Syntheses, crystal structures, and spectral properties of a series of 3,8-Bisphenyl-1,10-phenanthroline derivatives: precursors of 3,8-Bis(4-mercaptophenyl)-1,10-phenanthroline and Its ruthenium(II) complex for preparing nanocomposite junctions with gold nanoparticles between 1 microm gap gold electrodes

A multistep synthesis was achieved to obtain 3,8-bis(4-mercaptophenyl)-1,10-phenanthroline, which has two free thiol end groups with a molecular length of 1.89 nm, and its ruthenium(II) complex. Five single-crystal structures and UV-vis spectra of related intermediates in methanol and the solid state were studied in order to obtain additional information on the molecules as well as on the supramolecular interactions in the structures. Thermal and electrochemical properties of related Ru(II) complexes were also involved. 3,8-Bis(4-mercaptophenyl)-1,10-phenanthroline and one of its ruthenium(II) complexes were then treated with gold nanoparticles (Au-NPs) via in situ thiol-to-thiol ligand exchange in the presence of two facing Au electrodes with a 1 x 1 microm(2) gap. Stable molecular junctions composed of self-assembled films were produced as revealed by an obvious increase of the conductivity between the Au electrodes, wherein dithiols-bridged Au-NPs were attached to the electrodes by means of Au-S-bonded contacts. Temperature-dependent current-voltage (I-V) measurements for the junctions were performed in the temperature range of 7-300 K, and classical Arrhenius plots and their linear fits were obtained to determine the average activation energies (DeltaE) of these devices. It is found that when the Ru(II) ion is introduced, the conductivity of the nanodevice is increased and the energy barrier is lowered under the same experimental conditions.     

LC-APCI-MS-MS method for the tissue distribution of viaminate after oral administrations to rats

Fast and sensitive liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (LC-APCI-MS) method for the specific determination of viaminate in 14 kinds of rat tissues pre-treated with simple procedure was developed and validated. Biological samples were prepared by direct precipitation to skin, stomach, intestine, and liver and extracted by liquid-liquid extraction to lung, kidney, muscle, spleen, brain, fat, testes (male and female), eye, and heart. After addition of menaquinon as internal standard to tissue homogenate, the supernatant was injected into the isocratic chromatographic system using a Waters Symmetry C8 column and methanol-water-formic acid (93:7:0.1) as the eluent. The eluate was completely led into an APCI interface with selected ion monitoring mode and the analytes were quantified using triple quadrupole MS. The assays were successfully validated in the ranges 0.02-20 ng/mL for lung, 0.02-10 ng/mL for kidney, spleen, muscle, brain, fat, eye, and heart, 0.05-10 ng/mL for testicle, 0.4-100 ng/mL for liver, skin and intestine, and 1.0-200 ng/mL for stomach. The accurate and precise studies showed good reproducibility with coefficients of variation below 8.5% and the recoveries range from 90 to 109%. The analytes were chemically stable under all relevant conditions and the assays were applied in tissue distribution study. The results showed that the viaminate concentration was high in skin, low in kidney, and almost undetectable in eye and brain.     

Highly regio- and stereoselective synthesis of indene and benzo[b]furan derivatives via a Pd-catalyzed carboannulation of propargyl carbonates with nucleophiles

A new and efficient synthesis of indene and benzo[b]furan derivatives has been achieved via Pd-catalyzed carboannulation of propargyl carbonates with nucleophiles in good to excellent yields with high regio- and stereoselectivity. A novel sequence of nucleophilic attack is observed, and a possible mechanism is proposed.     

New insight into Ni(II)-catalyzed cyclization reactions of propargylic compounds with soft nucleophiles: novel indenes formation

We have disclosed a very nice advance of nickel(II)-catalyzed carboannulation reactions. Highly substituted indene derivatives are readily prepared in moderate to excellent yields under very mild reaction conditions in air via a nickel(II)-catalyzed cyclization of propargylic compounds with soft nucleophiles.     

