Correlations in the hadronization process

Pions cannot be fully described as simple $q\bar q$ systems. They have a very small mass and may appear as a kind of Goldstone particles. It is demonstrated how this is expected to give correlations in flavour andp _⊥ in the string model hadronization process. Improved agreement with experimental data is obtained, in particular for η′, η production and π⁺π^? mass correlations.     

Synthesis of [4,5-Bis(hydroxymethyl)-1,3-dioxolan-2-yl]nucleosides as Potential Inhibitors of HIV

The synthesis of 1,3-dioxolan-2-ylnucleosides and related chemistry is described. We have shown that 2-methoxy-1,3-dioxolane (6) reacts with silylated thymine and trimethylsilyl triflate to give the acyclic formate ester 1-[2-(formyloxy)ethyl]thymine (8) rather than 1-(1,3-dioxolan-2-yl)thymine (7). A tentative mechanism which could explain this result is discussed. On the other hand, 2-methoxy-1,3-dioxolane 13c reacts with silylated bases to give [4,5-bis(hydroxymethyl)-1,3-dioxolan-2-yl]nucleosides, thus representing the first examples of this novel class of compounds. The nature of the nucleobase and the hydroxyl protecting groups was found to have great influence on the reaction and on the stability of the nucleosides. Compounds 16 and 18 were found to be inactive when tested for anti HIV-1 activity in vitro.     

Pulse polarographic determination of nitrosamines: Part 2. Methods for the Determination of N-Nitrosodiphenylamine and N-Nitrosodibutylamine

Differential pulse polarographic methods are reported for the determination of N-nitrosodiphenylamine and N-nitrosodibutylamine in aqueous media. Optimum conditions for analysis were obtained with acetate buffer (pH 3.74) and 0.01 M H₂SO₄, where reduction peak separations were of the order of 300 mV and 200 mV, respectively. Detection limits were approximately 3×10^-8 M for each compound. Methods for the extraction of these nitrosamines from iso-octane to aqueous solutions were quantitatively examined.     

Pulse polarographic determinations of nitrosamines: Part I. Determination of N-nitrosodiethanolamines in grinding fluids

Differential pulse polarography is assessed as amethod for the determination od N-nitrosodiethanolamine (NDEA) in aqueous media. Optimum conditions with respect to pH and supporting electrolyte are found with simple mineral acid solutions (H₂SO₄) at pH 1–2. Detection limits in this medium are of the order 5 × 10^-5 M NDEA. the procedure is applied to the direct determination of NDEA in commercially available grinding fluids which contain, on manufacture, precursors for nitrosamine formation. High concentrations of NDEA were found (75 μM) with an estimated accuracy better than 92% and a precision of ±8%.     

Synthesis of Enantiomerically Pure Bis(hydroxymethyl)-Branched Cyclohexenyl and Cyclohexyl Purines as Potential Inhibitors of HIV

The synthesis of the enantiomerically pure bis(hydroxymethyl)-branched cyclohexenyl and cyclohexyl purines is described. Racemic trans-4,5-bis(methoxycarbonyl)cyclohexene [(+/-)-6] was reduced with lithium aluminum hydride to give the racemic diol (+/-)-7. Resolution of (+/-)-7 via a transesterification process using lipase from Pseudomonas sp. (SAM-II) gave both diols in enantiomerically pure form. The enantiomerically pure diol (S,S)-7was benzoylated and epoxidized to give the epoxide 9. Treatment of the epoxide 9 with trimethylsilyl trifluoromethanesulfonate and 1,5-diazabicyclo[5.4.0]undec-5-ene followed by dilute hydrochloric acid gave (1R,4S,5R)-4,5-bis[(benzoyloxy)methyl]-1-hydroxycyclohex-2-ene (10). Acetylation of 10 gave (1R,4S,5R)-1-acetoxy-4,5-bis[(benzoyloxy)methyl]cyclohex-2-ene (11). (1R,4S,5R)-1-Acetoxy-4,5-bis[(benzoyloxy)methyl]cyclohex-2-ene (11) was converted to the adenine derivative 12 and guanine derivative 13 via palladium(0)-catalyzed coupling with adenine and 2-amino-6-chloropurine, respectively. Hydrogenation of 12 and 13 gave the correspondning saturated adenine derivative 14 and guanine derivative 15. (1R,4S,5R)-4,5-Bis[(benzoyloxy)methyl]-1-hydroxycyclohex-2-ene (10) was converted to the adenine derivative 16 and guanine derivative 17 via coupling with 6-chloropurine and 2-amino-6-chloropurine, respectively, using a modified Mitsunobu procedure. Hydrogenation of 16 and 17 gave the corresponding saturated adenine derivative 18 and guanine derivative 19. Compounds 12-19 were evaluated for activity against human immunodeficiency virus (HIV), but were found to be inactive. Further biological testings are underway.     

