Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

The catalyst used in fluidized catalytic cracking (FCC) units of refineries after several recovery cycles in regeneration units, reduces its activity and it is partially substituted by new catalyst in the process. As it has a high silicon and aluminum oxides content, the pozzolanic properties of a Brazilian FCC spent residual catalyst, used in different substitution degrees to cement, were evaluated by three thermal analysis techniques during the early stages of hydration of a type II Portland cement. NCDTA curves show in real time that the residual catalyst, accelerates the stages of cement hydration. TG and DSC curves of respective pastes after 24 h of hydration evidence the pozzolanic activity of the waste, respectively, by the lower water mass loss during the dehydroxylation of the residual calcium hydroxide and by the lower dehydroxylation endothermal effect. Within the analyzed period, the higher is the cement substitution degree, the higher is the pozzolanic activity of the residual catalyst.     

Sorption behavior of Co(II) on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the presence of humic acid

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The extent of sorption of divalent metal cations is controlled by a number of factors including cosorbing or complexing. In this work, the effects of pH, humic acid HA/Co(II) addition orders, ionic strength, concentration of HA, and foreign cations on the Co(II) sorption on γ-Al₂O₃ in the presence of HA were investigated. The sorption isotherms of Co(II) on γ-Al₂O₃ in the absence and presence HA were also studied and described by using S-type sorption model. The experimental results showed that the Co(II) sorption is strongly dependent on the pH values, concentration of HA, but independent of HA/Co(II) addition orders, ionic strength, and foreign cations in the presence of HA under our experimental conditions. The results also indicated that HA enhanced the Co(II) sorption at low pH, but reduced the Co(II) sorption at high pH. It was hypothesized that the significantly positive influence of HA at low pH on the Co(II) sorption on γ-Al₂O₃ was attributed to strong surface binding of HA on γ-Al₂O₃ and subsequently the formation of ternary surface complexes such as ≡S-OOC-R-(COO⁻) _x Co^2−x . Chemi-complexation may be the main mechanism of the Co(II) sorption on γ-Al₂O₃ in the presence of HA.     

Differential conductance switching of planar tunnel junctions mediated by oxidation/reduction of functionally protected ferrocene

Planar tunnel junctions were fabricated by self-assembling 1,1'- ferrocenedicarboxylic acid (FDCA) onto native oxides of thermally deposited aluminum films and subsequently depositing a second aluminum film. Junctions were characterized using Reflection-Absorption Fourier Transform Infrared Spectroscopy (RAIRS) and current-voltage (I-V) spectroscopy. Before deposition of the second aluminum film, RAIRS of FDCA and ferrocenecarboxylic acid (FCA) films revealed COO(-), C=O, and Fc ring stretching modes, indicating that both types of molecules can interact strongly with the oxide and remain intact. After deposition, systems exhibited prominent COO(-) modes and weakened C=O modes, indicating further reaction with aluminum/aluminum oxide. Fc ring modes persisted in FDCA systems but disappeared in FCA systems, suggesting that the second COOH group in the FDCA molecule can act as a protecting group for the ferrocene moiety. Cyclic I-V measurements of FDCA tunnel junction systems revealed very strong ( approximately 10-fold) hysteretic differential conductance switching that was both reversible and stable. Control measurements using as prepared junctions, as well as junctions containing 1,6-hexanedioic acid, 1,9-nonanedioic acid, 1,4-dibenzoic acid, or FCA revealed only very weak ( approximately 10%) differential conductance changes. We attribute FDCA junction switching to barrier profile modifications induced by oxidation/reduction of the functionally protected ferrocene moieties.     

Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Borate adsorption at Pt(111) in acidic medium

The adsorption/desorption process of borate was studied at Pt(111) in acidic solution by cyclic voltammetry. A so-called butterfly wave in the cyclic voltammogram of Pt(111) in HClO₄ shifted to negative direction upon the addition of boric acid with the disappearance of its sharp spikes. The shift in potential was found to be −57 mV with a tenfold increase of boric acid concentration. This illustrates that this anomalous wave is due to borate adsorption/desorption by a one-electron transfer process. The borate adsorption/desorption wave was observed to shift by −63 mV/pH. At pH>3, the anomalous wave splits forming two separate waves, depending on the pH and the scan rate. The appearance of two waves is assigned to the change in the adsorption mode of borate or the participation of OH in the adsorption process.     

Coordination of solvent molecules to VO(acac)<Subscript>2</Subscript> complexes in solution studied by hyperfine sublevel correlation spectroscopy and pulsed electron nuclear double resonance

Interactions and binding sites of the solvent molecules chloroform and ethanol to bis(acetylacetonate)oxovanadium(IV) (VO(acac)₂) complexes in (frozen) solutions have been investigated by pulsed electron nuclear double resonance, sum peak electron spin echo envelope modulation and hyperfine sublevel correlation spectroscopy. The experimental proton hyperfine coupling data of coordinating solvent molecules have been interpreted using quantum chemical calculations (density functional theory). Experimental and computed hyperfine couplings indicate that ethanol coordinates to vanadium in the equatorial plane of VO(acac)₂ and chloroform interacts via hydrogen bonding to oxygens of the acac ligands.     

