Simultaneous formation of platinum‐based nanocatalysts and degradation of dyes at oil/water interface: Comparative morphological and kinetic studies

To decrease the water pollution of textile industries with a large amount of toxic and non‐biodegradable colored dye effluents, an efficient technique is required to safely remove harmful pollutants. In this paper, the reaction between azo dyes and NaBH₄ catalyzed by nanoparticles (NPs) thin films has been studied. We report insitu degradation of methyl orange (MO) and methyl red (MR) by using Pt‐based thin films monitored by UV–Vis spectroscopy. We have synthesized different thin films such as Pt, PtPd, PtFeFe₂O₃, PtNi and PtAu films from Pt organometallic precursor in the MO and MR medium (dye degradation and NPs formation is happened simultaneously) and activity of these films were compared in the complete degradation of MO and MR dyes. Rate constants for the catalyzed reactions have been determined. PtPd NPs thin film has shown the highest rate constant for the degradation of MO and MR within only a few seconds due to its well‐ordered structure. Furthermore, the effect of presence of MO on the morphology of NPs was investigated.     

Nanosized cationic and anionic manganese porphyrins as mesoporous catalysts for the oxidation of olefins: Nano versus bulk aggregates

In this study, catalytic activity of bulk and nano‐sized meso‐tetrakis(4‐sulfonatophenyl)porphyrinatomanganese(III) acetate, MnTPPS₄(OAc), (ammonium salt) and meso‐tetrakis(3‐methylpyridyl)porphyrinatomanganese(III) acetate, MnT(3‐MePy)P(OAc) (tosylate salt) for the oxidation of olefins with tetra‐n‐butylammonium Oxone has been studied and compared with that of the bulk counterparts. The nanoparticles were prepared by mixing solvent techniques using water, (triethyleneglycol) monomethyl ether and dimethylsulfoxide or acetonitrile. The formation of nano‐sized catalysts was confirmed by UV‐Vis spectroscopy, DLS and AFM. Nitrogen porosimetry measurements indicated the homogeneous pore size distribution in the bulk and nano‐sized manganese porphyrins. In spite of the high oxidizability of Oxone, the heterogenized manganese porphyrins showed a significantly higher oxidative stability relative to their homogeneous counterparts within a reaction time of 6 h. The increase in the catalytic activity induced by the formation of nano‐sized catalysts was more pronounced in the case of MnT(3‐MePy)P(OAc). MnT(3‐MePy)P(OAc) may be recovered and reused for at least 4 times without any significant decrease in the catalyst efficiency. In the case of MnTPPS₄(OAc) a large decrease in the catalytic activity was observed after the first use of the catalyst. The latter was attributed to higher degrees of catalyst degradation in the case of MnTPPS₄(OAc).     

Influence of Macro-pores on DNAPL Migration in Double-Porosity Soil Using Light Transmission Visualization Method

Double porosity is a substantial microstructure characteristic in a wide range of geomaterials. It is a natural phenomenon that can be found in many types of soil, and it can result from biological, chemical or mechanical damage. In this paper, the influence of macro-pores on dense non-aqueous phase liquid (DNAPL) migration in double-porosity medium was investigated using light transmission visualization technique. Three experiments were carried out in two-dimensional flow chambers filled with a double-porosity medium composed of a mixture of local sand and sintered kaolin clay spheres arranged in a periodic manner. In each experiment, a different volumetric fraction of macro-pores and micropores was used. Tetrachloroethylene (PCE) was used to simulate DNAPL, and it was dyed using Oil-Red-O for better visualization. A predetermined amount of PCE was injected into the flow chambers and this amount was re-calculated using image analysis. A very strong correlation was found between the PCE amount injected and the amount calculated from image analysis in each experiment. The experiment was repeated by filling the flow chamber with silica sand to represent single-porosity medium. The results show that the macro-pores have a considerable effect on the PCE migration in double-porosity soil as the PCE movement was the fastest in the third experiment which contained the largest macro-pores volume. The accuracy of the method was validated using statistical analysis. The results show a slight difference between the means of the three experiments, indicating that the method is viable for monitoring NAPL migration in double-porosity medium under different volumetric fractions of macro-pores and micropores.     

