Modeling the effects of type and concentration of organic modifiers, column type and chemical structure of analytes on the retention in reversed phase liquid chromatography using a single model

A previously proposed model for representing the retention factor (k) of an analyte in mixed solvent mobile phases was extended to calculate the k of different analytes with respect to the nature of analyte, organic modifier, its concentration and type of the stationary phase. The accuracy of the proposed method was evaluated by calculating mean percentage deviation (MPD) as accuracy criterion. The predicted vs. observed plots were also provided as goodness of fit criteria. The developed model prediction capability compared with a number of previous models (i.e. LSER, general LSER and Oscik equation) through MPD and fitting plots. The proposed method provided acceptable predictions with the advantage of modeling the effects of organic modifiers, mobile phase compositions, columns and analytes using a single equation. The accuracy of developed model was checked using the one column and one analyte out cross validation analyses and the results showed that the developed model was able to predict the unknown analyte retention and the analytes retentions on unknown column accurately.     

Synergistic coupled transport of uranyl ion across bulk liquid membrane mediated by dioxa-diazamacrocycle and oleic acid

Synergistic coupled transport of uranyl ion across a bulk liquid membrane of chloroform has been investigated using a dioxa-diazamacrocycle and oleic acid as carrier and synergistic agents, respectively. Quantitative transport of uranyl ion was achieved within 4 h when the pH of source solution was kept at 5.0–6.0 and mole ratio of carrier to synergistic agent was 1/15. It was found that overall rate and selectivity of the transport is governed by the stripping step. Finally, the influence of some foreign competitor ions including Al³⁺, Ca²⁺, CO₃^2?, Cu²⁺, Mg²⁺, Pb²⁺, Zn²⁺ and Th⁴⁺ and also the ionic strength on the transport efficiency has been evaluated.     

Syntheses, characterization and crystal structures of new mono- and bis-Schiff base compounds derived from 1,2,4-triazine and the silver(I) complexes containing mono-Schiff base ligands

Some new Schiff bases, (Z)-4-amino-3-((E)-(R-methoxybenzylidene)hydrazono)-6-methyl-3,4-dihydro-1,2,4-triazin-5(2H)-one (R?=?2 (L2), R?=?3 (L3) and R?=?4 (L4)), were synthesized by the condensation reactions of 4-amino-3-hydrazinyl-6-methyl-1,2,4-triazin-5(4H)-one (L1) and corresponding methoxybenzaldehyde in a molar ratio 1:1.5 in high yields. The reaction of L2 and L4 with an excess amount of the corresponding aldehydes gave the unsymmetrical bis-Schiff bases (E)-3-((E)-(R-methoxybenzylidene)hydrazono)-4-((E)-R-methoxybenzylideneamino)-6-methyl-3,4-dihydro-1,2,4-triazin-5(2H)-one (R?=?2 (L22) and R?=?4 (L44)), respectively. Furthermore, the reaction of L2?CL4 with silver(I) nitrate in a molar ratio 2:1 led to the silver(I)-complexes with the general formula [Ag(Lx)₂]NO₃ (Lx?=?L2 (2), L3 (3) and L4 (4)). All synthesized Schiff base compounds and complexes were characterized by a combination of IR-, ¹H-NMR spectroscopy, mass spectrometry and elemental analyses. In addition, the structures of L2, L4·CH₃CN, L22·CH₃OH and L44·CH₃OH and complexes 2 and 4 were determined by X-ray diffraction studies.     

Transesterification of Methylbenzoate with Alcohols Catalyzed by Natural Phosphate

Transesterification of methylbenzoate with various alcohols was catalyzed by natural phosphate with or without solvent in heterogeneous media. The molar ratio of alcohol/ester, solvent effect, and weight of catalyst effect have been studied. We have found that the nature of alcohol and the reaction temperature play an important role in the transesterification process. The catalyst can be regenerated and reused without lost of activity.     

Application of β-cyclodextrin in polymeric solid phase for separation and determination of lead in different environmental matrices

Immobilization of β-cyclodextrin on Dowex resin as an insoluble polymeric matrix by covalent bond presents a new solid-phase medium for preconcentration of Pb (II) at trace level in environmental samples prior to its flame atomic absorption spectrometric determination. The method is based on the sorption of lead after passing on modified Dowex sorbent in a column. The effect of several parameters such as pH, flow rate of sample, eluent kind and volume was investigated. The sorption capacity of the matrix has been found to be 0.4996?mg?g^?1 of adsorbent with the preconcentration factor of 250 for Pb (II). Nitric acid (3 M) as an eluent was sufficient to obtain quantitative recovery (>95%) for Pb (II). The optimum flow rate was 10?ml?min ^?1. The calibration curve was linear in the range of (3–250?ng?mL^?1) with a correlation coefficient of 0.9995. The limit of detection (LOD) based on three times the standard deviation of the blank was 1.37?ng?mL^?1. The relative standard deviation (RSD) for determination of 10?ng?mL^?1 and 100?ngmL^?1 of Pb (II) was 3.00 % and 0.58 % (n?=?10), respectively. The method was successfully applied to determination of lead in some environmental samples such as tap water, river water, soil and rice.     