Lupane-triterpene glycosides from the leaves of Acanthopanax gracilistylus

A novel lupane-triterpene glycoside, called wujiapioside B (1), was isolated from the leaves of Acanthopanax gracilistylus (Araliaceae) together with three known lupane-triterpene glycosides, acankoreoside C (2), acantrifoside A (3) and 3-epibetulinic acid 28-O-alpha-L-rhamnopyranosyl-(1-->4)-beta-D-glucopyranosyl-(1-->6)-beta-D-glucopyranosyl ester (4). Based on spectroscopic data, the chemical structure of 1 was determined as 3alpha,23-dihydroxy-lup-20(29)-en-28-oic acid 28-O-alpha-L-rhamnopyranosyl-(1-->4)-beta-D-glucopyranosyl-(1-->6)-beta-D-glucopyranosyl ester. Compounds 2-3 were obtained for the first time from this plant and compound 4 has not been isolated from Acanthopanax genus yet.     

Predicting adsorption isotherms of low-volatile compounds by temperature programmed desorption: iodine on carbon

Equilibrium adsorption isotherms for low-volatile compounds are extremely difficult to measure. A simple technique using temperature programmed desorption (TPD) is proposed. It is demonstrated that the two parameters needed for constructing the Langmuir isotherm can be derived with data from the TPD technique alone. Thus, the Langmuir isotherms of iodine on AX-21 super-activated carbon were obtained with this technique. A series of TPD experiments for samples with different initial loadings of iodine were carried out by varying the heating rates which resulted in different peak desorption temperatures. The peak desorption temperature decreased as the initial loading was increased because of the re-adsorption effect. The Langmuir constant was derived from kinetic theory with the activation energy for desorption obtained from the experiment. The activation energy for desorption was 12.3 kcal/mol. The Langmuir constants determined by this technique were in comparable order of magnitude to the reported values for iodine on activated carbon. The saturation capacity of AX-21 for iodine could also be determined from the TPD data obtained from samples with different initial loadings. The estimated saturation capacity from the TPD experiment was 2.96 g I(2)/g AX-21, which was close to the experimentally measured saturation capacity of 3.25 g I(2)/g AX-21 for the same system.     

The characteristics of integrins expression in decidualized human endometrial stromal cell induced by 8-Br-cAMP in in vitro

Integrins are heterodimeric glycoproteins that have been found to undergo dynamic temporal and spatial changes in the endometrium during the menstrual cycle and in early pregnancy. Specificity of integrins is known to be different in human endometrial stromal cells and decidual cells. These shifts of integrins suggested to play an important role in embryo implantation and can be modulated by progesterone, cAMP derivatives, and cytokines. The mechanisms of decidualization and its precise physiological role are still not clearly understood and in vitro systems could provide an alternative that overcomes limitations of studying such complex biological phenomena in vivo at the time of implantation. This study was undertaken to establish an in vitro model system for human decidualization using 8-bromo-cAMP and to investigate the characteristics of stromal integrin expression in vitro by 8-Br-cAMP. Endometrial stromal cells were isolated and cultured, and then were induced to decidualize by 0.5 mM 8-Br-cAMP for 15 days. Immunofluorescence staining and flow cytometric analyses of the integrin subunits (alpha1, alpha4, alpha5, alpha6, beta1 and alphavbeta3) were performed at day 9. In the presence of 8-Br-cAMP, the staining intensity of alphavbeta3 was significantly higher than control and measurements for alpha1, alpha4, alpha5, alpha6, and beta1 were similar. Immunofluorescent localization of the integrins reflected the differences obtained from the flow cytometric analyses described above. In summary, the expression of alphavbeta3 integrin increased in stromal cells in vitro decidualized by 8-Br-cAMP and this up-regulation of alphavbeta3 integrin expression during decidualization might influence on human implantation.     

Orientation control of perovskite thin films on glass substrates by the application of a seed layer prepared from oxide nanosheets

Orientation control of perovskite compounds was investigated by the application of a seed layer prepared from oxide nanosheets. An aqueous suspension of oxide nanosheets was prepared by the exfoliation of a layered compound of KCa₂Nb₃O₁₀ oxide grains. A seed layer composed of (TBA)Ca₂Nb₃O₁₀ nanosheets (TBA = tetrabutylammonium) was formed on a glass substrate by simply dip coating it in the suspension. Two kinds of perovskite compounds, LaNiO₃ (LNO) and Pb(Zr,Ti)O₃ (PZT) with a preferred orientation of (00l) were successfully grown on this seeded glass substrate. In this study, the relation between lattice mismatch and electrical properties is investigated. A large, oriented PZT film with a size of 5 ×4 cm shows an improved P-E hysteresis behavior by use of this orientation control.