Fabrication and characterization of high-temperature microreactors with thin film heater and sensor patterns in silicon nitride tubes

In this paper the fabrication and electrical characterization of a silicon microreactor for high-temperature catalytic gas phase reactions, like Rh-catalyzed catalytic partial oxidation of methane into synthesis gas, is presented. The microreactor, realized with micromachining technologies, contains silicon nitride tubes that are suspended in a flow channel. These tubes contain metal thin films that heat the gas mixture in the channel and sense its temperature. The metal patterns are defined by using the channel geometry as a shadow mask. Furthermore, a new method to obtain Pt thin films with good adhesive properties, also at elevated temperatures, without adhesion metal is implemented in the fabrication process. Based on different experiments, it is concluded that the electrical behaviour at high temperatures of Pt thin films without adhesion layer is better than that of Pt/Ta films. Furthermore, it is found that the temperature coefficient of resistance (TCR) and the resistivity of the thin films are stable for up to tens of hours when the temperature-range during operation of the microreactor is below the so-called "burn-in" temperature. Experiments showed that the presented suspended-tube microreactors with heaters and temperature sensors of Pt thin films can be operated safely and in a stable way at temperatures up to 700 degrees C for over 20 h. This type of microreactor solves the electrical breakdown problem that was previously reported by us in flat-membrane microreactors that were operated at temperatures above 600 degrees C.     

Results of a European interlaboratory study for the determination of oxytetracycline in pig muscle by HPLC.

An interlaboratory study was organised in 1996 in order to determine laboratory testing performance for measuring oxytetracycline (OTC) and 4-epioxytetracycline (4-epiOTC) residues in pig muscle. The organisation was designed according to the 'International Harmonised Protocol for Proficiency Testing of (Chemical) Analytical Laboratories' produced by the Association of Official Analytical Chemists (AOAC International) and the International Union of Pure and Applied Chemistry (IUPAC). Fourteen National Reference Laboratories (NRLs) out of the 15 asked to participate agreed to analyse the samples. These laboratories were from 13 different European Union (EU) Member States and each participant was allowed to use the extraction method of their own choice but had to use liquid chromatography as the analytical technique. Most of the methods used were based on UV detection (simple wavelength or diode-array detection) but some involved fluorimetric detection. The production of incurred samples was prepared on-site. The OTC and 4-epiOTC concentrations present in the samples were determined by taking the mean of the results (excluding outliers) and the deviation of each result from the assigned value was measured. The performance of the laboratories was evaluated by calculating the 'z-scores'. The results were globally satisfactory and showed that all 14 laboratories were capable of determining OTC and 4-epiOTC in pig muscle with satisfactory accuracy. Only two laboratories obtained a questionable result in terms of repeatability.     

Uses and analyses of curtin-hammett/winstein-holness systems involving second order reactions

The Curtin-Hammett (C-H) principle and the Winstein-Holness (W-H) equation approximate the product ratio and overall rate constant of reaction for systems involving a starting material which exists in two forms, each of which reacts via first-order kinetics to give a different product. The C-H/W-H approximations are valid when the rates of isomer interconversion are significantly faster than the rates of product formation. The present treatment encompasses non-first-order reactions to product. A numerical predictor-corrector technique is used to show (1) that relative reagent concentration can affect both the product ratio and the observed rates of product formation; (2) that the absolute concentration of reagent and substrate can affect the kinetics; and (3) that factors (1) and (2) above can affect the validity of the C-H/W-H approximations for non-first-order C-H/W-H schemes.     

Singlet fission in a hexacene dimer: energetics dictate dynamics

Singlet fission (SF) is an exciton multiplication process with the potential to raise the efficiency limit of single junction solar cells from 33% to up to 45%. Most chromophores generally undergo SF as solid-state crystals. However, when such molecules are covalently coupled, the dimers can be used as model systems to study fundamental photophysical dynamics where a singlet exciton splits into two triplet excitons within individual molecules. Here we report the synthesis and photophysical characterization of singlet fission of a hexacene dimer. Comparing the hexacene dimer to analogous tetracene and pentacene dimers reveals that excess exoergicity slows down singlet fission, similar to what is observed in molecular crystals. Conversely, the lower triplet energy of hexacene results in an increase in the rate of triplet pair recombination, following the energy gap law for radiationless transitions. These results point to design rules for singlet fission chromophores: the energy gap between singlet and triplet pair should be minimal, and the gap between triplet pair and ground state should be large.

We report the synthesis and photophysical characterization of highly exoergic singlet fission in a hexacene dimer revealing exciton dynamics that follow the energy gap law.     

Creation and comparison of MS/MS spectral libraries using quadrupole ion trap and triple-quadrupole mass spectrometers

Searchable libraries of MS/MS spectra, obtained using liquid chromatography/tandem mass spectrometry (LC/MS/MS) with data-dependent scan mode switching on both quadrupole ion trap and triple-quadrupole mass spectrometers in conjunction with electrospray ionization, are presented. The effects on library search scores of changing the parameters for producing collision-induced dissociation (CID) on both instrument types are systematically evaluated. These observations serve as a basis for determining a universal set of conditions for building MS/MS libraries. A group of 19 closely related steroids was used. The ability to obtain library-searchable spectra at low concentrations is demonstrated for the analysis of a sample of progesterone spiked with hydroxyprogesterone impurities at 0.1 and 0.01%.     

