Search for sub-eV mass solar axions by the CERN Axion Solar Telescope with 3He buffer gas

The CERN Axion Solar Telescope (CAST) has extended its search for solar axions by using (3)He as a buffer gas. At T=1.8 K this allows for larger pressure settings and hence sensitivity to higher axion masses than our previous measurements with (4)He. With about 1 h of data taking at each of 252 different pressure settings we have scanned the axion mass range 0.39 eV?m(a)?0.64 eV. From the absence of excess x rays when the magnet was pointing to the Sun we set a typical upper limit on the axion-photon coupling of g(aγ)?2.3×10(-10) GeV(-1) at 95% C.L., the exact value depending on the pressure setting. Kim-Shifman-Vainshtein-Zakharov axions are excluded at the upper end of our mass range, the first time ever for any solar axion search. In the future we will extend our search to m(a)?1.15 eV, comfortably overlapping with cosmological hot dark matter bounds.     

Method for vector characterization of polar liquids using frequency-domain spectroscopy

A device for performing vector transmission spectroscopy on aqueous and polar solvent specimens at terahertz frequencies is presented. The device enables the direct measurement of the complex dielectric function across the terahertz band using a Fourier transform IR spectrometer for lossy solutions. Using microfluidic sampling, specimen handling is straightforward and direct measurements on polar specimens are made possible. The method is scalable to longer or shorter wavelengths.     

Two-site Kondo effect in atomic chains

Linear CoCu(n)Co clusters on Cu(111) fabricated by atomic manipulation represent a two-site Kondo system with tunable interaction. Scanning tunneling spectroscopy reveals oscillations of the Kondo temperature T(K) with the number n of Cu atoms for n≥3. Density functional calculations show that the Ruderman-Kittel-Kasuya-Yosida interaction mediated by the Cu chains causes the oscillations. Calculations find ferromagnetic and antiferromagnetic interaction for n=1 and 2, respectively. Both interactions lead to a decrease of T(K) as experimentally observed.     

Giant dipole resonance in55Mn* studied with the BGO detector

High-energy gamma-rays emitted in the decay of the giant dipole resonance built on excited states of⁵⁵Mn nucleus were measured with a bismuth germanate detector. Resonance parameters were extracted from the fits to the experimental spectra. Two new high-energy calibration points originating from slow-neutron capture in germanium isotopes of bismuth germanate crystal are proposed for large-volume BGO detectors.     

Isotope Effects in the Electrochemical Reduction of Oxalic Acid-D2 and Benzoic Acid-D

Abstract

The electrochemical reduction of model carboxylic acid at lead cathodes in deuterated media was studied for potential use in the synthesis of special deuterated compounds.

Oxalic acid-d₂ in D₂O gives good yields of glyoxylic acid-d₂. An unexpected large isotope effect of 5.3 ± 1.7 was found in this reaction, leading to significant depletion of deuterium content in the aldehyde group.

Benzoic acid-d in CD₃OD/diluted D₂SO₄ yields benzyl alcohol-d, 7,7-d₂. The isotope effect of 2.4 ± 1.0 is within the expected range. No deuterium is incorporated into the aromatic nucleus. Essentially unlabelled benzyl alcohol is obtained in CD₃OH/dil. H₂SO₄.     

Deformation and annealing behaviour of a low carbon high Mn TWIP steel microalloyed with Ti

ABSTRACT

A low carbon high Mn, Ti microalloyed dual phase TWIP steel has been processed through cold rolling and annealing. X-ray diffraction reveals the maximum austenite (≈92%) in HRACST sample whereas, the 50CD sample shows 29% ferrite. The microstructure of HRAC and HRACST samples reveal austenite grains with annealing twins and deformation induced ferrite (DIF). The higher amount of DIF along with deformation twins form during cold deformation. Annealing at 500°C shows recovery, whereas at 700°C shows partial recrystallisation and at 900°C reveals almost full recrystallisation. TEM microstructures of the 900°C for 30?min samples reveal annealing twins with TiC particle. Strong Brass {110}<112> and Goss{110}<001> texture components are observed in HRAC, HRACST and 50CD samples. Goss Twin (GT) {113}<332> and Copper Twin (Cu-T) {552}<115> components are observed in 50CD sample. Addition of Ti results in an average grain size of 20?μm. Maximum YS (1176?MPa) and UTS (1283?MPa) values with the lowest ductility of 11% have been obtained for the 50CD sample which is related to the formation of extensive deformation twin and a higher fraction of DIF. 700°C-30?min and 700°C-60?min samples show an increase in ductility (23% and 34%, respectively) with a marginal decrease in tensile strength (1054?MPa). Annealing at 900°C shows ductility restoration up to 60% with higher tensile strength compared to HRACST sample. Ductile fracture of HRAC and HRACST samples transform to brittle fracture in the 50CD sample. Annealing at 900°C for 30?min shows ductile fracture with some (Fe, Mn)S and TiC particles.     

