A quick accelerating microwave-assisted sustainable technique: permutated spiro-casing for imaging experiment

Molecular Diversity - A quick access tool for the one-pot, chromatography-free synthesis of the diversified dihydrospiro[indeno[1,2-b]pyridine-4,3′-indoline or...     

Mullite Fibre Mats by a Sol-Gel Spinning Technique

Fine grained, microcrystalline mullite (Al_4+2x Si_2–2x O_10–x) fibre mats with a web-like structure were fabricated by a sol-gel spinning technique using a multi-orifice spinneret. Points of contact in gel fibre mats helped in the formation of a web-like fibrous body having reasonable strength and very little dust formation after calcination. Strong and resilient fibres with diameters in the range 3–12 m were obtained by a single-step sol-gel method from spinnable sols devoid of organics as the binder aid. Crystallization of -alumina and mullite at about 900°C and 1250°C, respectively was confirmed by differential thermal analysis (DTA) and X-ray diffraction (XRD). Thermogravimetry (TG) indicated the removal of most of the volatiles at about 500°C accompanied by a weight loss of about 48%. Scanning electron microscopy (SEM) shows the presence of small grains (80–150 nm in size) in the fibres calcined at 1250°C. Fourier transformed infrared spectroscopy (FTIR) indicated the sequence of transformations taking place during heat-treatment of gel fibres at different temperatures. The individual fibres in the mats calcined at 1250°C exhibited a tensile strength of 1300–1600 MPa.     

Ethanolic or Aqueous Formic Acid (1:1) - A New Efficient Reagent for the Regeneration of Ketones from Phenylhydrazones

50% Ethanolic or aqueous formic acid has been found to be extremely efficacious for the regeneration of aliphatic and aromatic ketones from phenylhydrazones.     

Fluorometric and isothermal titration calorimetric studies on binding interaction of a telechelic polymer with sodium alkyl sulfates of varying chain length

Steady-state fluorescence measurements and isothermal titration calorimetric experiments have been performed to study the interaction between a telechelic polymer, pyrene-end-capped poly(ethylene oxide) (PYPY), and sodium alkyl sulfate surfactants having decyl, dodecyl, and tetradecyl hydrocarbon tails. Fluorometric results suggest polymer-surfactant interaction in the very low range of polymer concentrations. The relative variation in the excimer to monomer pyrene emission intensities with varying surfactant concentration reveals that initial addition of surfactant favors intramolecular preassociation until the surfactant molecules start binding with the ethylene oxide (EO) chain. With the growing number of surfactant aggregates along the EO chain, the association becomes hindered due to the polyelectrolyte effect. The results from microcalorimetric titrations in the low concentration range of PYPY solution (approximately 10(-6) M) with alkyl sulfates suggest two kinds of surfactant-polymer interactions, one with the polymer hydrophobic end groups and the other with the ethylene oxide backbone. The overall polymer-surfactant interaction starts at a much lower surfactant concentration for the hydrophobically modified polymers compared to that in the case of unsubstituted poly(ethylene oxide) homopolymer. From the experiments critical aggregation concentration values and the second critical concentration where free micelles start forming have been determined. An endeavor has been made to unveil the mechanism underlying the corresponding associations of the surfactants with the polymer.     

Improved in‐solution trypsin digestion method for methanol–chloroform precipitated cellular proteomics sample

Methanol–chloroform based protein precipitation is an essential step in many liquid chromatography–tandem mass spectrometry‐based cellular proteomics applications. However, re‐solubilization of the total protein precipitate is difficult using regular in‐solution digestion protocol. Sodium deoxycholate is reported as an efficient surfactant for re‐solubilization of membrane fractions. In this study, we demonstrated an application combining methanol–chloroform based protein precipitations and deoxycholic acid assisted re‐solubilization of pellets to evaluate the improvement of protein identifications in mass spectrometry‐based bottom‐up proteomics. We evaluated the modified method using an equal amount of Raw 264.7 mouse macrophage cell lysate. Detailed in‐solution trypsin digestion studies were presented on methanol–chloroform precipitated samples with or without deoxycholic acid treatments and compared with popular sample digestion methods. A mass spectrometric analysis confirmed an 82% increase in protein identification in deoxycholic acid‐treated samples compared to other established methods. Furthermore, liquid chromatography–tandem mass spectrometry analysis of an equal amount of proteins from methanol–chloroform precipitated, and methanol–chloroform/deoxycholic acid‐treated macrophage cell lysate showed a 14% increase and 27% unique protein identifications. We believe this improved digestion method could be a complementary or alternative method for mammalian cell sample preparations where sodium dodecyl sulfate based lysis buffer is frequently used.     