Highly Efficient One-Pot Synthesis of N-Alkyl Sulfonamides from Alcohols Using N-(p-Toluenesulfonyl) Imidazole (Tsim)

Abstract

A facile and efficient method for one-pot synthesis of N-alkyl sulfonamides from alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this protocol, treatment of various potassium sulfonylamide salts and alcohols in the presence of TsIm and triethylamine in refluxing DMF furnishes the corresponding N-alkyl sulfonamides in good to excellent yields. This methodology is highly efficient for reaction of various structurally diverse primary and secondary alcohols as well as potassium sulfonylamides. Also, the density functional theoretical calculations are employed to mechanistically study this protocol.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.]     

Regioselective N‐Arylation of Some Pyrimidine and Purine Nucleobases

N‐Arylation of some pyrimidine and purine nucleobases in the presence of SiO₂ and Cs₂CO₃ under solvent‐free as well as in solution conditions is described. In these conditions, N1‐aryl pyrimidines and N9‐aryl purines have been obtained regioselectively in moderate to high yields with relatively short reaction times.     

Determination of aromatic amines in environmental water samples using solid-phase extraction modified with sodium dodecyl sulphate and micellar liquid chromatography

Extraction and determination of seven aromatic amines in environmental water samples were performed with solid-phase extraction (SPE) and micellar liquid chromatography (MLC) using experimental design. Extraction of aromatic amines was carried out with a C₁₈ cartridge modified with sodium dodecyl sulphate (SDS). The washing solution and elution solvent for extraction of aromatic amines were aqueous solution containing 5% (v/v) acetonitrile and 5% (v/v) acetone and 3 mL methanol, respectively. The chemometrics approach was applied for the separation optimisation of these compounds using MLC. Different mobile phase compositions were used for modelling based on retention times to obtain the best separation using central composite design. The optimum mobile phase composition for separation and determination of analytes in water samples was 69 mM SDS, 9% v/v 1-propanol and pH = 6.4. Recoveries were between 84.8–93.5% with relative standard deviation (RSD) less than 5.8% (n = 5). Limits of detection and linear range were 1–4.5 and 3.1–125.0 µg/L, respectively. The proposed method was applied to determine the aromatic amines in real samples (river and well waters). Amount of 4-nitroaniline and 3-nitroaniline in river water sample were 2.15 and 1.91 µg/L, respectively.     

Sonochemical synthesis of a new nano-scale 1D copper organic coordination polymer; thermal and spectroscopic characterizations

Single crystal of a new one-dimensional copper organic coordination polymer, 1D-CuOCP, [Cu(HL)NO₃]_n (1) Miyasaka, H., Saitoh, A., Abe, S. (2007) Coord. Chem. Rev., 251(21): 2622–2664.[Crossref], [Web of Science ®] , [Google Scholar] (H₂L = [2-[1-(2-hydroxy-propylimino)-ethyl]-phenol]) and its nanostructure, have been synthesized by slow evaporation of methanol solution of compound (1) Miyasaka, H., Saitoh, A., Abe, S. (2007) Coord. Chem. Rev., 251(21): 2622–2664.[Crossref], [Web of Science ®] , [Google Scholar] and sonochemical process respectively. Nanostructure of the complex was characterized by X-ray powder diffraction (XRD), FT-IR spectroscopy and scanning electron microscopy (SEM) and the structure of compound 1 was determined by single-crystal X-ray diffraction. Thermal stability of compound 1 in its nanosize form has also been studied by thermal gravimetric analysis (TGA). The effect of concentration of initial reagents on size and morphology of nanostructured compound 1 has been examined. The brightness of this study is to use the nanostructure of 1D-CuOCP as precursor to prepare single phase CuO nanoparticles via a solid-state decomposition procedure. Characterization methods confirmed that CuO nanoparticles with an average diameter of 40 nm were obtained from direct calcination of the precursor at 500°C under air.     

Mechanism and Parameters Controlling the Decomposition Kinetics of Na2SiF6 Powder to SiF4

Sodium hexafluorosilicate (Na₂SiF₆) powder has been used as a silicon source for formation of Si₃N₄ coatings by the hybrid precursor system‐chemical vapor deposition (HYSY‐CVD) route. The quantitative effect of processing time, temperature, gas flow rate, and process atmosphere (N₂ and N₂:5% NH₃) upon the fractional weight loss during the decomposition of Na₂SiF₆ was studied using a standard L₉ Taguchi experimental design and analysis of variance. The decomposition kinetics of Na₂SiF₆(s) was studied theoretically and experimentally in the temperature range of 550–650ºC by applying the shrinking core model. It was found that regardless of atmosphere type, the reaction order is n ≈ 0.12 and that a two‐stage mixed mechanism consisting of chemical reaction and boundary layer gas transfer controls the decomposition rate. The determined fractional weight loss during Na₂SiF₆ decomposition in nitrogen atmosphere is about 1.05–1.5 orders of magnitude greater than that in N₂:NH₃. The gas flow rate affects the dissociation activation energy, being of 121, 109, and 94 kJ/mol in N₂ and of 140, 120, and 115 kJ/mol in N₂:NH₃, for the flow rates of 20, 60, and 100 cm³/min, respectively, in both atmosphere types. A good agreement is observed by comparing experimental weight loss data with model predictions.