Non-isothermal studies of adduct molecules of metallic halides with oxo-compounds in solid state. V

Non-isothermal studies of some adduct molecules of metallic halides with tetrahydropyran as the type MX₂(THP)_y in solid state, were carried out with a Derivatograph, where M  Mn(II), Co(II), Ni(II), Cu(II) or Cd(II), XCl^- or Br^-, THPtetrahydropyran and y0.1–1. These adduct molecules lost tetrahydropyran in single or multiple steps upon heating. Thermally stable intermediate products were isolated and characterised by elemental analysis and IR spectral measurement. The activation energy for each step of decomposition of the adduct was evaluated from the analysis of TG, DTG and DTA curves of the respective derivatogram. The enthalpy change was evaluated from the DTA peak area and the order of reaction was found to be unity, for each step of decomposition. Thermal parameters for the above adducts were compared with the adducts of other oxocompounds like dioxan, tetrahydrofuran, ethylene glycol dimethyl ether and diisopropyl ether.     

Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

Enhanced magnetic anisotropy of nickel nanosheet prepared in Na-4 mica

Nanosheets of nickel with thickness equal to 0.6 nm have been grown within the interlayer spaces of Na-4 mica. The sheets are made up of percolative clusters of nanodisks. Magnetization characteristics indicate a superparamagnetic behavior with a blocking temperature of 428 K. The magnetic anisotropy constant as extracted from the coercivity data has been found to be higher than that of bulk nickel by two orders of magnitude. This is ascribed to a large aspect ratio of the nickel nanophase. The Bloch exponent is also found to be considerably different from that of bulk nickel because of a size effect. The Bloch equation is still found to be valid for the two dimensional structures.     

Chromium Trioxide Supported onto Wet Silica Gel: Rapid Oxidation of Alcohols to Carbonyl Compounds Under Microwave Irradiation in Solventless System

In an environmentally benign system, alcohols are rapidly oxidized to carbonyl compounds using CrO 3 supported onto wet silica gel as an oxidant under microwave irradiation.     

Microwave Thermolysis: A Rapid and Selective Method for the Cleavage of THP Ethers Using CrO 3 Supported onto Zeolite in Solventless System

Oxidative deprotection of tetrahydropyranyl ethers (THP ethers) using chromium trioxide supported onto zeolite under microwave irradiation in solvent free condition is described.     

Synthesis of Bicyclic Compounds Derived from 1,2,4-Benzotriazines

The synthesis of bicyclic compounds derived from benzo[1,2,4]triazines is described.     

Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys

The crystallization behaviour and Curie temperature of melt-spun Co_{71? x} Fe _x Cr₇Si₈B₁₄ (x?=?0, 2, 3.2, 4, 6, 8 and 12?at.%) amorphous alloys have been studied. Differential scanning calorimetry (DSC) showed two stages of crystallization. The first stage of crystallization (T _X1) in the alloy with 6?at.%?Fe was the highest and it had the highest activation energy. X-ray diffraction studies revealed that the primary crystalline phase is hcp-(CoCr)₂Si for Fe-free alloy, whereas (CoFeCr)₂Si and (CoFeCr)₃Si phases were formed with the addition of Fe. hcp-Co was also formed along with these phases. The secondary crystalline phases were fcc-Co and various boron-rich phases. The Curie temperature of the alloys also changed with the addition of Fe to the system. Like the primary crystallization temperature, the Curie temperature of the alloys did not vary systematically with the Fe content. The addition of Fe to the Co-based system changes the nearest-neighbour interaction. This changes the exchange interaction between the transition metal elements. Due to the asymmetry in the Bethe–Slater curve, a systematic variation with Fe addition was not observed in the Curie temperature measurement.     

Composites of poly(ε‐caprolactone) and Mo6S3I6 Nanowires

Composites of poly(ε‐caprolactone) (PCL) and molybdenum sulfur iodine (MoSI) nanowires were prepared using twin‐screw extrusion. Extensive microscopic examination of the composites revealed the nanowires were well dispersed in the PCL matrix, although bundles of Mo₆S₃I₆ ropes were evident at higher loadings. Secondary electron imaging (SEI) showed the nanowires had formed an extensive network throughout the PCL matrix, resulting in increased electrical conductivity of PCL, by eight orders of magnitude, and an electrical percolation threshold of 6.5 × 10^?3 vol%. Thermal analysis (DSC), WAXD, and hot stage polarized optical microscopy (HSPOM) experiments revealed Mo₆S₃I₆ addition altered PCL crystallization kinetics, nucleation density, and crystalline content. A greater number of smaller spherulites were formed via heterogeneous nucleation. The onset of thermal decomposition (TGA) of PCL decreased by 70°C, a consequence of the thermal degradation of Mo₆S₃I₆ to MoO₃, which in turn accelerates the formation of volatile gases during the first stage of PCL decomposition. Copyright © 2010 John Wiley & Sons, Ltd.