Boat-like Au nanoparticles embedded mesoporous γ-Al2O3 films: an efficient SERS substrate

A new water-dispersible nanostructure based on magnetite (Fe₃O₄) and usnic acid (UA) was prepared in a well-shaped spherical form by a precipitation method. Nanoparticles were well individualized and homogeneous in size. The presence of Fe₃O₄@UA was confirmed by transmission electron microscopy, Fourier transform-infrared spectroscopy, and X-ray diffraction. The UA was entrapped in the magnetic nanoparticles during preparation and the amount of entrapped UA was estimated by thermogravimetric analysis. Fabricated nanostructures were tested on planktonic cells growth (minimal inhibitory concentration assay) and biofilm development on Gram-positive Staphylococcus aureus (S. aureus), Enterococcus faecalis (E. faecalis) and Gram-negative Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) reference strains. Concerning the influence of Fe₃O₄@UA on the planktonic bacterial cells, the functionalized magnetic nanoparticles exhibited a significantly improved antimicrobial activity against E. faecalis and E. coli, as compared with the Fe₃O₄ control. The UA incorporated into the magnetic nanoparticles exhibited a very significant inhibitory effect on the biofilm formed by the S. aureus and E. faecalis, on a wide range of concentrations, while in case of the Gram-negative microbial strains, the UA-loaded nanoparticles inhibited the E. coli biofilm development, only at high concentrations, while for P. aeruginosa biofilms, no inhibitory effect was observed. The obtained results demonstrate that the new water-dispersible Fe₃O₄@UA nanosystem, combining the advantages of the intrinsic antimicrobial features of the UA with the higher surface to volume ratio provided by the magnetic nanocarrier dispersible in water, exhibits efficient antimicrobial activity against planktonic and adherent cells, especially on Gram-positive strains.     

Characterization methods for liquid interfacial layers

Liquid interfaces are met everywhere in our daily life. The corresponding interfacial properties and their modification play an important role in many modern technologies. Most prominent examples are all processes involved in the formation of foams and emulsions, as they are based on a fast creation of new surfaces, often of an immense extension. During the formation of an emulsion, for example, all freshly created and already existing interfaces are permanently subject to all types of deformation. This clearly entails the need of a quantitative knowledge on relevant dynamic interfacial properties and their changes under conditions pertinent to the technological processes. We report on the state of the art of interfacial layer characterization, including the determination of thermodynamic quantities as base line for a further quantitative analysis of the more important dynamic interfacial characteristics. Main focus of the presented work is on the experimental possibilities available at present to gain dynamic interfacial parameters, such as interfacial tensions, adsorbed amounts, interfacial composition, visco-elastic parameters, at shortest available surface ages and fastest possible interfacial perturbations. The experimental opportunities are presented along with examples for selected systems and theoretical models for a best data analysis. We also report on simulation results and concepts of necessary refinements and developments in this important field of interfacial dynamics.     

First observation of the doubly charmed baryon Xi(+)(cc)

We observe a signal for the doubly charmed baryon Xi(+)(cc) in the charged decay mode Xi(+)(cc)-->Lambda(+)(c)K-pi(+) in data from SELEX, the charm hadroproduction experiment at Fermilab. We observe an excess of 15.9 events over an expected background of 6.1+/-0.5 events, a statistical significance of 6.3sigma. The observed mass of this state is 3519+/-1 MeV/c(2). The Gaussian mass width of this state is 3 MeV/c(2), consistent with resolution; its lifetime is less than 33 fs at 90% confidence.