A New Synthesis of Vinylidene Bis-phosphine Sulfides

Abstract

1,1-Bis(diphenylphosphino)ethene, 1a, was originally prepared by Colquhoun and McFarlane¹ by the reaction of lithium diphenylphosphide and vinylidene chloride. Subsequently, Schmidbaur et al.,² reported further novel chemistry of 1a and its derivatives such as 1b and 1c.     

Iron(III) Chloride–Promoted Direct Conversion of Aryl/Alkyl Cyanides to Esters

Aryl/alkyl cyanides were quickly converted into the corresponding esters in the presence of iron(III) chloride in refluxing alcohols with very good yields.     

NaOH/Et3N-Promoted Stereoselective One-Pot Synthesis of α-Diazo Oxime Ethers via Diazo Transfer Reaction

For the first time, we have observed a combined effect of two bases NaOH/Et₃N to promote the diazo transfer reaction of β-oximino esters. This unusual synergistic effect has been employed to obtain α-diazo oxime ethers directly from β-keto esters by one-pot process. This method is simple and cost-effective and the reagents are readily available.     

Fabrication and characterization of an irradiation facility for large-sample geometry

An irradiation facility consisting of a modified beam port shielding plug has been designed, fabricated built and characterized for use in irradiating non-standard sample geometries. The shielding plug features a graphite moderator at the core end with a hole, or “well” drilled of sufficient diameter and depth to accommodate an eight ounce (227 gram) sample bottle. Added shielding behind the graphite consists of castable neutron- and -gamma-ray shielding. The modified shielding plug can be removed relatively quickly from its irradiation position to minimize personnel exposures. It is mounted in close proximity to the Ohio State University Research Reactor reactor core to allow performance of high-sensitivity neutron activation analysis studies. Using the SAND-II unfolding code, the energy-dependent neutron flux has been measured in the sample irradiation position. When operating at 100 % power, the total flux is 3.9 × 10¹² n/cm²/s. Of this, 55 % is thermal (<0.5 eV), 23 % is epithermal (>0.5 eV, <0.5 MeV), and 22 % is “fast” (>0.5 MeV). This makes the facility suitable for neutron activation studies. Recently it has been used for irradiation of filter papers collected in a study of particulate air pollution in the form of atmospheric particulate matter in an urban environment.     

A new rotating-disk sorptive extraction mode,with a copolymer of divinylbenzene and N-vinylpyrrolidone trapped in the cavity of the disk,used for determination of florfenicol residues in porcine plasma

A novel extraction approach was developed based on rotating-disk sorptive extraction (RDSE). In this approach the rotating-disk extraction device consists of a Teflon disk, with a cavity that is loaded with a commercial sorbent phase selected according to the polarity of the analyte. To avoid leakage of the sorbent, the cavity is covered with a fiberglass filter and sealed with a Teflon ring. The proposed novel analytical RDSE technique was used in this study to determine florfenicol levels in plasma as a model analyte, or sample system, to describe the pharmacokinetics of a veterinary formulation. The sorbent used for this application was the copolymer of divinylbenzene and N-vinylpyrrolidone (Oasis HLB), which was selected because the florfenicol molecule contains both hydrophilic and lipophilic moieties. After the extraction, final determination of the analyte was performed by HPLC–DAD. Calibration plots and other analytical features were obtained after 90 min of extraction. The calibration plot was linear over the interval 0.4–16 μg mL^?1 (n?=?6), with R ²?=?0.9999. Recovery and repeatability were determined using a blank plasma sample spiked with 4.8 μg mL^?1 florfenicol. A recovery of 91.5 %, with a relative standard deviation (RSD) of 8.8 %, was obtained when the extraction was evaluated using six different rotating-disk devices. Precision was also assessed, using the same disk (containing the same sorbent phase) for eight aliquots of the same sample. The RSD under these conditions was 10.2 %, clearly indicating that the sorptive phase could possibly be re-used. Accordingly, RDSE is a suitable sample preparation alternative to liquid–liquid extraction (LLE), solid-phase extraction (SPE), and stir-bar sorptive extraction (SBSE).     