Effect of nanocavity confinement on the rotational relaxation dynamics: 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine in micelles

In continuation of our recent study on the steady state photophysics of a biologically active beta-carboline derivative, 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), in the present article we have investigated the effect of nanocavity confinement on the excited state dynamics and rotational relaxation of the probe using picosecond time resolved fluorescence and fluorescence anisotropy techniques. The polarity dependent intramolecular charge transfer process is responsible for the remarkable sensitivity of this biological fluorophore in micellar environments. The fluorescence anisotropy decay of AODIQ incorporated inside the micelle is biexponential. The rotational motion of the probe was interpreted on the basis of a two step model consisting of a fast restricted rotation of the probe and a slow lateral diffusion of the probe in the micelle; both coupled to the overall rotation of the micelle. Experimental results reveal that micellar environment causes significant retardation of both the wobbling as well as the translational motion of the probe.     

A clay-mediated, regioselective synthesis of 2-(aryl/alkyl)amino-thiazolo[4,5-c]carbazoles

The 3-aminocarbazoles 1a-e were condensed with phenyl and benzyl isothiocyanates on montmorillonite K10 clay or TLC-grade silica gel at room temperature to furnish efficiently the N-phenyl and N-benzylthioureidocarbazoles, 2a-e and 2f, respectively, within minutes. When adsorbed on montmorillonite K10 clay impregnated with para-toluene sulfonic acid (1:1, w/w) and heated at 60-70 °C, 2a-e and 2f furnished the 2-anilino and 2-benzylaminothiazolo[4,5-c]carbazoles, 3a-e and 3f, respectively, regioselectively in high yields. The cyclisation was also effective for the N-methylthioureidocarbazoles 2g-i.     

Open air O-arylation reaction of phenols with aryl halides catalyzed by polymer-anchored copper(II) complexes

Two copper complexes were synthesized from macroporous chloromethylated polystyrene beads. The first one was prepared by sequential attachment of imidazole and copper acetate with chloromethylated polystyrene-divinyl benzene copolymer, and the second one was prepared from 4-vinylpyridine and copper acetate with chloromethylated polystyrene-divinyl benzene copolymer. These catalysts showed excellent catalytic activity in O-arylation reaction of aryl halides with phenol in dimethylsulfoxide using potassium carbonate at 130 °C under open air conditions to give diaryl ethers in high yields. Less reactive aryl bromides and aryl chlorides have also been shown to react with phenols to give good yields of the diaryl ethers. The effects of various parameters such as solvent, catalyst from different copper salt and base on the reaction system were studied. The reaction is applicable to a wide variety of substituted aryl halides and phenols with different steric and electronic properties. These catalysts were recovered by simple filtration, and the reusability experiments showed that these catalysts can be used five times without much loss in the catalytic activity.     

Structure-property relationships for self-assembled zinc chlorin light-harvesting dye aggregates

A series of zinc 3(1)-hydroxymethyl chlorins 10 a-e and zinc 3(1)-hydroxyethyl chlorins 17 with varied structural features were synthesized by modifying naturally occurring chlorophyll a. Solvent-, temperature-, and concentration-dependent UV/Vis and CD spectroscopic methods as well as microscopic investigations were performed to explore the importance of particular functional groups and steric effects on the self-assembly behavior of these zinc chlorins. Semisynthetic zinc chlorins 10 a-e possess the three functional units relevant for self-assembly found in their natural bacteriochlorophyll (BChl) counterparts, namely, the 3(1)-OH group, a central metal ion, and the 13(1) C==O moiety along the Q(y) axis, and they contain various 17(2)-substituents. Depending on whether the zinc chlorins have 17(2)-hydrophobic or hydrophilic side chains, they self-assemble in nonpolar organic solvents or in aqueous media, respectively. Zinc chlorins possessing at least two long side chains provide soluble self-aggregates that are stable in solution for a prolonged time, thus facilitating elucidation of their properties by optical spectroscopy. The morphology of the zinc chlorin aggregates was elucidated by atomic force microscopy (AFM) studies, revealing well-defined nanoscale rod structures for zinc chlorin 10 b with a height of about 6 nm. It is worth noting that this size is in good accordance with a tubular arrangement of the dyes similar to that observed in their natural BChl counterparts in the light-harvesting chlorosomes of green bacteria. Furthermore, for the epimeric 3(1)-hydroxyethyl zinc chlorins 17 with hydrophobic side chains, the influence of the chirality center at the 3(1)-position on the aggregation behavior was studied in detail by UV/Vis and CD spectroscopy. Unlike zinc chlorins 10, the 3(1)-hydroxyethyl zinc chlorins 17 formed only small oligomers and not higher rod aggregate structures, which can be attributed to the steric effect imposed by the additional methyl group at the 3(1)-position.