Titania nanoparticles synthesis in mesoporous molecular sieve MCM-41

Nanocrystalline titanium oxide (TiO(2)) is one of the most useful oxide material, because of its widespread applications in photocatalysis, solar energy conversion, sensors and optoelectronics. The control of particle size and monodispersity of TiO(2) nanoparticles is a challenging task. The use of MCM-41, an inorganic template of uniform pore size (2-10 nm), can overcome this difficulty and produce stable nanoparticles of uniform size and shape. Here, we demonstrate the synthesis of titania nanoparticles inside the pores of silica based MCM-41 forming a TiO(2)/Si-MCM composite. Composites are formed in the alcoholic medium by incipient wetness impregnation method. Titania particles of average 3 nm size are obtained. Effect of silica and titania precursors on the quality of nanoparticles has been investigated. The characterization of titania-MCM-41 composites has been carried out using a variety of techniques like UV-vis absorption spectroscopy, X-ray diffraction, FT-IR spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and photoluminescence spectroscopy. It has been found that the titania particles are co-ordinated with Si-MCM by SiOTi covalent bond.     

Specific assay for homoserine and its lactone in Pisum sativum. Preparation of homoserine hydroxamic acid

The existence of homoserine lactone in Pisum sativum seedlings is demonstrated. L-Homoserine lactone reacts with hydroxylamine, at neutral or alkaline pH, to form homoserine hydroxamic acid. Procedures are described for preparing L-homoserine lactone and L-homoserine hydroxamic acid. The hydroxamic acid yields a color with maximum absorbance at 492 nm with Fe³⁺ in 0.25 N HCl. This reaction permitted assay for total homoserine and homoserine lactone. Six-day old Pisum sativum seedlings, with cotyledons removed, were extracted with 90% ethanol. Evaporation of the ethanol and addition of Na₂SO₄ solution and toluene and centrifugation removed protein lipids and esters. After clarification with activated charcoal, homoserine lactone content was estimated by reaction with NH₂OH and Fe³⁺ reagents. For total homoserine, protein precipitation was with 2 N HCl and toluene. Evaporation to dryness at 60 °C under vacuum converted all homoserine to the lactone. The values found for total homoserine (μmols/g, wet weight) and preformed lactone (%) with the various growth media used were as follows: nitrate 87.4 (14.7%), NH₂OH 75.2 (6.3%), water 70.5 (7.9%), urea 56.4 (18.9%). Acetic anhydride added to homoserine hydroxamic acid forms acetohydroxamic acid, which yields a color with maximum absorbance at 505 nm with Fe³⁺. This color reaction is seven times as sensitive as the reaction of Fe³⁺ with homoserine hydroxamic acid itself.     

Surfactant control of gas uptake: effect of butanol films on HCl and HBr entry into supercooled sulfuric acid

The entry of HCl into 60-68 wt % D(2)SO(4) and HBr into 68 wt % acid containing 0-0.18 M 1-butanol was monitored by measuring the fractions of impinging HCl and HBr molecules that desorb as DCl and DBr after undergoing H --> D exchange within the deuterated acid. The addition of 0.18 M butanol to the acid creates butyl films that reach approximately 80% surface coverage at 213 K. Surprisingly, this butyl film does not impede exchange but instead enhances it: the HCl --> DCl exchange fractions increase from 0.52 to 0.74 for 60 wt % D(2)SO(4) and from 0.14 to 0.27 for 68 wt % D(2)SO(4). HBr --> DBr exchange increases even more sharply, rising from 0.22 to 0.65 for 68 wt % D(2)SO(4). We demonstrate that this enhanced exchange corresponds to enhanced uptake into the butyl-coated acid for HBr and infer this equivalence for HCl. In contrast, the entry probability of the basic molecule CF(3)CH(2)OH exceeds 0.85 at all acid concentrations and is only slightly diminished by the butyl film. The OD groups of surface butanol molecules may assist entry by providing extra interfacial protonation sites for HCl and HBr dissociation. The experiments suggest that short-chain surfactants in sulfuric acid aerosols do not hinder heterogeneous reactions of HCl or HBr with other solute species.     

Fluorenyl dendrimer porphyrins: synthesis and photophysical properties

New symmetrical dendrimeric type super-porphyrin bearing sixteen fluorenyl donor groups sixteen fluorenylporphyrin SOFP (1) have been synthesized and characterized. Preliminary photophysical properties are reported; in comparison to the references first generation dendrimer tetrafluorenylporphyrin TOFP (2) bearing four peripheral fluorenyl and second generation dendrimer octafluorenylporphyrin OOFP (3) bearing eight peripheral fluorenyl, the luminescence properties are slightly improved. It is found that the excitation energy transfer occurs from the sixteen fluorenyl units to the porphyrin core, following what the porphyrin emits intense red light.     

Diastereocontrolled addition of organometallic reagents to S-chiral N-(tert-butanesulfinyl)-α-fluoroenimines

Grignard and organolithium reagents efficiently react with (S)-N-(tert-butanesulfinyl)-α-fluoroenimines to provide chiral allylamines in excellent yields and with diastereomeric ratios of up to 96:4. Acidic removal of the sulfinyl group and simple functional group transformations allow to get enantiopure fluoroolefin dipeptide mimics.     