Wavelength-agile H2O absorption spectrometer for thermometry of general combustion gases

Using a novel Fourier-domain mode-locking (FDML) laser scanning 1330-1380 nm, we have developed a gas thermometer based on absorption spectroscopy that is appropriate for combustion gases at essentially arbitrary conditions. The path-integrated measurements are particularly useful in homogeneous environments, and here we present measurements in a controlled piston engine and a shock tube. Engine measurements demonstrate a RMS temperature precision of ±3% at 1500 K and 200 kHz bandwidth; the precision is improved dramatically by averaging. Initial shock tube measurements place the absolute accuracy of the thermometer within ∼2% to 1000 K. The sensor performs best when significant H₂O vapor is present, but requires only at 300 K, at 1000 K, or at 3000 K for 2% accurate thermometry, assuming a 4 kHz measurement bandwidth (200 kHz scans with 50 averages). The sensor also provides H₂O mole fraction and shows potential for monitoring gas pressure based on the broadening of spectral features. To aid in designing other sensors based on high-temperature, high-pressure H₂O absorption spectroscopy, a database of measured spectra is included.     

Solid-phase Pd-catalysed cross-coupling methods for the construction of π-conjugated peptide nanomaterials

We describe the development of two procedures for the synthesis of peptides that are embedded with a variety of π-conjugated semi-conducting oligomers. These procedures utilise solid-phase variants of classical palladium-catalysed cross-couplings commonly used to prepare π-conjugated oligomers. The resulting peptide–π–electron hybrids are soluble in aqueous media and self-assemble to produce 1D nanostructures, simultaneously forming networks of π-stacked conduits. The procedures have allowed for the inclusion of complex chromophores including mixed aryl units, ethynylene linkers and sexithiophenes where the latter peptide's nanostructures demonstrated substantial conductivity when employed as an active layer in a field-effect transistor.     

The acidic properties of stoichiometric and nonstoichiometric B-P-O catalysts

A spectrophotometric method has been employed to measure the surface acidities of stoichiometric and nonstoichiometric B-P-O catalysts. Three phosphorus/boron ratios, 0.7, 1.0, 1.3, and three pretreatment temperatures, 200, 375, and 600°C, were employed. The data obtained appear to be consistent with earlier measurements of surface acidity by the Hammett indicator method and by infrared spectroscopy and with the results of studies of probe reactions.     

Optimization of Biocompatibility for a Hydrophilic Biological Molecule Encapsulation System

Despite considerable advances in recent years, challenges in delivery and storage of biological drugs persist and may delay or prohibit their clinical application. Though nanoparticle-based approaches for small molecule drug encapsulation are mature, encapsulation of proteins remains problematic due to destabilization of the protein. Reverse micelles composed of decylmonoacyl glycerol (10MAG) and lauryldimethylamino-N-oxide (LDAO) in low-viscosity alkanes have been shown to preserve the structure and stability of a wide range of biological macromolecules. Here, we present a first step on developing this system as a future platform for storage and delivery of biological drugs by replacing the non-biocompatible alkane solvent with solvents currently used in small molecule delivery systems. Using a novel screening approach, we performed a comprehensive evaluation of the 10MAG/LDAO system using two preparation methods across seven biocompatible solvents with analysis of toxicity and encapsulation efficiency for each solvent. By using an inexpensive hydrophilic small molecule to test a wide range of conditions, we identify optimal solvent properties for further development. We validate the predictions from this screen with preliminary protein encapsulation tests. The insight provided lays the foundation for further development of this system toward long-term room-temperature storage of biologics or toward water-in-oil-in-water biologic delivery systems.     

Anthropogenic changes of nitrogen loads in a small river: external nutrient sources vs. internal turnover processes

Anthropogenic nutrient inputs increase the N-load in many aquatic systems, leading to eutrophication and potential changes of biological N-retention capacity. In this study, nitrate inputs in a small river were investigated along a gradient of anthropogenic influence. We aimed to determine changes in nitrate load and isotope signatures in the water column and to identify the anthropogenic influence on biological nitrogen assimilation and nitrification or denitrification in sediments. In seasonal sampling campaigns, we analysed dissolved inorganic nitrogen concentrations, and stable isotopes of nitrate. To differentiate rates of nitrate production and consumption in the pristine vs. agricultural river section, intact sediment cores were incubated with ¹⁵N-labelled nitrate. δ¹⁵N values of nitrate in the pristine river section were low, reflecting natural sources, but, as expected, increased with nitrate concentration in all seasons along the gradient. In general, nitrate retention and consumption were higher in the anthropogenically impacted than in the pristine river section, and nitrate consumption exceeded production. In addition to our measurements, modelled results also show that even in a small river, the anthropogenically enhanced consumption capacity is overwhelmed by surplus N-inputs, and nitrate consumption cannot increase in turn with external loads.