Biophysical characterization of complexation of DNA with block copolymers of poly(2-dimethylaminoethyl) methacrylate, poly(ethylene oxide), and poly(propylene oxide)

The interactions of DNA (salmon testes) with two new cationic block copolymers made of poly(2-dimethylaminoethyl) methacrylate and poly(ethylene oxide), PEO-pDMAEMA, or poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), L92-pDMAEMA, were studied with the aim to understand their different in vitro transfection efficiencies when used as nonviral delivery vectors. PEO-pDMAEMA does not show surface activity while L92-pDMAEMA is as surface active as its parent Pluronic L92. Surface tension, titration microcalorimetry, ethidium bromide displacement, and zeta-potential measurements were carried out in phosphate buffers at pH 5 and 7. The association of L92-pDMAEMA with DNA was strongly exothermic at both pHs; the critical aggregation concentration (CAC) corresponded to a N/P ratio of 0.3, the maximum energy evolved was reached for N/P ratios of 0.82 and 1.27 at pH 5 and pH 7, respectively, and the saturation occurred for N/P ratios close to 2. The presence of L92 in the structure of this new block copolymer apparently did not modify the thermodynamic parameters of the interaction with DNA. In contrast, the interaction with PEO-pDMAEMA was significantly less exothermic, and CAC and saturation occurred for N/Ps equal to 0.43 and 1.37, respectively. The strong affinity of L92-pDMAEMA for DNA was reflected in its capacity to displace ethidium bromide and in the jump in the values of the zeta potential when N/P is near 1. Above the N/P ratio at which electroneutral polyplexes are formed, only at pH 5 an excess of L92-pDMAEMA is incorporated in the complexes, resulting in positively charged complexes. The profile of the zeta-potential values obtained for mixtures of L92-pDMAEMA with Pluronic P123 showed a shift to a lower N/P ratio, owing to an easier interaction of L92-pDMAEMA molecules with DNA in the presence of P123. Additionally, a visual inspection of the systems indicates that P123 contributes to stabilize/solubilize the DNA/cationic polymer aggregates, by avoiding the typical phase separation near the charge neutralization point. The information obtained can be particularly useful to optimize the conditions to form efficient polyplexes for gene delivery systems.     

The ortho effect in the mass spectra of ortho/para isomers of bisphenol a derivatives and related compounds

New examples of the ortho effect in bisphenol A derivatives including interaction of the hydrogen of the ortho-hydroxy group with the neighbouring aromatic ring have been observed. The characteristic ions [M ? PhOH]^+middot; (m/z = 134) and [M ? CH₃ ? PhOH]⁺ (m/z = 119) were shown to form through the hydrogen transfer from hydroxy and isopropyl groups, respectively. The spectra of cyclic derivatives having ortho-hydroxy functions show [M ? 43]⁺, [M ? C₈H₉O]⁺, m/z = 147, m/z = 135 and [M ? C₉H₁₀O]⁺ ions. The proposed mechanims of the corresponding transformations were supported by mass spectra of deuterated analogues, methyl and trimethyl silyl ethers.     

NMR determination of enantiomeric composition of 1-substituted 3-amino-1,2-dicarba-closo-dodecaboranes using Eu(hfc)3

Experimental conditions for determination of enantiomeric composition of 1-substituted 3-aminocarboranes by ¹H and ¹³C NMR spectroscopy using chiral shift reagent Eu(hfc)₃ have been found.     

Determination of fat-soluble vitamins in yogurt by HPLC with electrochemical detection

A method employing HPLC with electrochemical detection for the rapid and simultaneous determination of vitamins A, D(3) and E is described. The method uses a C-18 reverse phase column and 2.5 mM HAcO-NaAcO in methanol-water (99:1, v/v) solution as the mobile phase. The compounds are quantified using amperometric detection with a glassy carbon electrode at a potential of + 1300 mV (vs. Ag/AgCl) and the results are compared with those obtained using UV detection at a wavelength of 280 nm. The method was successfully applied to the analysis of vitamins A, D(3) and E in yogurt samples. After saponification, fat-soluble vitamins were extracted and the methanolic solution of the extracts was injected directly into the chromatographic system, avoiding the clean-up step which is necessary when no electrochemical detection is used. Good recovery percentages were obtained.     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

Determination of metal concentration in fat supplements for swine nutrition by atomic absorption spectroscopy

