Existence results for a degenerated nonlinear elliptic partial differential equation

The aim of this paper is to establish the existence of weak solutions to a steady state two-dimensional irrotational compressible flow around a thin profile. This flow is described by the small disturbance equations. If the speed of sound exceeds the fluid one, the governing equations remain elliptic. But when the fluid speed is beyond the sound one, the flow becomes locally hyperbolic and shock waves arise. For a modified elliptic model, using convexity arguments, we prove the existence of a solution which is the solution to the first model when the flow remains subsonic.     

The behavior of poly(amino acids) containing l‐cysteine and their block copolymers with poly(ethylene glycol) on gold surfaces

Poly(ethylene glycol) (PEG) is often used to biocompatibilize surfaces of implantable biomedical devices. Here, block copolymers consisting of PEG and l ‐cysteine‐containing poly(amino acid)s (PAA's) were synthesized as polymeric multianchor systems for the covalent attachment to gold surfaces or surfaces decorated with gold nanoparticles. Amino‐terminated PEG was used as macroinitiator in the ring‐opening polymerization, (ROP), of respective amino acid N‐carboxyanhydrides (NCA's) of l ‐cysteine (l ‐Cys), l ‐glutamate (l ‐Glu), and l ‐lysine (l ‐Lys). The resulting block copolymers formed either diblock copolymers, PEG‐b‐p(l ‐Glu_x‐co‐l ‐Cys_y) or triblock copolymers, PEG‐b‐p(l ‐Glu)_x‐b‐p(l ‐Cys)_y. The monomer feed ratio matches the actual copolymer composition, which, together with high yields and a low polydispersity, indicates that the NCA ROP follows a living mechanism. The l ‐Cys repeat units act as anchors to the gold surface or the gold nanoparticles and the l ‐Glu repeat units act as spacers for the reactive l ‐Cys units. Surface analysis by atomic force microscopy revealed that all block copolymers formed homogenous and pin‐hole free surface coatings and the phase separation of mutually immiscible PEG and PAA blocks was observed. A different concept for the biocompatibilization of surfaces was followed when thiol‐terminated p(l ‐Lys) homopolymer was first grafted to the surface and then covalently decorated with HOOC‐CH₂‐PEG‐b‐p(Bz‐l ‐Glu) polymeric micelles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 248–257     

Synthesis of Cholesterol-Conjugated Magnetic Nanoparticles for Purification of Human Paraoxonase 1

Human serum paraoxonase 1 (PON1) is known as an antioxidant and is also involved in the detoxification of many compounds. In this study, a novel purification strategy was employed to purify the PON1 by using cholesterol-conjugated magnetic nanoparticles. Magnetic nanoparticles were synthesized and conjugated with cholesterol through diazotized p-aminohippuric acid. In Fourier transform infrared spectrum of cholesterol-p-aminohippuric acid-Fe₃O₄ nanoparticles, the appearance of peaks at 3,358.3, 1,645 cm⁻¹, and at 2,334.9 cm⁻¹ confirmed the conjugation. The molecular weight of purified PON1 was nearly 45 kDa on sodium dodecyl sulfate (SDS)–polyacrylamide gel electrophoresis (PAGE), and isoelectric point was 5.3. The specific activity was 438 U mg⁻¹ protein, and the purification fold was 515 with 73% yield. The K _m values were 1.3 and 0.74 mM with paraoxon and phenyl acetate, respectively. Western blot of 2D-PAGE confirmed the homogeneity and stability of the enzyme. Mg⁺², Mn⁺², glycerol, (NH₄)₂SO₄, PEG 6000, Triton X-100, and phenylmethylsulfonyl fluoride did not show any effect on activity. Pb⁺², Co⁺², Zn²⁺, ethanol, β-mercaptoethanol, and acetone reduced the activity while Ni²⁺, Cd²⁺, Cu²⁺, iodoacetic acid, SDS, dimethylformamide, DMSO inhibited the activity. In vitro enzyme activity was slightly reduced by acetyl salicylic and acetaminophen and reduced 50% with amino glycosides and ampicillin antibiotics at concentrations of 0.6 and 30 mg ml⁻¹, respectively. This is the first report for the synthesis of cholesterol-conjugated magnetic nanoparticles for simple purification of PON1 enzyme.     

DC Electrical Conductivity of Some Oligoazomethines Doped with Nanotubes

Three aromatic oligoazomethines containing seven benzene rings each were synthesized. The terminal rings were substituted with different organic groups; namely, OH, H, and NO₂. Synthesis was carried out according to the literature by condensing the para-substituted benzaldehydes with benzidine to give the three rings compound, which is then condensed with terephthaldehyde to give the respective seven benzene rings oligomer. The oligomers were used to investigate the effects of molecular structure on the electronic structure, as well as electronic and electrical properties. DC electrical conductivity variation of oligoazomethines is studied in the temperature range 300–500 K after annealing for 24 h at 100°C and after doping with 25 and 50 wt% Multi Wall Nanotubes (MWNTs). An attempt is made to relate DC electrical conductivity and electronic properties to chain length, substituted groups and coplanarity. The different groups attached to the ends showed a small effect on conductivity of the different oligomers in the following order: electron donating > neutral > electron withdrawing groups. Oligoazomethines-MWNTs gave a value of (10^?4 Scm^?1) as the highest electrical conductivity at higher temperatures. DC electrical conductivity was interpreted using the band energy model. The narrow-gap activation energies noted suggest its application in formulation of photovoltaic panels.     

