High-pressure phase equilibrium data for systems with carbon dioxide, α-humulene and trans-caryophyllene

The aim of this work is to report phase equilibrium data for the binary systems (CO₂ + α-humulene) and (CO₂ + trans-caryophyllene), and for the ternary system (CO₂ + α-humulene + trans-caryophyllene). Results from literature show that α-humulene and trans-caryophyllene are the main compounds responsible for the anti-inflammatory and anti-allergic characteristics attributed to the medicinal plant Cordia verbenacea D.C., hence giving importance to the phase behaviour investigation performed in this work. Phase equilibrium experiments were performed in a high-pressure, variable-volume view cell over the temperature range of T = (303 to 343) K and pressures up to 20 MPa. (Liquid + liquid) and (vapour + liquid + liquid) equilibrium were observed at T = 303 K, while (vapour + liquid) phase transitions were verified to occur from T = (313 to 343) K, for all systems studied. Thermodynamic modelling was performed using the Peng–Robinson equation of state and the classical quadratic mixing rules, with a satisfactory agreement between experimental and calculated values.     

Determination of alkenes in cracking products by normal-phase high-performance liquid chromatography–diode array detection

Alkene content determinations in fluid catalytic cracking (FCC) liquid products were performed by means of normal-phase high-performance liquid chromatography (NP-HPLC) with diode array detection (UV/DAD). Separation of alkenes from aromatic hydrocarbons was performed on amino-modified silica gel column with n-heptane as mobile phase. The column has a little affinity to alkenes and saturated hydrocarbons and a pronounced affinity to aromatic compounds. The problem of alkenes and saturates co-elution on this column type was overcome with the detection system, UV/DAD, sensitive and selective to alkenes, while saturates are inactive in UV field. Total alkene content was determined as a sum of mono- and dialkene groups quantified by external standard method. Validation and verification of the developed method proved their applicability. The following criteria were used to validate the HPLC–DAD method: selectivity, linearity, precision, limits of detection and quantification. Alkene contents were quantified with the external standard method of wide calibration range, so both low and high alkene contents can be determined by the single calibration. Correlation coefficients were higher than 0.99. Precision was evaluated as repeatability and intermediary precision with relative standard deviations less than 5%. Some structural investigation of alkene groups was performed to confirm the assumption. Proposed method was compared with certified NMR method. Six commercial motor gasoline samples were analyzed by these two methods. Obtained results indicate good agreement between alkene content determined by both methods. The developed method was applied to the determination of alkene content in liquid FCC products in the boiling range from 70 °C to 190 °C.     

Deposition of Polyacrylic Acid Films by Means of an Atmospheric Pressure Dielectric Barrier Discharge

The present work describes the plasma polymerisation of acrylic acid at atmospheric pressure. The influence of two operating parameters (monomer concentration and discharge power) on the properties of the deposited films is investigated. Results show that at a monomer concentration of 2.5 ppm and a discharge power of 9.5 W, the monomer is only slightly fragmented leading to a high amount of carboxylic acid groups on the deposited films. In contrast, when monomer concentration is decreased or discharge power increased, the incidence of monomer fragmentation processes is higher, leading to a lower amount of carboxylic acid groups on the films. This behaviour can be explained by a higher energy amount available per monomer molecule at low monomer concentrations and high discharge powers and a higher flux of positive ions attacking the surface at high discharge powers. Taking into account these results, it can be concluded that the deposition parameters should be carefully selected in order to preserve the stability of the monomer and thus obtain coatings with high carboxylic acid densities.     

Synthetic studies toward 1,2-dioxanes as precursors of potential endoperoxide-containing antimalarials

Introduction in therapy of the naturally occurring trioxane artemisinin opened a new era in malaria treatment and prompted the development of semisynthetic and synthetic derivatives characterized by the presence of the key peroxide bridge. The 1,2-dioxane ring is present in some natural endoperoxides such as plakortin and dihydroplakortin, which are endowed with interesting antimalarial properties. Here we describe the development of a versatile stereocontrolled synthetic strategy to 1,2-dioxanes functionalized at the critical C3, C4, and C6 positions, potentially useful for the development of innovative antimalarials.     

Resonators for In Vivo Imaging: Practical Experience

Resonators for preclinical electron paramagnetic resonance imaging have been designed primarily for rodents and rabbits and have internal diameters between 16 and 51 mm. Lumped-circuit resonators include loop-gap, Alderman–Grant, and saddle coil topologies and surface coils. Bimodal resonators are useful for isolating the detected signal from incident power and reducing dead time in pulse experiments. Resonators for continuous wave, rapid scan, and pulse experiments are described. Experience at the University of Chicago and University of Denver in design of resonators for in vivo imaging is summarized.     

