Bioanalytical method development,validation and quantification of dorsomorphin in rat plasma by LC‐MS/MS

The present investigation describes the development and validation of a sensitive liquid chromatography–mass spectrometry/mass spectrometry (LC‐MS/MS) method for the estimation of dorsomorphin in rat plasma. A sensitive LC‐MS/MS method was developed using multiple reaction monitoring mode, with the transition of m/z (Q1/Q3) 400.2/289.3 for dorsomorphin and m/z (Q1/Q3) 306.2/236.3 for zaleplon. Chromatographic separation was achieved on a reverse phase Agilent XDB C₁₈ column (100 × 4.6 mm, 5 µm). The mobile phase consisted of acetonitrile and 5 mm ammonium acetate buffer (pH 6.0) 90:10 v/v, at a flow rate of 0.8 mL/min. The effluence was ionized in positive ion mode by electrospray ionization (ESI) and quantitated by mass spectrometry. The retention times of dorsomorphin and internal standard were found to be 2.13 and 1.13 min, respectively. Mean extraction recovery of dorsomorphin and internal standard in rat plasma was above 80%. Dorsomorphin calibration curve in rat plasma was linear (r² ≥ 0.99) ranging from 0.005 to 10 µg/mL. Inter‐day and intra‐day precision and accuracy were found to be within 85–115% (coefficient of variation). This method was successfully applied for evaluation of the oral pharmacokinetic profile of dorsomorphin in male Wistar rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Enantioselective LC‐ESI‐MS/MS determination of dropropizine enantiomers in rat plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective and reliable LC–ESI‐MS/MS method for direct quantitation of dropropizine enantiomers namely levodropropizine (LDP) and dextrodropropizine (DDP) in rat plasma without the need for derivatization as per regulatory guidelines. Dropropizine enantiomers and carbamazepine (internal standard) were extracted from 50 μL rat plasma using ethyl acetate. LDP and DDP resolved with good baseline separation (R_s = 4.45) on a Chiralpak IG‐3 column. The mobile phase consisted of methanol with 0.05% diethylamine pumped at a flow rate of 0.5 mL/min. Detection and quantitation were done in multiple reaction monitoring mode following the transitions m/z 237 → 160 and 237 → 194 for dropropizine enantiomers and the internal standard, respectively, in the positive ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 3.23–2022 ng/mL for each enantiomer. The intra‐ and inter‐day precisions were in the ranges of 3.38–13.6 and 5.11–13.8 for LDP and 4.19–11.8 and 8.89–10.1 for DDP. Both LDP and DDP were found to be stable under different stability conditions. The method was successfully used in a stereoselective pharmacokinetic study of dropropizine enantiomers in rats following oral administration of racemate dropropizine at 100 mg/kg. The pharmacokinetic results indicate that the disposition of dropropizine enantiomers is not stereoselective and chiral inversion does not occur in rats.     

Pyrene-Hydrazone-π···Hole Coupled Turn-on Fluorescent and Naked- Eye Colorimetric Sensor for Cyanide: Role of Homogeneous π-Hole Dispersion in Anion Selectivity

A pyrene based probe associated with π···hole – hydrazone as one of the recognizing elements is synthesized and its turn in to a selective colorimetric and turn-on fluorescent sensor, (L³) for cyanide anion. This chemo sensor show high selectivity towards cyanide anion through photo electron transfer (PET) mechanism. The binding strength and sensitivity of the chemo sensor L³ towards cyanide are found to be 2.0 X 10⁴, and 4.44 x 10^-4 respectively. We have compared this high selectivity of the receptor towards cyanide, with our previously reported receptors L¹ and L². The detailed UV-Vis, Emission, ¹H-NMR, IR spectroscopic and Molecular Electrostatic Potential (MEP) studies reveals that the homogeneous π···hole dispersion in the aromatic ring governing the selectivity of the receptor towards cyanide anion. Such a positive π···hole homogeneous dispersion is missing in the case of sensor L², instead we have polarized π···hole dispersion towards 2^nd and 4^th position of di-nitrophenyl chromophoric unit in L².

Graphical Abstract

     

Thermal,mechanical, and topographical evaluation of nonstoichiometric α-cyclodextrin/poly(ε-caprolactone) pseudorotaxane nucleated poly(ε-caprolactone) composite films

Three pseudorotaxanes (PpR) comprised of poly (ε-caprolactone) (PCL) and α-cyclodextrin (α-CD) with varying stoichiometric ratios were synthesized and characterized. Wide-angle X-ray diffraction (WAXD) and thermogravimetric (TGA) analyses provided conclusive evidence for complexation between the guest PCL and host α-CD. The as-synthesized and characterized PpRs were used at 10 and 20% concentrations as nucleants to promote the bulk PCL crystallization in composite films. Both WAXD and TGA provided evidence for intact PpR structures in the composite films. Isothermal differential scanning calorimetric (I-DSC) analyses, performed at various crystallization temperatures demonstrated significant differences in the crystallization patterns among the composite films. In addition, I-DSC analyses showed higher Avrami constant values (n) in the PpR-nucleated composite PCL films (n ~ 3), indicating 3-dimensional crystal growth. In the case of neat PCL films, however, lower n values indicated crystal growth in 1-dimensions or 2-dimensions. Moreover, atomic force microscopic analyses showed large crests and pits in PpR-nucleated PCL composites, with irregular morphologies leading to higher surface roughness. To the contrary, the crests and pits were much smaller in the neat PCL films, resulting in lower surface roughness values. Finally, mechanical testing revealed higher tensile strength for PpR-nucleated PCL composites films, demonstrating larger load bearing capabilities. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1529–1537     