Flotation-separation of aluminum from some water samples using powdered marble waste and oleic acid.

Bench-scale experiments were conducted in the laboratory, aiming to remove aluminum from water. They were based on the use of powdered marble wastes (PMW), which are inexpensive and produced in large quantity, and thus potentially cause environmental problems, as an effective inorganic sorbent and oleic acid (HOL) as surfactant. The main parameters (solution pHs, sorbent, surfactant and aluminum concentrations, shaking time, ionic strength and the presence of foreign ions) that influence the sorptive-flotation process were examined. Good results were obtained under the optimum conditions, for which nearly 100% of aluminum at pH 7 and at room temperature (approximately 25 degrees C) was removed. The procedure was successfully applied to the recovery of aluminum spiked to some natural water samples. Moreover, a sorption and flotation mechanism is suggested.     

Carbon black and propylene oxidation over Ru/CoxMgyAl2Oz catalysts

The effects of Co_xMg_yAl₂O_z mixed oxides composition and ruthenium addition on the oxidation of propylene and carbon black (CB) were investigated. Different reactive cobalt and ruthenium oxide species were formed following calcination at 600 °C. The addition of ruthenium was beneficial for the CB oxidation under “loose contact” conditions and for propylene oxidation when the cobalt content was intermediate to low. The calculated activation energy for CB oxidation was decreased from 151 kJ mol⁻¹ for the uncatalyzed reaction to 111 kJ mol⁻¹ over the best catalyst.     

A Novel Method of Magnetic Nanoparticles Functionalized with Anti-Folate Receptor Antibody and Methotrexate for Antibody Mediated Targeted Drug Delivery

Therapeutic effects of anticancer medicines can be improved by targeting the specific receptors on cancer cells. Folate receptor (FR) targeting with antibody (Ab) is an effective tool to deliver anticancer drugs to the cancer cell. In this research project, a novel formulation of targeting drug delivery was designed, and its anticancer effects were analyzed. Folic acid-conjugated magnetic nanoparticles (MNPs) were used for the purification of folate receptors through a novel magnetic affinity purification method. Antibodies against the folate receptors and methotrexate (MTX) were developed and characterized with enzyme-linked immunosorbent assay and Western blot. Targeting nanomedicines (MNP-MTX-FR Ab) were synthesized by engineering the MNP with methotrexate and anti-folate receptor antibody (anti-FR Ab). The cytotoxicity of nanomedicines on HeLa cells was analyzed by calculating the % age cell viability. A fluorescent study was performed with HeLa cells and tumor tissue sections to analyze the binding efficacy and intracellular tracking of synthesized nanomedicines. MNP-MTX-FR Ab demonstrated good cytotoxicity along all the nanocomposites, which confirms that the antibody-coated medicine possesses the potential affinity to destroy cancer cells in the targeted drug delivery process. Immunohistochemical approaches and fluorescent study further confirmed their uptake by FRs on the tumor cells’ surface in antibody-mediated endocytosis. The current approach is a useful addition to targeted drug delivery for better management of cancer therapy along with immunotherapy in the future.     

The Development of a Green Innovative Bioactive Film for Industrial Application as a New Emerging Technology to Protect the Quality of Fruits

Today, the most significant challenge encountered by food manufacturers is degradation in the food quality during storage, which is countered by expensive packing, which causes enormous monetary and environmental costs. Edible packaging is a potential alternative for protecting food quality and improving shelf life by delaying microbial growth and providing moisture and gas barrier properties. For the first time, the current article reports the preparation of the new films from Ditriterpenoids and Secomeliacins isolated from Melia azedarach (Dharek) Azadirachta indica plants to protect the quality of fruits. After evaluating these films, their mechanical, specific respirational, coating crystal elongation, elastic, water vapor transmission rate (WVTR), film thickness, and nanoindentation test properties are applied to apple fruit for several storage periods: 0, 3, 6, 9 days. The fruits were evaluated for postharvest quality by screening several essential phytochemical, physiological responses under film coating and storage conditions. It was observed that prepared films were highly active during storage periods. Coated fruits showed improved quality due to the protection of the film, which lowered the transmission rate and enhanced the diffusion rate, followed by an increase in the shelf life. The coating crystals were higher in Film-5 and lower activity in untreated films. It was observed that the application of films through dipping was a simple technique at a laboratory scale, whereas extrusion and spraying were preferred on a commercial scale. The phytochemicals screening of treated fruits during the storage period showed that a maximum of eight important bioactive compounds were present in fruits after the treatment of films. It was resolved that new active films (1–5) were helpful in the effective maintenance of fruit quality and all essential compounds during storage periods. It was concluded that these films could be helpful for fruits growers and the processing industry to maintain fruit quality during the storage period as a new emerging technology.