Limits to the sensitivity of a low noise compact atomic gravimeter

A detailed analysis of the most relevant sources of phase noise in an atomic interferometer is carried out, both theoretically and experimentally. Even a short interrogation time of 100 ms allows our cold atom gravimeter to reach an excellent short term sensitivity to acceleration of 1.4×10^-8g at 1 s. This result relies on the combination of a low phase noise laser system, efficient detection scheme and good shielding from vibrations. In particular, we describe a simple and robust technique of vibration compensation, which is based on correcting the interferometer signal by using the ac acceleration signal measured by a low noise seismometer. PACS  32.80.Pj; 42.50.Vk; 39.20.+q     

Adaptive mesh refinement method-based large eddy simulation for the flow over circular cylinder at ReD = 3900

With the development of computational power, large eddy simulation (LES) method is increasingly used in simulating complex flow. However, there still exist many factors affecting the LES quality and appropriate mesh resolution is among one of them. This work aims to develop an automatic procedure to refine the LES mesh by combining adaptive mesh refinement (AMR) and LES quality criteria. An LES refinement criterion is developed by estimating the proper grid length scale which meets the accuracy requirement of LES method. With this criterion, the baseline mesh is automatically refined with the AMR method. In this work, an efficient one-shot refinement strategy is also proposed to reduce the overall simulation time. Current AMR-based LES method is verified with the typical LES test case about the flow past circular cylinder at Re _D = 3900. Results show that the automatically refined mesh provides systematically better agreement with experimental results and with current method the balance between accuracy and computational expense for LES can be obtained.     

316L不锈钢在静态液态锂中的腐蚀行为研究

利用脉冲激光诱导击穿光谱仪(LIBS)结合SEM、EDX和维氏硬度(HV)等分析手段,分析了316L不锈钢在350℃的液态锂中静态腐蚀500h后的腐蚀特性。微观形貌分析表明：样品存在较明显的晶间腐蚀,其腐蚀层厚度约为2.7μm。硬度分析表明：腐蚀后表面硬度值约HV234.72,约是腐蚀前硬度值的0.78倍。LIBS组分分析表明：经液态锂腐蚀后的样品表面Ni、Cr等元素含量相对减少;在被腐蚀区域Li元素含量随激光击打深度的增加而减少,而Ni、Cr等元素含量与之近似呈成正比递增;母材区Li元素的渗透深度约3.5μm,约是焊缝区的0.6倍。     

Tough Double Metal-ion Cross-linked Elastomers with Temperature-adaptable Self-healing and Luminescence Properties

Smart materials with a combination of tough solid-like properties, fast self-healing and optical responsiveness are of interests for the development of new soft machines and wearable electronics. In this work, tough physically cross-linked elastomers that show high mechanical strength, intriguing temperature-adaptable self-healing and fluorochromic response properties are designed using aluminum(Al) and fluorescent europium(Eu) ions as cross-linkers. The ionic Al-COOH binding is incorporated to construct the strong polymer network which mainly contributes to the mechanical robustness of the elastomer consisting of two interpenetrated networks. The Eu-iminodiacetate(IDA) coordination is mainly used to build the weaker but more dynamic network which dominate the elasticity, self-healing and luminescence of the elastomer.Moderate Eu~(3+) and Al~(3+) contents give these supramolecular elastomers high toughness. The temperature-sensitive Eu-IDA coordination enables tunable self-healing rate and efficiency along with fast Eu-centered "ON/OFF" switchable red emission. The mechanical, self-healing and luminescence properties of these elastomers can be adjusted by tuning the ratio of the two types of metal ions. This elastomer is potentially applicable for biosensors, wearable optoelectronics and anticounterfeiting materials.     

镍/铁复合纳米微粒中与粒径相关的控制参数及磁性能分析

根据样品的TEM、EDX和VSM检测结果,分析制备纳米微粒工艺中与粒径相关的水／有机物（摩尔比R）比例对颗粒成核尺寸的影响,以及不同镍／铁比例（摩尔比）对粉末材料磁性能的影响。给出控制颗粒尺寸大小的R取值。