anisotropy of the cation, as determined by (1)H NMR spectroscopy, indicate that the quadruple bond is retained in solution. A logical and well-defined synthetic route was used to synthesize the dimer, and can be extended to other metalloporphyrins to generate further novel quadruple bonds (the picture was generated by Marina Boulan, St. Petersburg, Russia), full details are reported by J. P. Collman et al. on p. 1271 ff.     

Maximal monotonicity, conjugation and the duality product

Recently, the authors studied the connection between each maximal monotone operator and a family of convex functions. Each member of this family characterizes the operator and satisfies two particular inequalities.

The aim of this paper is to establish the converse of the latter fact. Namely, that every convex function satisfying those two particular inequalities is associated to a unique maximal monotone operator.

     

Nonlinear Liouville theorems for Grushin and Tricomi operators

The aim of this paper is to study necessary conditions for existence of weak solutions of the inequality

     

Time-domain calculations of sound interactions with outdoor ground surfaces

A time-domain formulation for sound propagation in rigid-frame porous media, including waveform attenuation and dispersion, is developed. The new formulation is based on inversion of the relaxation functions from a previous model [Wilson DK, Ostashev VE, Collier SL. J Acoust Soc Am 2004;116:1889-92], thereby casting the convolution integrals in a form amenable to numerical implementation. Numerical techniques are developed that accurately implement the relaxational equations and transparently reduce to previous results in low- and high-frequency limits. The techniques are demonstrated on calculations of outdoor sound propagation involving hills, barriers, and ground surfaces with various material properties. We also compare the relaxation formulation to a widely applied phenomenological model developed by Zwikker and Kosten. The two models can be made equivalent if the resistance constant, structure constant, and compression modulus in the ZK model are allowed to be weakly frequency dependent. But if the ZK parameters are taken to be constant, as is typically the case, the relaxation model provides more accurate calculations of attenuation by acoustically soft porous materials such as snow, gravel, and forest litter.     

Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Mechanical properties of natural rubber nanocomposites reinforced with cellulosic nanoparticles obtained from combined mechanical shearing,and enzymatic and acid hydrolysis of sisal fibers

In a previous work (Siqueira et al. 2010b) the preparation of cellulosic nanoparticles from sisal fibers using different processing routes, viz. a combination of mechanical shearing, acid and enzymatic hydrolysis was reported. It was shown that the pre-enzymatic hydrolysis treatment of bleached sisal pulp helps the preparation of well individualized rod-like nanocrystals. An amorphous polymer (natural rubber—NR) was chosen as model matrix to investigate the effect of these nanoparticles on the thermo-mechanical properties of nanocomposites. Both tensile tests and dynamic mechanical analyses showed improved stiffness for all nanocomposites. The enzymatic treatment allowed production of a huge range of cellulosic nanoparticles which provided completely different mechanical properties to NR matrix.     

Intensity‐Carrying Modes in Raman and Raman Optical Activity Spectroscopy

We describe a quantum‐chemical approach for the determination of modes with maximum Raman and Raman optical activity (ROA) intensity by maximizing the intensities with respect to the Raman and Raman optical activity intensity, respectively, which is shown to lead to eigenvalue equations. The intensity‐carrying modes are in general hypothetical modes and do not directly correspond to a certain normal mode in the spectrum. However, they provide information about those molecular distortions leading to intense bands in the spectrum. Modes with maximum Raman intensity are presented for propane‐1,3‐dione, propane‐1,3‐dionate, and Λ‐tris(propane‐1,3‐dionato)cobalt(III). Moreover, the mode with highest ROA intensity is examined for this chiral cobalt complex and also for the (chiral) amino acid L ‐tryptophan. The Raman and ROA high‐intensity modes are an optimal starting guess for intensity‐tracking calculations, in which selectively normal modes with high Raman or ROA intensity are converged. We present the first Raman and ROA intensity‐tracking calculations. These reveal a high potential for large molecules, for which the selective calculation of normal modes with high intensity is desirable in view of the large computational effort required for the calculation of Raman and ROA polarizability property tensors.