Near-Enantiopure Trimerization of 9-Ethynylphenanthrene on a Chiral Metal Surface

Enantioselectivity in heterogeneous catalysis strongly depends on the chirality transfer between catalyst surface and all reactants, intermediates, and the product along the reaction pathway. Herein we report the first enantioselective on-surface synthesis of molecular structures from an initial racemic mixture and without the need of enantiopure modifier molecules. The reaction consists of a trimerization via an unidentified bonding motif of prochiral 9-ethynylphenanthrene (9-EP) upon annealing to 500 K on the chiral Pd₃-terminated PdGa{111} surfaces into essentially enantiopure, homochiral 9-EP propellers. The observed behavior strongly contrasts the reaction of 9-EP on the chiral Pd₁-terminated PdGa{111} surfaces, where 9-EP monomers that are in nearly enantiopure configuration, dimerize without enantiomeric excess. Our findings demonstrate strong chiral recognition and a significant ensemble effect in the PdGa system, hence highlighting the huge potential of chiral intermetallic compounds for enantioselective synthesis and underlining the importance to control the catalytically active sites at the atomic level.     

Structural and energetic properties of RMX3-NH3 complexes

We have explored the structural and energetic properties of a series of RMX₃-NH₃ (M=Si, Ge; X=F, Cl; R=CH₃, C₆H₅) complexes using density functional theory and low-temperature infrared spectroscopy. In the minimum-energy structures, the NH₃ binds axially to the metal, opposite a halogen, while the organic group resides in an equatorial site. Remarkably, the primary mode of interaction in several of these systems seems to be hydrogen bonding (C-H--N) rather than a tetrel (N→M) interaction. This is particularly clear for the RMCl₃-NH₃ complexes, and analyses of the charge distributions of the acid fragment corroborate this assessment. We also identified a set of metastable geometries in which the ammonia binds opposite the organic substituent in an axial orientation. Acid fragment charge analyses also provide a clear rationale as to why these configurations are less stable than the minimum-energy structures. Matrix-isolation infrared spectra provide clear evidence for the occurrence of the minimum-energy form of CH₃SiCl₃–NH₃, but analogous results for CH₃GeCl₃–NH₃ are less conclusive. Computational scans of the M-N distance potentials for CH₃SiCl₃–NH₃ and CH₃GeCl₃–NH₃, both in the gas phase and bulk dielectric media, reveal a great deal of anharmonicity and a propensity for condensed-phase structural change.     

Synthesis,Characterization, and Antiproliferative Activity of Novel Chiral [QuinoxP*AuCl2]+ Complexes

Herein is reported the synthesis of two Au(III) complexes bearing the (R,R)-(–)-2,3-Bis(tert-butylmethylphosphino)quinoxaline (R,R-QuinoxP*) or (S,S)-(+)-2,3-Bis(tert-butylmethylphosphino)quinoxaline (S,S-QuinoxP*) ligands. By reacting two stoichiometric equivalents of HAuCl₄.3H₂O to one equivalent of the corresponding QuinoxP* ligand, (R,R)-(–)-2,3-Bis(tert-butylmethylphosphino)quinoxalinedichlorogold(III) tetrachloroaurates(III) (1) and (S,S)-(+)-2,3-Bis(tert-butylmethylphosphino)quinoxalinedichlorogold(III) tetrachloroaurates(III) (2) were formed, respectively, in moderate yields. The structure of (S,S)-(+)-2,3-Bis(tert-butylmethylphosphino)quinoxalinedichlorogold(III) tetrachloroaurates(III) (2) was further confirmed by X-ray crystallography. The antiproliferative activities of the two compounds were evaluated in a panel of cell lines and exhibited promising results comparable to auranofin and cisplatin with IC₅₀ values between 1.08 and 4.83 µM. It is noteworthy that in comparison to other platinum and ruthenium enantiomeric complexes, the two enantiomers (1 and 2) do not exhibit different cytotoxic effects. The compounds exhibited stability in biologically relevant media over 48 h as well as inert reactivity to excess glutathione at 37 °C. These results demonstrate that the Au(III) atom, stabilized by the QuinoxP* ligand, can provide exciting compounds for novel anticancer drugs. These complexes provide a new scaffold to further develop a robust and diverse library of chiral phosphorus Au(III) complexes.     

Chain elastic modulus of polyethylene: A spectroscopically determined force field (SDFF) study

Our SDFF for linear saturated hydrocarbon chains has been used to calculate the chain modulus of isolated and crystalline chains of n-alkanes of varying lengths. This has been done for static deformations and for the dynamic deformation in the longitudinal acoustic mode (LAM). Extrapolation to infinite chain length gives a common value of the room-temperature crystal modulus of 303 GPa (also obtained in an infinite chain calculation). Experimental Raman LAM measurements, corrected for chain-end interactions, give a modulus of 305 GPa, in excellent agreement. Problems with the experimental values obtained by inelastic neutron scattering and x-ray diffraction are discussed. © 1996 John Wiley & Sons, Inc.