Exploring the electro‐optical properties of conjugated polymers based on oligo‐selenophene and oligo(3,4‐ethylenedioxyselenophene)

For seeking high‐efficiency narrow‐band‐gap donor materials to enhance short‐circuit current density for organic solar cells, a series of oligo‐selenophene (OS) and oligo(3,4‐ethylenedioxyselenophene) (OEDOS) with various chain lengths were designed and characterized using density functional theory (DFT) and time‐dependent DFT calculations. Based on the results, it can be seen that with increasing chain length of the oligomers in both syn‐ and anti‐adding manners, the bond length alternation is decreased which indicates that the π‐electron delocalization is increased. Also, when the chain length is increased the electronic energy gap and the optical energy gap are decreased. It can be concluded that the syn‐(OS)_n=10,14,15, anti‐(OS)_n=14 and anti‐(OEDOS)_n=7–12 oligomers can act as low‐band‐gap polymers. Therefore they can absorb more sunlight based on maximum wavelength (higher than 620 nm). Furthermore, a red shift in the simulated absorption spectra of (OS)_n and (OEDOS)_n donors is observed. It is found that (OS)_n=14,15 with syn configuration of the extended oligomers is the most suitable donor for the design of high‐performance organic solar cells possessing a narrow electronic band gap, high exciton lifetime and broad and intense absorption spectra that cover the solar spectrum leading to complete light‐harvesting efficiency.     

Mo (CO)6‐assisted Pd‐supported magnetic graphene oxide‐catalyzed carbonylation‐cyclization as an efficient way for the synthesis of 4(3H)‐quinazolinones

In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)₆. The Mo (CO)₆ is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.     

Global solutions for nonlinear fuzzy fractional integral and integrodifferential equations

This paper is devoted to considering the existence and uniqueness results for fuzzy fractional integral equations employing the method of upper and lower solutions. Moreover, the approach is followed to prove the existence of solutions for the fuzzy initial value problem of fractional integrodifferential equations involving Riemann–Liouville differential operators. The method is illustrated by two examples.     

Investigation of the equality constraint effect on the reduction of the rotational ambiguity in three-component system using a novel grid search method

The obtained results by soft modeling multivariate curve resolution methods often are not unique and are questionable because of rotational ambiguity. It means a range of feasible solutions equally fit experimental data and fulfill the constraints. Regarding to chemometric literature, a survey of useful constraints for the reduction of the rotational ambiguity is a big challenge for chemometrician. It is worth to study the effects of applying constraints on the reduction of rotational ambiguity, since it can help us to choose the useful constraints in order to impose in multivariate curve resolution methods for analyzing data sets. In this work, we have investigated the effect of equality constraint on decreasing of the rotational ambiguity. For calculation of all feasible solutions corresponding with known spectrum, a novel systematic grid search method based on Species-based Particle Swarm Optimization is proposed in a three-component system.     

Multiplicity of positive solutions for a critical quasilinear elliptic system with concave and convex nonlinearities

In this paper, by using the Lusternik–Schnirelmann category, we obtain a multiplicity result for a quasilinear elliptic system with both concave and convex nonlinearities and critical growth terms in bounded domains.     

Preparation and Characterization of New Optically Active Poly(amide-imide)s from N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine and Aromatic Diamines

Five new optically active aromatic poly(amide-imide)s (PAIs) 5a–e were prepared from a direct polycondensation reaction of a new diacid of N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine 3 with various aromatic diamines 4a–e in a medium consisting of triphenyl phosphite (TPP), calcium chloride (CaCl₂), pyridine (Py) and N-methyl-2-pyrrolidone (NMP). The polycondensation reaction produced a series of novel poly(amid-imide)s 5a–e in quantitative yields with inherent viscosities of 0.39–0.51 dL/g. The resulting polymers were fully characterized by means of ¹H-NMR, FT-IR spectroscopy, elemental analyses, inherent viscosity, solubility test, specific rotation and thermal properties of them were investigated using TGA/DTG and differential scanning calorimeter (DSC). The diacid 4 was synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6- tetracarboxylic dianhydride 1 with L-isoleucine 2 in acetic acid solution.     

Fabrication of an Electrochemical L‐Cysteine Sensor Based on Graphene Nanosheets Decorated Manganese Oxide Nanocomposite Modified Glassy Carbon Electrode

The graphene nanosheets/manganese oxide nanoparticles modified glassy carbon electrode (GC/GNSs/MnOx) was simply prepared by casting a thin film of GNSs on the GC electrode surface, followed by performing electrodeposition of MnOx at applied constant potential. The GC/GNSs/MnOx modified electrode shows high catalytic activity toward oxidation of L ‐cysteine. Hydrodynamic amperometry determination of L ‐cysteine gave linear responses over a concentration range up to 120 µM with a detection limit of 75 nM and sensitivity of 27 nA µM^?1. The GC/GNSs/MnOx electrode appears to be a highly efficient platform for the development of sensitive, stable and reproducible L ‐cysteine electrochemical sensors.