Circular‐Dichroism Studies on Artemisinin and Epiartemisinin and Their β‐Cyclodextrin Complexes in Solution

The circular dichroism (CD) spectra of the powerful antimalarian active principle artemisinin (ART; 1 ) from Artemisia annua, and of epiartemisinin (EPI, 2), its C(7) epimer, were studied in solution in the presence and absence of β‐cyclodextrin (β‐cd). A significant inversion of sign in the region of the second electronic transition was detected. The rotational strengths were successfully calculated within the time‐dependent density functional theory (DFT), which enabled us to establish a correlation between the molecular recognition and the biological acitivities of the two isomers.     

New approach to the determination phosphorothioate oligonucleotides by ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry

This text presents a novel method for the separation and detection of phosphorothioate oligonucleotides with the use of ion pair ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry The research showed that hexafluoroisopropanol/triethylamine based mobile phases may be successfully used when liquid chromatography is coupled with such elemental detection. However, the concentration of both HFIP and TEA influences the final result. The lower concentration of HFIP, the lower the background in ICP-MS and the greater the sensitivity. The method applied for the analysis of serum samples was based on high resolution inductively coupled plasma mass spectrometry. Utilization of this method allows determination of fifty times lower quantity of phosphorothioate oligonucleotides than in the case of quadrupole mass analyzer. Monitoring of ³¹P may be used to quantify these compounds at the level of 80 μg L⁻¹, while simultaneous determination of sulfur is very useful for qualitative analysis. Moreover, the results presented in this paper demonstrate the practical applicability of coupling LC with ICP-MS in determining phosphorothioate oligonucleotides and their metabolites in serum within 7 min with a very good sensitivity. The method was linear in the concentration range between 0.2 and 3 mg L⁻¹. The limit of detection was in the range of 0.07 and 0.13 mg L⁻¹. Accuracy varied with concentration, but was in the range of 3%.     

Double domino Knoevenagel hetero Diels-Alder strategy towards bis-pyrano-1,4-benzoquinones

Several bis-pyrano-l,4-benzoquinones have been synthesized by a double domino Knoevenagel hetero Diels-Alder reaction. The synthetic approach is highly efficient allowing the construction of complex polycyclic scaffolds with six new σ-bonds. These reactions performed more efficiently and more rapidly using microwave irradiation. The resulting bis-pyrano-1,4-benzoquinones are the first examples of a double domino Knoevenagel hetero Diels-Alder reaction. Our approach represents a novel contribution to the chemistry of 2,5-dihydroxy-l,4-benzoquinones and the first general method for the synthesis of bis-pyranobenzoquinones.     

Structural characterization of a pentacene monolayer on an amorphous SiO2 substrate with grazing incidence x-ray diffraction

Grazing incidence X-ray diffraction reveals that a pentacene monolayer, grown on an amorphous SiO2 substrate that is commonly used as a dielectric layer in organic thin film transistors (OTFTs), is crystalline. A preliminary energy-minimized model of the monolayer, based on the GIXD data, reveals that the pentacene molecules adopt a herringbone arrangement with their long axes tilted slightly from the substrate normal. Although this arrangement resembles the general packing features of the (001) layer in single crystals of bulk pentacene, the monolayer lattice parameters and crystal structure differ from those of the bulk. Because carrier transport in pentacene OTFTs is presumed to occur in the semiconductor layers near the dielectric interface, the discovery of a crystalline monolayer structure on amorphous SiO2 has important implications for transport in OTFTs.     

Methane as a Selectivity Booster in the Arc‐Discharge Synthesis of Endohedral Fullerenes: Selective Synthesis of the Single‐Molecule Magnet Dy2TiC@C80 and Its Congener Dy2TiC2@C80

The use of methane as a reactive gas dramatically increases the selectivity of the arc‐discharge synthesis of M‐Ti‐carbide clusterfullerenes (M=Y, Nd, Gd, Dy, Er, Lu). Optimization of the process parameters allows the synthesis of Dy₂TiC@C₈₀‐I and its facile isolation in a single chromatographic step. A new type of cluster with an endohedral acetylide unit, M₂TiC₂@C₈₀, is discovered along with the second isomer of M₂TiC@C₈₀. Dy₂TiC@C₈₀‐(I,II) and Dy₂TiC₂@C₈₀‐I are shown to be single‐molecule magnets (SMM), but the presence of the second carbon atom in the cluster Dy₂TiC₂@C₈₀ leads to substantially poorer SMM properties.     

Improving the universal response of evaporative light scattering detection by mobile phase compensation

Mobile phase compensation, first reported for the charged aerosol detector (CAD), was used as a suitable method to overcome problems related to the mobile phase-dependent response of the evaporative light scattering detector (ELSD). Mobile phase compensation was effectively performed both in the flow injection- and in gradient modes. Without compensation, the response factors of the ELSD for six sulfonamide drugs differed by a factor of two when varying the mobile phase composition between 10 and 90% acetonitrile. This change could be effectively eliminated using the technique of mobile phase compensation, where a secondary pump with a reversed gradient was used to provide the detector with a constant composition of the mobile phase. For identical experimental conditions, the ELSD showed a nearly constant, albeit somewhat reduced, response with compensation. This indicates that under such conditions, the ELSD behaved as a concentration-sensitive detector. The analysis of sulfonamides drugs at 0.05% level using gradient UPLC-ELSD separation with mobile phase compensation is demonstrated.     