Electron impact ionization tandem mass spectrometry of glycosphingolipids. Part III. Study of the fragmentation modes of selected glycosphingolipids

Results are presented from a systematic study of the high-energy tandem mass spectra (fragment ion spectra) of derivitized (permethylation followed by LiAlH₄ reduction) porcine glycosphingolipids (GSLs) using a four-sector mass spectrometer. The ions studied were the ammonium ions of the GSLs formed on loss of the sphingosine side-chain following electron impact ionization. Fragment ion spectra are shown to provide structural data useful in identifying carbohydrate sequence, the location of hexosamine residues and the identification of fatty acid chain length. Differences between the fragment ion spectra of isomers differing in carbohydrate linkage position and stereochemistry were observed, but not easily predicted.     

Synthesis of [4,5-Bis(hydroxymethyl)-1,3-oxathiolan-2-yl]nucleosides as Potential Inhibitors of HIV via Stereospecific Base-Induced Rearrangement of a 2,3-Epoxy Thioacetate(1)

The synthesis of [4,5-bis(hydroxymethyl)-1,3-oxathiolan-2-yl]nucleosides is described. 2,3-Epoxy alcohol 10 was converted in one pot into thioacetate 11. Treatment of 11 under mild alkaline conditions gave thiirane 12 with inversion of configuration at C-2. We also found that thioacetate 11 rearranges into thiirane 14 under mild acidic conditions. This rearrangement reaction was shown by independent synthesis to proceed with net retention of configuration at C-2. We have proposed a tentative mechanism which may explain the results obtained. Opening of thiiranes 12 and 14 followed by deprotection gave (2R,3R)-2-thiothreitol (23) and (2S,3R)-2-thioerythritol (25), respectively. Regioselective silylation of the primary hydroxyl groups of 23 followed by treatment with trimethyl orthoformate gave 2-methoxy-1,3-oxathiolanes 26 and 27. Condensation with silylated bases followed by deprotection and separation of the anomers gave the oxathiolanylnucleosides. Compounds 29-31, 34, and 35 were found to be inactive when tested for inhibition of HIV-1 activity in vitro.     

Combining Chemometric Models with Adsorption Isotherm Measurements to Study Omeprazole in RP-LC

The adsorption of the proton-pump inhibitor omeprazole was investigated using RP-LC with chemometric models combined with adsorption isotherm modelling to study the effect of pH and type of organic modifier (i.e., acetonitrile or methanol). The chemometric approach revealed that omeprazole was tailing with methanol and fronting with acetonitrile along with increased fronting at higher pH. The increased fronting with higher pH for acetonitrile was explored using a pH-dependent adsorption isotherm model that was determined using the inverse method and it agreed well with the experimental data. The model indicated that the peaks exhibit more fronting at high pH due to a larger fraction of charged omeprazole molecules. This model could accurately predict the shape of elution profiles at arbitrary pH levels in the studied interval. Using a two-layer adsorption isotherm model, the difference between acetonitrile and methanol was studied at the lowest pH at which almost all omeprazole molecules are neutral. Omeprazole had adsorbate–adsorbate interactions that were similar in strength for the acetonitrile and methanol mobile phases, while the solute–adsorbent interactions were almost twice as strong with methanol. The difference in the relative strengths of these two interactions likely explains the different peak asymmetries (i.e., tailing/fronting) in methanol and acetonitrile. In conclusion, thermodynamic modelling can complement chemometric modeling in HPLC method development and increase the understanding of the separation.

     

Impact of an error in the column hold-up time for correct adsorption isotherm determination in chromatography II. Can a wrong column porosity lead to a correct prediction of overloaded elution profiles?

The adsorption isotherm was determined for phenol in methanol/water on a C-8 stationary phase using frontal analysis in staircase mode, assuming different total column porosities, from 1 to 87%. Each set of adsorption isotherm data, with a certain column porosity, was fitted to various adsorption models and the generated parameters were used to calculate overloaded elution band profiles that were compared with experiments. It was found that the bi-Langmuir model had an optimum fit for a porosity that corresponds well with the value found experimentally. The adsorption energy distribution (AED) calculations and error analysis confirmed a bimodal energy distribution. It was also found that band profiles can be accurately predicted with a quite arbitrary chosen porosity, under prerequisite that a wrong but flexible adsorption model is chosen instead of the correct one. The latter result is very useful for quick optimizations of preparative separations where the exact value of the column porosity is not available.     

Controlling Josephson transport by manipulation of Andreev levels in ballistic mesoscopic junctions

We discuss how to control dc Josephson current by influencing the structure and nonequilibrium population of Andreev levels via external electrostatic gates, current injection and electromagnetic radiation. In particular we will consider the ‘giant’ Josephson critical current in ‘long’ SIS tunnel junctions and the regular and anomalous nonequilibrium Josepson currents in three terminal SNS junctions. We will briefly discuss applications to the Josephson field effect transistor (JOFET) and to the newly invented Josephson interference transistor (JOINT).