7-Benz[c] acridinemethanols as tetracyclic analogs of the 2-phenyl-4-quinolinemethanol antimalarials

A series of new 7-benz[c]acridinemethanols and 5,6-dihydro-7-benz[c]acridinemethanols was prepared as rigid, tetracyclic analogs of the antimalarial 2-phenyl-4-quinolinemethanols. Condensation of 5,7-dichloroisatin with 6-chloro-, 7-chloro-, and 6,7-dichloro-1-tetralone furnished halogenated 5,6-dihydro-7-benz[c]acridinecarboxylic acids, which were transformed into the corresponding acid chlorides, acyl malonates, α-bromomethyl ketones, and epoxides. Fully aromatic members of the series obtained via dehydrogenation of the 5,6-dihydro acids were likewise converted into epoxides via the acylmalonate route. Although all the epoxides studied proved to be exceptionally resistant to ring-opening by di-n-butylamine, probably on account of steric effects, they could be cleaved readily with piperidine or morpholine. Nmr spectra of the resulting amino alcohols suggest that these compounds exist in a single preferred conformation stabilized by internal O-H····N hydrogen bonding, and that free rotation about the side chain C-C bond does not occur at room temperature.     

Comparing a selenium accumulator plant (Brassica juncea) to a nonaccumulator plant (Helianthus annuus) to investigate selenium-containing proteins

Selenoproteins have been identified in a diverse range of organisms, including bacteria and animals. Their occurrence and role in the plant kingdom are, however, less well-understood. This work investigated the water-soluble selenium-containing proteins extracted from a selenium-accumulating plant species (Brassica juncea) and a nonaccumulator species (Helianthus annuus) exposed to varying forms and concentrations of selenium. Firstly, protein extracts were analyzed by size exclusion chromatography coupled to inductively coupled plasma mass spectrometry; specific detection was achieved by monitoring characteristic isotopes. Then, proteolytic digests of the plant extracts were analyzed by reversed phase chromatography coupled to ICP–MS in order to investigate selenoamino acid and selenopeptide content. Selenomethionine was observed to be the primary constituent of the proteins of the nonaccumulator plant, while selenocystine and selenomethionine were found in the same proportion in the accumulator extract. One main selenium-containing species was present at higher levels in the root digests than in the leaf digests; levels were greater in the nonaccumulator than in the accumulator plant.     

Structure and properties of licochalcone A-human serum albumin complexes in solution: a spectroscopic, photophysical and computational approach to understand drug-protein interaction

In the present contribution we address the study of the interaction of a flavonoid-derivative licochalcone A (LA) with human serum albumin (HSA). The application of circular dichroism, UV-Vis absorption, fluorescence and laser flash photolysis combined with molecular mechanics, molecular dynamics and quantum mechanical calculations of rotational strength afforded a clear picture of the modes of association of the LA neutral molecule to HSA, evidencing specific interactions with protein amino acids and their photophysical consequences. The drug is primarily associated in subdomain IIA where a strong interaction with Trp214 is established. At least two different positions of LA with respect to tryptophan are possible, one with the phenolic ring of the drug facing the aromatic ring of Trp214 and the other with the methoxyphenolic ring of LA in proximity to Trp214. In both cases LA is at ca. 4 angstroms from Trp214. This vicinity does not affect much the S1 singlet state deactivation of the bound drug, which exhibits a slightly higher fluorescence quantum yield and fluorescence lifetime on the order of that of the free molecule. The LA triplet lifetime appears to be somewhat shortened in this site. The secondary binding site is in subdomain IIIA. Here, the carbonyl group of LA experiences a strong H-bond with the OH-phenolic substituent of Tyr411. This interaction reduces substantially the LA molecular degrees of freedom, thereby determining a decrease of both radiative and nonradiative rate constants for decay of the singlet. The overall rigidity of the structure causes a lengthening of the triplet lifetime.     

Creating a fatty acid methyl ester database for lipid profiling in a single drop of human blood using high resolution capillary gas chromatography and mass spectrometry

Capillary gas chromatography (CGC) in combination with mass spectrometry (MS) was optimized for the separation and detection of the fatty acids occurring in the lipid fraction of blood. A fingertip blood sample (ca. 50 microL) was transesterified into the methyl esters and analyzed on a 100 m x 0.25 mm ID column coated with a biscyanopropyl polysiloxane (HP-88) stationary phase. The method was retention time locked. Programmed temperature vaporization injection (PTV) in the solvent venting mode was applied to minimize the sample size, while maintaining high sensitivity. The total analysis time was ca. 60 min. Retention times and both electron impact (EI) and positive chemical ionization (PCI) mass spectrometry were combined to elucidate the fatty acids according to alkyl chain, degree of unsaturation and position of the double bonds. Using extracted ion chromatograms about 100 fatty acids and related compounds were detected in blood samples and most of them were identified. This work resulted in a very large fatty acid methyl esters database, containing retention time and mass spectral information that will be applied to metabolomic studies.     