Novel Antiretroviral Therapeutic Strategies for HIV

When the first cases of HIV infection appeared in the 1980s, AIDS was a deadly disease without any therapeutic alternatives. Currently, there is still no cure for most cases mainly due to the multiple tissues that act as a reservoir for this virus besides the high viral mutagenesis that leads to an antiretroviral drug resistance. Throughout the years, multiple drugs with specific mechanisms of action on distinct targets have been approved. In this review, the most recent phase III clinical studies and other research therapies as advanced antiretroviral nanodelivery systems will be here discussed. Although the combined antiretroviral therapy is effective in reducing viral loading to undetectable levels, it also presents some disadvantages, such as usual side effects, high frequency of administration, and the possibility of drug resistance. Therefore, several new drugs, delivery systems, and vaccines have been tested in pre-clinical and clinical trials. Regarding drug delivery, an attempt to change the route of administration of some conventional antiretrovirals has proven to be successful and surpassed some issues related to patient compliance. Nanotechnology has brought a new approach to overcoming certain obstacles of formulation design including drug solubility and biodistribution. Overall, the encapsulation of antiretroviral drugs into nanosystems has shown improved drug release and pharmacokinetic profile.     

Enhancing the coherence of a spin qubit by operating it as a feedback loop that controls its nuclear spin bath

In many realizations of electron spin qubits the dominant source of decoherence is the fluctuating nuclear spin bath of the host material. The slowness of this bath lends itself to a promising mitigation strategy where the nuclear spin bath is prepared in a narrowed state with suppressed fluctuations. Here, this approach is realized for a two-electron spin qubit in a GaAs double quantum dot and a nearly tenfold increase in the inhomogeneous dephasing time T?* is demonstrated. Between subsequent measurements, the bath is prepared by using the qubit as a feedback loop that first measures its nuclear environment by coherent precession, and then polarizes it depending on the final state. This procedure results in a stable fixed point at a nonzero polarization gradient between the two dots, which enables fast universal qubit control.     

Electron spin relaxation of copper(II) complexes in glassy solution between 10 and 120 K

The temperature dependence, between 10 and 120 K, of electron spin-lattice relaxation at X-band was analyzed for a series of eight pyrrolate-imine complexes and for ten other copper(II) complexes with varying ligands and geometry including copper-containing prion octarepeat domain and S100 type proteins. The geometry of the CuN4 coordination sphere for pyrrolate-imine complexes with R=H, methyl, n-butyl, diphenylmethyl, benzyl, 2-adamantyl, 1-adamantyl, and tert-butyl has been shown to range from planar to pseudo-tetrahedral. The fit to the recovery curves was better for a distribution of values of T1 than for a single time constant. Distributions of relaxation times may be characteristic of Cu(II) in glassy solution. Long-pulse saturation recovery and inversion recovery measurements were performed. The temperature dependence of spin-lattice relaxation rates was analyzed in terms of contributions from the direct process, the Raman process, and local modes. It was necessary to include more than one process to fit the experimental data. There was a small contribution from the direct process at low temperature. The Raman process was the dominant contribution to relaxation between about 20 and 60 K. Debye temperatures were between 80 and 120 K. For samples with similar Debye temperatures the coefficient of the Raman process tended to increase as gz increased, as expected if modulation of spin-orbit coupling is a major factor in relaxation rates. Above about 60 K local modes with energies in the range of 260-360 K (180-250 cm-1) dominated the relaxation. For molecules with similar geometry, relaxation rates were faster for more flexible molecules than for more rigid ones. Relaxation rates for the copper protein samples were similar to rates for small molecules with comparable coordination spheres. At each temperature studied the range of relaxation rates was less than an order of magnitude. The spread was smaller between 20 and 60 K where the Raman process dominates, than at higher temperatures where local modes dominate the relaxation. Spin echo dephasing time constants, Tm, were calculated from two-pulse spin echo decays. Near 10 K Tm was dominated by proton spins in the surroundings. As temperature was increased motion and spin-lattice relaxation made increasing contributions to Tm. Near 100 K spin-lattice relaxation dominated Tm.     

Molecular recognition properties of acyclic cucurbiturils toward amino acids,peptides, and a protein

The binding of 1 and 2 toward 19 amino acid amides by ¹H NMR and ITC is reported. Hosts 1 and 2 bind to aromatic or hydrophobic residues by cavity inclusion leaving the cationic residues at the C=O portals. K_a values range from 10² to >10⁶ M^?1 with H-Phe-NH₂, H-Trp-NH₂, and H-Tyr-NH₂ displaying sub-micromolar K_d values. Hosts 1 and 2 bind tightly to dicationic H-Lys-NH₂ and H-Arg-NH₂ which are poor guests for CB[7]. Comparison of the affinity of 1 and 2 toward the amino acid amide, N-acetyl-amino-acid amide, and amino acid forms of Phe revealed that the removal of the NH₃⁺ to O=C and SO₃^? electrostatic interactions costs 3.8 kcal/mol whereas the introduction of an unfavourable CO₂^? to O=C and SO₃^? electrostatic interactions costs 2.1 kcal/mol. Hosts 1 and 2 bind to insulin with low micromolar affinity. Acyclic CB[n] display high affinity toward a wider range of N-terminal amino acids residues than CB[n] which suggests a broad range of applications.