Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium

The interactions between oppositely charged surfactant-polymer systems have been studied using surface tension and conductivity measurements and the dependence of aggregation phenomenon over the polyelectrolyte concentration and chain length of cationic ATAB surfactants, cetyltrimethyl ammonium bromide (CTAB), tetradecyltrimethyl ammonium bromide (TTAB), and dodecyltrimethyl ammonium bromide (DTAB) have been investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolyte at critical aggregation concentration (cac). The cac values of ATAB surfactants in the presence of anionic polyelectrolyte, sodium carboxy methyl cellulose (NaCMC), are considerably lower than their critical micelle concentration (cmc). After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in polyelectrolyte aqueous solution than in pure water. Among the cationic surfactants (i.e., CTAB, TTAB, and DTAB), DTAB was found to have least interaction with NaCMC. Surfactants with longer tail size strongly favor the interaction, indicating the dependence of aggregation phenomenon on the structure, morphology, and tail length of the surfactant.      

Application of hollow fiber supported liquid membrane for the separation of americium from the analytical waste

Americium from analytical solid waste containing U and metallic impurities was separated using hollow fiber supported liquid membrane (HFSLM) technique impregnated with DHOA–TODGA from nitric acid medium. An aliquot of 5 g of the solid waste containing Am (19.95 mg) as minor actinide and of U (2,588 mg), Fe (1,360 mg), Ca (1,810 mg) and Na (3,130 mg) as major impurities was processed. The feed solution obtained after the dissolution of the residue in ~4 M HNO₃ was passed through HFSLM module. In the first stage using 1 M DHOA–dodecane U was recovered while Am and other impurities were left in the raffinate. In the second stage, 0.5 M DHOA + 0.1 M TODGA/dodecane was used for the separation of Am from other impurities. Though, majority of the elements were separated in this cycle, Ca was co extracted along with the americium. CMPO extraction chromatographic technique was used for further separation of americium from Ca. Significant decontamination factors were achieved in this three step separation process with respect to U, Fe, Na and Ca with ~77 % recovery of americium.     

Glabridin,a Stable Flavonoid of Glycyrrhiza glabra: HPTLC Analysis of the Traditional Formulation

JPC – Journal of Planar Chromatography – Modern TLC - A novel HPTLC method has been developed for the estimation of glabridin in Licorice rhizome and its Unani polyherbal formulation...     

Comparative study of Zn(II) and Cd(II) ions adsorption on charged carbon nano tubes: molecular dynamics approach

A comparative study was performed on adsorption process of Zn(II) and Cd(II) ions using charged carbon nano tubes (CNTs). The results show that the adsorption behavior of Zn(II) and Cd(II) ions have different patterns. To understand the reason for this difference, the ion–water complex properties and the reduced density of water around CNT were studied. The results reveal that the water molecules make high-, low-, and bulk regions around CNTs, which can affect the ion movement toward CNT. The ion–water complex characteristics during the adsorption demonstrated that the Cd(II)–water complex has a large number of exchange events between 4 and 8 coordinate numbers where Zn(II) has only 6 coordinate numbers during the adsorption process. The Cd(II)–water complex was found less stable and therefore has faster translational dynamics. These properties help cadmium ion to be adsorbed faster into CNT despite its heavier weight.     

Densities,Refractive Indices,Ultrasonic Speeds and Excess Properties of Acetonitrile + Poly(ethylene glycol) Binary Mixtures at Temperatures from 298.15 to 313.15 K