Vanadium dodecylamino phosphate: A novel efficient catalyst for synthesis of polyhydroquinolines

A novel vanadium dodecylamino phosphate was synthesised by an instant reaction between phosphoric acid and vanadyl acetylacetonoate using dodecylamine as the structure-directing agent at ambient temperature. The physicochemical characteristics of the material were investigated by a variety of analytical techniques. XRD studies revealed the presence of vanadium phosphate and hydrated vanadium phosphate phases in the framework of the material. The catalytic application of this material toward in the synthesis of polyhydroquinolines via Hantzsch condensation was investigated at ambient temperature. This method affords high yields within short reaction times. The influence of various reaction parameters such as different solvents, catalyst dosage, effect of aldehydes, and reusability was studied and a plausible mechanism proposed.     

Novel preparation method of nanosilver doped sol gel TiO2 photocatalysts for dye pollutant degradation

In the present study, a novel method for the silver nanoparticle incorporation into TiO₂ sol is reported which provides efficient dispersion of inserted metal in the calcined gel. Glucose mediated metal nanoparticle synthesis eliminates the additional steps for the introduction of dopant over the support. Ag nanoparticle acts as competent trapping centers preventing the recombination of electron?Chole pairs. Thus, in spite of the low UV intensity present in the sunlight, considerable enhancement in the catalytic efficiency was observed for the degradation of dye pollutants over nanosilver loaded TiO₂. Transmission electron microscopic images display the well isolated nanoparticles of silver having uniform dimensions of less than 5?nm over the best system, 2?wt% nanosilver loaded TiO₂, which is accountable for its effectiveness as a photocatalyst. Anatase is found to be the photocatalytic active phase, as evident from the X-ray diffraction studies.     

An Efficient Process for the Synthesis of Renin Inhibitor,ABT-517

An efficient process for the preparation of renin inhibitor, ABT-517 is described. The process avoids solvent extractions or chromatographic purifications and is used on multi-kilogram scale.     

Diamond kinoform hard X‐ray refractive lenses: design,nanofabrication and testing

Motivated by the anticipated advantageous performance of diamond kinoform refractive lenses for synchrotron X‐ray radiation studies, this report focuses on progress in designing, nanofabricating and testing of their focusing performance. The method involves using lift‐off and plasma etching to reproduce a planar definition of numerically determined kinoform refractive optics. Tests of the focusing action of a diamond kinoform refractive lens at the APS 8‐ID‐I beamline demonstrate angular control of the focal spot.     

Nonenzymatic glucose sensing at ruthenium dioxide–poly(vinyl chloride)–Nafion composite electrode

Development of nonenzymatic glucose sensors with high reproducibility and stability is an urgent need to reduce cost of regular diabetic monitoring. Here, we have fabricated ruthenium dioxide–poly(vinyl chloride)–Nafion (RuO₂–PVC–Nafion) composite for direct glucose sensing in sodium hydroxide and phosphate buffer nonenzymatically for the first time. The restricted activity of the RuO₂–PVC film electrode in alkaline pH is extended to neutral pH using Nafion as an outer membrane, which reduces the distance between Ru active sites by bridging effect and improves the electrode stability. The catalytic rate, measured in terms of change of RuO₂ resistance, is similar irrespective of the medium for the high temperature annealed RuO₂ (700 °C), whereas the low temperature annealed RuO₂ (300 °C) is highly sensitive for the change in the pH of the solution. This is revealed by observing large Michaelis–Menten kinetic constant K _M for the RuO₂ (700 °C) than the low temperature annealed RuO₂ (300 °C) due to effective increase in the catalytic active sites similar to oxygen evolution reaction. Contrast to this, the buffer solution does not influence significantly the apparent K _M observed for RuO₂ (300 °C) and has greater impact on the high temperature 500 and 700 °C annealed RuO₂ samples. Cyclic voltammetry, chrono amperommetry, and electrochemical impedance spectroscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction techniques are used for characterization of the sensor behavior. The RuO₂–PVC–Nafion senses glucose selectively in the presence of potential interferences like fructose, galactose, mannose, sucrose, starch, uric acid, ascorbic acid, dopamine, and catechol in NaOH and phosphate buffer. Glucose sensing in the blood serum of the diabetic and nondiabetic patients is made. The results suggest that the RuO₂–PVC–Nafion is a promising candidate for the development of nonenzymatic glucose sensors.