Gas chromatographic determination of the interconversion energy barrier for dialkyl 2,3-pentadienedioate enantiomers

The enantiomers of dialkyl 2,3-pentadienedioate undergo interconversion during gas chromatographic separation on chiral stationary phases. In this paper the on-column apparent interconversion kinetic and thermodynamic activation data were determined for dimethyl, diethyl, propylbutyl and dibutyl 2,3-pentadienedioate enantiomers by gas chromatographic separation of the racemic mixtures on a capillary column containing a polydimethylsiloxane stationary phase coupled to 2,3-di-O-methyl-6-O-tertbutyldimethylsilyl-beta-cyclodextrin. A deconvolution method was used to determine the individual enantiomer peak areas and retention times that are needed to calculate the interconversion rate constants and the energy barriers. The apparent rate constants and interconversion energy barriers decrease slightly with an increase in the alkyl chain length of the dialkyl 2,3-pentadienedioate esters. The optimum conformation of the dialkyl 2,3-pentadienedioate molecules, their separation selectivity factors and apparent interconversion enthalpy and entropy data changes with the alkyl chain length. The dependence of the apparent interconversion energy barrier (deltaG(app)(a-->b), deltaG(app)(b-->a)) on temperature was used to determine the apparent activation enthalpy (deltaH(app)(a-->b), deltaH(app)(b-->a)) and apparent entropy (deltaS(app)(a-->b), deltaS(app)(a-->b)) (where a denotes the first and b second eluted enantiomer). The comparison of the activation enthalpy and entropy (deltaS(app)(a-->b), deltaS(app)(a-->b)) indicated that the interconversion of dialkyl 2,3-pentadienedioate enantiomers on the HP-5+Chiraldex B-DM column series is an entropy driven process at 160 degrees C. Data obtained for dimethyl 2,3-pentadienedioate enantiomers on the HP-5+Chiraldex B-DM column series at 120 degrees C (deltaG(app)(a-->b) = 123.3 and deltaG(app)(b-->a) = 124.4 kJ mol(-1)) corresponds (at the 95% confidence interval) with the value of deltaG(#) = 128+/-1 kJ mol(-1) found at this temperature by gas chromatography using a two-dimensional stop flow technique on an empty capillary column [V. Schurig, F. Keller, S. Reich, M. Fluck, Tetrahedron: Asymmetry 8 (1997) 3475].     

Donor-functionalized polydentate pyrylium salts and phosphinines: synthesis, structural characterization, and photophysical properties

A series of donor-functionalized pyrylium salts have been prepared by classical condensation reactions which were further converted into the corresponding thienyl- and pyridyl-substituted polydentate lambda(3)-phosphinines by reaction with P(SiMe(3))(3). Further chemical modification of these phosphorus heterocycles with Hg(OAc)(2) in the presence of methanol resulted in the formation of lambda(5)-phosphinines. The photophysical properties of a selected series of thienyl- and pyridyl-functionalized pyrylium salts, lambda(3)- and lambda(5)-phosphinines, were investigated and the results compared and supported by theoretical calculations on the DFT level. Significant fluorescence was observed for the pyrylium salts and lambda(5)-phosphinines. In contrast, the heteroaromatic substituted lambda(3)-phosphinines show very little emission which is consistent with the low oscillator strength predicted by DFT calculations for this pi-->pi* transition. Furthermore, all three classes of compounds show readily observable phosphorescence in solution, which was determined by time-gated detection at low temperature.     

Development of a CZE method for the determination of mizolastine and its impurities in pharmaceutical preparations using response surface methodology

A fast and selective CZE method for the determination of mizolastine and related impurities is described. Response surface methodology was applied to study the influence of phosphate/triethanolamine (TEA) buffer concentration, heptakis(2,3,6-tri-O-methyl)-beta-CD (TMbetaCD) concentration, voltage and temperature. The optimum conditions were: 105 mM phosphate/TEA buffer (pH 3.0) containing 10 mM TMbetaCD, temperature 19 degrees C and voltage 30 kV. Validation of the method was performed in drug substance and drug product. Robustness was evaluated using a Plackett-Burman design, including pH among the considered factors. Applying the optimal conditions, the nine peaks were baseline separated in about 10 min. The method was applied to the quality control of mizolastine in controlled-release tablets.     

Preparation and Characterization of Niobium Oxide Coated Cellulose Fiber

The Nb₂O₅/cellulose composite was prepared by reacting α-cellulose with NbCl_5-n(OC₂H₅)_n, in nonaqueous solvent, under nitrogen atmosphere and submitting the obtained material to hydrolysis. An increase in the crystallinity degree is observed in the composite material because the precursor reagent reacts with the amorphous phase of the cellulose fibers. Loadings between 4.5 and 16.0% of the oxide were achieved and in every case the oxide particles uniformly cover the fiber surface. Lewis and Brønsted acid sites were determined by using pyridine as the basic molecular probe.