The densities, ρ, refractive indices, n _D, and ultrasonic speeds, u, of binary mixtures of acetonitrile (AN) with poly(ethylene glycol) 200 (PEG200), poly(ethylene glycol) 300 (PEG300) and poly(ethylene glycol) 400 (PEG400) were measured over the entire composition range at temperatures (298.15, 303.15, 308.15 and 313.15) K and at atmospheric pressure. From the experimental data, the excess molar volumes, \( V_{\text{m}}^{\text{E}} \) , deviations in refractive indices, \( \Delta n_{\text{D}} \) , excess molar isentropic compressibility, \( K_{{s , {\text{m}}}}^{\text{E}} \) , excess intermolecular free length, \( L_{\text{f}}^{\text{E}} \) , and excess acoustic impedance, Z ^E, have been evaluated. The partial molar volumes, \( \overline{V}_{\text{m,1}} \) and \( \overline{V}_{\text{m,2}} \) , partial molar isentropic compressibilities, \( \overline{K}_{{s , {\text{m,1}}}} \) and \( \overline{K}_{{s , {\text{m,2}}}} \) , and their excess values over whole composition range and at infinite dilution have also been calculated. The variations of these properties with composition and temperature are discussed in terms of intermolecular interactions in these mixtures. The results indicate the presence of specific interactions among the AN and PEG molecules, which follow the order PEG200 < PEG300 < PEG400.     

Preparation of a solid-state ion-selective electrode based on polypyrrole conducting polymer for magnesium ion

In this study, a potentiometric sensor based on a pencil graphite electrode (PGE) coated with polypyrrole doped with Titan yellow dye (PPy/TY) was prepared for potentiometric determination of magnesium ion in aqueous solutions. The structural characteristics of magnesium sensor electrode (PGE/PPy/TYMg) were studied using scanning electron microscopy and Fourier transform infrared along with energy-dispersive spectroscopy. Under the optimal conditions, the electrode reveals a good Nernstian behavior with slope of 28.27 ± 0.40 mV per decade over the concentration range of 1.0 × 10^?5–5.0 × 10^?2 M and a detection limit of 6.28 × 10^?6 M. The potentiometric response of fabricated electrode toward magnesium ion was found to be independent of the pH of the test solution in the pH range of 4.5–8.0. The electrode showed fast response time (<10 s) and good shelf lifetime (>2 months). The prepared magnesium sensor electrode can also be used as an indicator electrode in potentiometric titration of Mg²⁺ with EDTA with distinguished end point. The electrode revealed good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The introduced magnesium electrode was used for measurement of Mg²⁺ ion in real samples without any serious interferences from other ions.     

Brief survey on phytochemicals to prevent COVID-19

BackgroundThe recent pandemic by COVID-19 is a global threat to human health. The disease is caused by SARS-CoV-2 and the infection rate is increased more quickly than MERS and SARS as their rapid adaptation to varied climatic conditions through rapid mutations. It becomes more severe due to the lack of proper therapeutic drugs, insufficient diagnostic tool, scarcity of appropriate drug, life supporting medical facility and mostly lack of awareness. Therefore, preventive measure is one of the important strategies to control. In this context, herbal medicinal plants received a noticeable attention to treat COVID-19 in Indian subcontinent. Here, 44 Indian traditional plants have been discussed with their novel phytochemicals that prevent the novel corona virus. The basic of SARS-CoV-2, their common way of transmission including their effect on immune and nervous system have been discussed. We have analysed their mechanism of action against COVID-19 following in-silico analysis. Their probable mechanism and therapeutic approaches behind the activity of phytochemicals to stimulate immune response as well as inhibition of viral multiplication discussed rationally. Thus, mixtures of active secondary metabolites/phytochemicals are the only choice to prevent the disease in countries where vaccination will take long time due to overcrowded population density.     

Electronic structures,bonding, and spin state energetics of biomimetic mononuclear and bridged dinuclear iron complexes: a computational examination

Structural Chemistry - Mononuclear and dinuclear iron complexes are found as key intermediates in many synthetic and biocatalytic reactions, since many of these species are transient and have high...     

Synthesis of pyrano[2,3-c]pyrazoles: A review

One-pot synthesis of pyrano[2,3-c]pyrazole derivatives via two or multicomponent condensation of β-ketoesters, hydrazine monohydrate/phenyl hydrazine, malononitrile, and substituted benzaldehydes is of great interest not only in synthetic chemistry but also in medicinal chemistry because of the tremendous biological activities, such as anticancer, anti-inflammatory, analgesic, antimicrobial, and enzyme inhibitory activities exhibited by pyranopyrazoles. This review provides extensive knowledge on novel synthetic methodologies of biologically active non-spiro/spiro-pyrano[2,3-c]pyrazole derivatives published recently.