The presence of some essential and toxic metals in fat supplements for swine diet was investigated. Collected samples represented a relevant production of the Italian industry. In particular, some samples were enriched with antioxidants or waste cooking oils. The method for the determination of Ca, Cu, Cd, Fe, Mg, Mn, Ni, Pb, and Zn in fat samples was developed by means of a certified reference material (CRM 186) and a representative fatty sample (RFS). All samples were digested in closed vessels in a microwave oven and then analyzed by flame atomic absorption or graphite furnace atomic absorption spectrometry. The entire analytical method provided a satisfactory repeatability and reproducibility confirmed by agreement between the experimental recovery data obtained for the CRM 186 sample and, with the method of standard additions, for the RFS material. The samples generally showed a small amount of metals compared with the recommended daily intake for the essential elements. On the other hand, some samples contained a significant concentration, from an analytical point of view, of Cd, Ni, and Pb. Principal component analysis (PCA) was applied to inspect the experimental data obtained from samples analysis. Basically no differences were detected in terms of metal concentration among the fat supplements analyzed.     

Polarographic determination of glycine with a dropping copper amalgam electrode

The anodic oxidation of a dropping copper amalgam electrode in presence of dilute solutions of glycine in 0.50 M NaClO₄ has been studied. An anodic wave at ?0.28V (SCE) is observed, yielded by diffusion of glycinate anion in the solution towards the electrode surface. The wave-heights increase with the glycinate concentration (function of glycine concentration and pH value) until the anodic oxidation is controlled by the metal diffusion into mercury. The effect of pH is interpreted by attributing it to the depolarizer effects at glycinate anion even though the zwitterion is present in much larger concentrations. The applicability of anodic oxidation of a dropping copper amalgam electrode in the determination of glycine in the range of concentrations 10^?4–10^?2M with a rigorous control of pH (8.0<pH<10.5) is shown. The standard deviation of the proposed method is 4.1% and the minimum concentration determinable is in the 1×10^?4M range.     

Complexing processes in M(II)-dithiomalonamide-diacetyl triple systems (M= Ni,Cu) in ethanol solution and in a metal(II)hexacyanoferrate(II) gelatin-immobilized matrix materials

The complexing processes in the M ^II -dithiomalonamide-diacetyl triple system (M=Ni, Cu) occuring in the nickel(II)- and copper(II)hexacyanoferrate(II) gelatin-immobilized matrix in contact with aqueous alkaline solutions (pH~12) containing dithiomalonamide and diacetyl at room temperature, and between MCl₂, dithiomalonamide and diacetyl in EtOH solutions upon heating to$80°C, have been studied. In the Ni ^II -dithiomalonamide-diacetyl system, template synthesis occurs in EtOH solution but does not occur in the gelatin-immobilized matrix, whereas in the Cu ^II -dithiomalonamide-diacetyl system, template synthesis occurs in the gelatin-immobilized matrix but not in EtOH solution. Dithiomalonamide and diacetyl are the ligand synthons in the processes indicated.     

Blood lead monitoring in Italy: Assessment of the quality of results obtained between 1992 and 1994

Between 1992 and 1994, a new screening campaign for blood Pb monitoring in the Italian general population was carried out. Since the first campaign (started in 1978, in accomplishment of the European Community Directive 77/312/EEC) a working group of the Laboratory of Clinical Biochemistry at the Italian National Institute of Health (Istituto Superiore di Sanità), as the Reference Centre (RC), has coordinated the activity of various laboratories spread over the national territory. Appropriate quality assurance procedures, including an external quality assessment scheme (EQAS), were elaborated. Within the EQAS, three or four trials were carried out every year. Each laboratory participating in the trial analyzed eight control samples prepared from cow blood at different Pb concentrations. The results obtained by each peripheral laboratory and the RC between 1992 and 1994 have been compared by regression analysis. The same statistical method was adopted to compare the results obtained by each peripheral laboratory and the RC in the duplicate analysis of about 10 per cent of the human samples collected during the 1992–1994 monitoring campaign. There was no evidence of systematic differences between the regression lines obtained on control and human samples. In spite of the lower Pb concentration in the control samples analyzed during the 1992–1994 campaign, the analytical performance of the laboratories was better than that obtained in the previous screening campaign (1985–1986). Blood Pb levels observed in human samples collected between 1992 and 1994, confirm the downward time trend observed in the campaigns carried out in 1978–1979, 1980–1981 and 1985–1986. This study confirms that the results obtained in an EQAS are representative of the actual performance in the analysis of real (human) samples.