Kinetics and mechanism for the phase transfer catalyzed cycloaddition of dichlorocarbene to cis-1,4-polybutadiene

The kinetics for the cycloaddition of dichlorocarbene to cis-1,4-polybutadiene (BR) have been examined for aqueous and solid sodium hydroxide–chloroform mixtures containing 350 molecular weight α-methyl-ω-hydroxy-poly(oxy-1,2-ethanediyl) (Carbowax 350) as a phase transfer catalyst. This study describes the influence of reaction variables on rate and the partitioning of dichlorocarbene between dichlorocyclopropanation and hydrolysis. The results are consistent with a kinetic model derived for the case where mass transfer is not rate limiting. However, this does not apply at high conversions where mass transfer control occurs due to large increases in viscosity. Higher BR concentrations can be achieved by replacing chloroform with methylene chloride containing stoichiometric amounts of chloroform. This mass action effect causes more favorable partitioning toward cyclopropanation; otherwise, chloroform and methylene chloride behave similarly as solvents. Water is an essential component in this reaction because it greatly increases the ability of the catalyst to extract sodium hydroxide into the organic phase.     

Fragmentation methods on the balance: unambiguous top–down mass spectrometric characterization of oxaliplatin–ubiquitin binding sites

The interaction between oxaliplatin and the model protein ubiquitin (Ub) was investigated in a top–down approach by means of high-resolution electrospray ionization mass spectrometry (ESI-MS) using diverse tandem mass spectrometric (MS/MS) techniques, including collision-induced dissociation (CID), higher-energy C-trap dissociation (HCD), and electron transfer dissociation (ETD). To the best of our knowledge, this is the first time that metallodrug–protein adducts were analyzed for the metal-binding site by ETD-MS/MS, which outperformed both CID and HCD in terms of number of identified metallated peptide fragments in the mass spectra and the localization of the binding sites. Only ETD allowed the simultaneous and exact determination of Met1 and His68 residues as binding partners for oxaliplatin. CID-MS/MS experiments were carried out on orbitrap and ion cyclotron resonance (ICR)-FT mass spectrometers and both instruments yielded similar results with respect to number of metallated fragments and the localization of the binding sites. A comparison of the protein secondary structure with the intensities of peptide fragments generated by collisional activation of the [Ub + Pt-(chxn)] adduct [chxn = (1R,2R)-cyclohexanediamine] revealed a correlation with cleavages in solution phase random coil areas, indicating that the N-terminal β-hairpin and α-helix structures are retained in the gas phase.     

Pathogen detection using engineered bacteriophages

Bacteriophages, or phages, are bacterial viruses that can infect a broad or narrow range of host organisms. Knowing the host range of a phage allows it to be exploited in targeting various pathogens. Applying phages for the identification of microorganisms related to food and waterborne pathogens and pathogens of clinical significance to humans and animals has a long history, and there has to some extent been a recent revival in these applications as phages have become more extensively integrated into novel detection, identification, and monitoring technologies. Biotechnological and genetic engineering strategies applied to phages are responsible for some of these new methods, but even natural unmodified phages are widely applicable when paired with appropriate innovative detector platforms. This review highlights the use of phages as pathogen detector interfaces to provide the reader with an up-to-date inventory of phage-based biodetection strategies.     

Mixed-sequence pyrrolidine-amide oligonucleotide mimics: Boc(Z) synthesis and DNA/RNA binding properties

Pyrrolidine-amide oligonucleotide mimics (POMs) exhibit promising properties for potential applications, including in vivo DNA and RNA targeting, diagnostics and bioanalysis. Before POMs can be evaluated in these applications it is first necessary to synthesise and establish the properties of fully modified oligomers, with biologically relevant mixed sequences. Accordingly, Boc-Z-protected thyminyl, adeninyl and cytosinyl POM monomers were prepared and used in the first successful solid phase synthesis of a mixed sequence POM, Lys-TCACAACTT-NH2. UV thermal denaturation studies revealed that the POM oligomer is capable of hybridising with sequence selectivity to both complementary parallel and antiparallel RNA and DNA strands. Whilst the duplex melting temperatures (Tm) were higher than the corresponding duplexes formed with isosequential PNA, DNA and RNA oligomers the rates of association/dissociation of the mixed sequence POM with DNA/RNA targets were noticeably slower.     

Effect of exposure dose on the replication fidelity and profile of very high aspect ratio microchannels in SU-8

We are interested in using SU-8 dense gratings with very high aspect ratio microchannels as the master mold for fabrication of child molds needed for replication. For such applications, the sidewall taper angle and mask replication fidelity of SU-8 are very important. Increasing the exposure time was experimentally observed to decrease the width of the microchannel and the sidewall angle of SU-8 bars. A new diffraction-refraction-reflection model was also developed. The calculated microchannel width and sidewall angle at high exposure dose agreed well with the experimentally observed values indicating that reflection at the silicon substrate was significant. The larger than calculated actual microchannel width for low exposure dose was shown to be due to leaching of unreacted SU-8 in the developer. Dense gratings of high aspect ratio SU-8 bars separated by high aspect ratio (19.1) microchannels were also demonstrated.