Effect of analyte properties on the kinetic performance of liquid chromatographic separations

Advances in modern high-performance liquid chromatography (HPLC) have led to increased interest in the comparison of the ultimate performance limits of methodologies aimed at increasing the resolving power per unit time. Kinetic plot-based methods have proven invaluable in facilitating such evaluations. However, in bridging the gap between fundamental comparisons and the eventual practical applicability of kinetic performance data, the effect of analyte properties have thus far largely been neglected. Using pharmaceutical compounds as representative real-life analytes, it is demonstrated that noteworthy differences in the optimal kinetic performance of a chromatographic system are observed compared to data for common test compounds. For a given stationary phase particle size, higher optimal- and maximum plate numbers, corresponding to increased analysis times, are measured for pharmaceutical compounds. Moreover, it is found that the optimal particle size/maximum pressure combination depends on the analyte under investigation, with the beneficial range of efficiencies for small particles shifted towards higher plate numbers for drug molecules. It is further demonstrated that the pH of the mobile phase plays a crucial role in determining the kinetic performance of pharmaceutical compounds. These data clearly indicate that data for test compounds do not reflect the performance attainable for pharmaceutical compounds and highlights the importance of using real-life samples to perform kinetic evaluations.     

The effect of terminal chain modifications on the mesomorphic properties of 4,4′-disubstituted diphenyldiacetylenes

The typical sidewalls produced in the fabrication of protrusion electrodes are proposed to create a low voltage (4.5 V_rms) and high transmittance (93%) blue-phase liquid crystal display (BP-LCD). The tilted electrodes produce a strong horizontal electrical field that reduces the operating voltage considerably. The common problem of the ‘dead zones’ is solved by reflecting the light onto the electrodes. In order to estimate the phase retardation of the reflected light, a ray tracing simulation program for anisotropic mediums has been developed. The proposed device is more competitive than vertical field switching based BP-LCD and also, has the advantages of protruded in-plane-switching structures. These facts make this technology a potential candidate for the next generation of BP-LCDs.     

Mass spectrometric profiling of Bacillus cereus strains and quantitation of the emetic toxin cereulide by means of stable isotope dilution analysis and HEp-2 bioassay

A fast and robust high-throughput ultra-performance liquid chromatography/time-of-flight mass spectrometry (UPLC–TOF MS) profiling method was developed and successfully applied to discriminate a total of 78 Bacillus cereus strains into no/low, medium and high producers of the emetic toxin cereulide. The data obtained by UPLC–TOF MS profiling were confirmed by absolute quantitation of cereulide in selected samples by means of high-performance liquid chromatography with tandem mass spectrometry (HPLC–MS/MS) and stable isotope dilution assay (SIDA). Interestingly, the B. cereus strains isolated from four vomit samples and five faeces samples from patients showing symptoms of intoxication were among the group of medium or high producers. Comparison of HEp-2 bioassay data with those determined by means of mass spectrometry showed differences, most likely because the HEp-2 bioassay is based on the toxic action of cereulide towards mitochondria of eukaryotic cells rather than on a direct measurement of the toxin. In conclusion, the UPLC–electrospray ionization (ESI)–TOF MS and the HPLC–ESI–MS/MS–SIDA analyses seem to be promising tools for the robust high-throughput analysis of cereulide in B. cereus cultures, foods and other biological samples.

Analysis of Polyphenols in Honey: Extraction,Separation and Quantification Procedures

Polyphenols are secondary plant metabolites playing a major role as potentially functional components. They can also be used for honey authentication. This review gathers the recent literature references about honey extraction procedures, as well as instrumental analysis of phenolic compounds found in honey. Liquid-Liquid extraction is widely used for both extraction and purification purposes, with adequate recovery percentages. However, the use of high solvent volumes is a major disadvantage. More environmentally friendly methods include accelerated solvent extraction, and dispersive and inverse dispersive liquid-liquid microextraction. Solid phase extraction is the most common method for honey polyphenols’ isolation. Polyphenol isolation by a combination of liquid-liquid and solid phase extraction allows good recoveries for a variety of different compounds. High-performance liquid chromatography with ultraviolet or mass spectrometry detectors is by far, the most commonly employed instrumental procedure to separate and quantify polyphenols in honey although capillary electrophoresis has been also successfully used for these purposes. The use of new sorbents, the optimization of current procedures and the development of other simple and rapid analytical techniques are challenges for future analysis of polyphenols found in honey.     

Quantitative analysis of complex amino acids and RGD peptides by X‐ray photoelectron spectroscopy (XPS)

The C 1 s, N 1 s, and O 1 s core level binding energies (BEs) of the functional groups in amino acids (glycine, aspartic acid, glutamic acid, arginine, and histidine) with varied side‐chains and cell‐binding RGD‐based peptides have been determined and characterized by X‐ray photoelectron spectroscopy with a monochromatic Al K_α source. The zwitterionic nature of the amino acids in the solid state is unequivocally evident from the N 1 s signals of the protonated amine groups and the C 1 s signature of carboxylate groups. Significant adventitious carbon contamination is evident for all samples but can be quantitatively accounted for. No intrinsic differences in the XP spectra are evident between two polymorphs (α and γ) of glycine, indicating that the crystallographic differences have a minor influence on the core level BEs for this system. The two nitrogen centers in the imidazole group of histidine exhibit an N 1 s BE shift that is in line with previously reported data for theophylline and aqueous imidazole solutions, while the nitrogen and carbon chemical shifts reflect the unusual guanidinium chemical environment in arginine. It is shown that the complex envelopes of C 1 s and O 1 s photoemission spectra for short‐chain peptides can be analyzed quantitatively by reference to the less complex XP spectra of the constituent amino acids, provided the peptides are of high enough purity. The distinctive N 1 s photoemission from the amide linkages provides an indicator of peptide formation even in the presence of common impurities, and variations in the relative intensities of N 1 s were found to be diagnostic for each of the three peptides investigated (RGD, RGDS, and RGDSC). Copyright © 2013 John Wiley & Sons, Ltd.