<Superscript>1</Superscript>H and <Superscript>19</Superscript>F NMR relaxation time studies in (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>ZrF<Subscript>6</Subscript> superionic conductor

¹H and ¹⁹F spin-lattice relaxation times in polycrystalline diammonium hexafluorozirconate have been measured in the temperature range of 10–400 K to elucidate the molecular motion of both cation and anion. Interesting features such as translational diffusion at higher temperatures, molecular reorientational motion of both cation and anion groups at intermediate temperatures and quantum rotational tunneling of the ammonium group at lower temperatures have been observed. Nuclear magnetic resonance (NMR) relaxation time results correlate well with the NMR second moment and conductivity studies reported earlier.     

FTIR spectra of plasticized high molecular weight PVC–LiCF3SO3 electrolytes

Fourier transform infrared spectroscopy studies have been conducted to investigate the interaction among components in a system of high molecular weight polyvinylchloride (PVC)–lithium trifluoromethanesulfonate (LiCF₃SO₃) incorporated with different type of plasticizers, namely, ethylene carbonate (EC), propylene carbonate (PC), and dibutylphthalate (DBP). Interaction between PVC and LiCF₃SO₃ was confirmed by C–H rocking mode at 1,255 cm⁻¹ for PVC shift to 1,252 cm⁻¹ in PVC–LiCF₃SO₃. The plasticizers’ carbonyl (C=O) oxygen atom which carries lone pair electrons interact with Li⁺ of LiCF₃SO₃ and methine hydrogen of PVC in LiCF₃SO₃–plasticizer system and PVC–plasticizer system, respectively. Changes in peaks assigned to 1,264 cm⁻¹ (ν _as(SO₃)), 1,033 cm⁻¹ (ν _s(SO₃)), 1,181 cm⁻¹ (ν _as(CF₃)), 1,230 cm⁻¹ (ν _s(CF₃)), 765 cm⁻¹ (δ _s(CF₃)), 644 cm⁻¹ (δ _s(SO₃)), 578 cm⁻¹ (δ _as(CF₃)), and 519 cm⁻¹ (δ _as(SO₃)) indicate the occurrence of complexation in the PVC–LiCF₃SO₃ system, LiCF₃SO₃–plasticizer system, and PVC–LiCF₃SO₃–plasticizer system.     

Strain-induced polarization rotation in epitaxial (001) BiFeO3 thin films

Direct measurement of the remanent polarization of high quality (001)-oriented epitaxial BiFeO3 thin films shows a strong strain dependence, even larger than conventional (001)-oriented PbTiO3 films. Thermodynamic analysis reveals that a strain-induced polarization rotation mechanism is responsible for the large change in the out-of-plane polarization of (001) BiFeO3 with biaxial strain while the spontaneous polarization itself remains almost constant.     

Influence of γ-ray-induced effects on dielectric dispersion of CuO-doped calcium fluoroborophosphate glass system

γ-Ray-induced dielectric dispersion in CaF₂–B₂O₃–P₂O₅ glasses doped with different concentrations of CuO was investigated. The glass samples were exposed to γ-rays with dose varying within the range 0–10 kGy. The dielectric dispersion and spectroscopic properties were measured before and after γ-ray treatment. Additionally, thermoluminescence studies were performed on post-irradiated glass samples. The results of dielectric properties and dielectric breakdown strength indicated a substantial increase in the insulating strength of CuO containing glasses due to γ-ray irradiation. The analysis of these results together with UV-vis optical absorption, IR spectra, and thermoluminescence studies have indicated a gradual increase in the concentration of mono-valent copper ions due to γ-ray treatment of the glass network. The additional studies have confirmed that these Cu⁺ ions occupy network-forming positions, increase the polymerization of the borophosphate glass network, and facilitates for the increase of insulating strength of the titled glass.     

Investigation of dibutyl phthalate as plasticizer on poly(methyl methacrylate)–lithium tetraborate based polymer electrolytes

Polymer electrolyte membranes, comprising of poly(methyl methacrylate) (PMMA), lithium tetraborate (Li₂B₄O₇) as salt and dibutyl phthalate (DBP) as plasticizer were prepared using a solution casting method. The incorporation of DBP enhanced the ionic conductivity of the polymer electrolyte. The polymer electrolyte containing 70 wt.% of poly(methyl methacrylate)–lithium tetraborate and 30 wt.% of DBP presents the highest ionic conductivity of 1.58 × 10⁻⁷ S/cm. The temperature dependence of ionic conductivity study showed that these polymer electrolytes obey Vogel–Tamman–Fulcher (VTF) type behaviour. Thermogravimetric analysis (TGA) was employed to analyse the thermal stability of the polymer electrolytes. Fourier transform infrared (FTIR) studies confirmed the complexation between poly(methyl methacrylate), lithium tetraborate and DBP.     

Contact hypersurfaces of Kaehler manifolds

Contact hypersurfaces of a Kaehler manifold have been characterized and classified, assuming the second fundamental form to be Codazzi (in particular, parallel). We have also discussed the special cases when the ambient space is a (i) Calabi-Yau manifold and (ii) a complex space-form.     

Measurement of internal stresses via the polarization in epitaxial ferroelectric films

The relations between electrical and mechanical properties of constrained ferroelectric films are analyzed. It is shown that the internal stresses and the elastic constants can be determined through the measurement of the electrical response. The change in the polarization is proportional to internal stresses due to film-substrate misfit, whereas the linear electrical and electromechanical responses to external field do not depend on the misfit and are determined by the film constraint. The theoretical results are successfully applied to PbZr 0.2Ti 0.8O (3) films on (001) LaAlO (3) substrate which exhibit a considerable increase in the saturation polarization due to epitaxial stresses. Significant recovery in the piezoelectric constant and susceptibility is theoretically predicted and experimentally verified for specific film configurations which reduce the degree of constraint. The concept presented in this Letter can be expanded to constrained ferromagnetic and superconductor films.     

Optical and hydrophobic properties of co-sputtered chromium and titanium oxynitride films

The chromium and titanium oxynitride films on glass substrate were deposited by using reactive RF magnetron sputtering in the present work. The structural and optical properties of the chromium and titanium oxynitride films as a function of power variations are investigated. The chromium oxynitride films are crystalline even at low power of Cr target (≥60 W) but the titanium oxynitride films are amorphous at low target power of Ti target (≤90 W) as observed from glancing incidence X-ray diffraction (GIXRD) patterns. The residual stress and strain of the chromium oxynitride films are calculated by sin² ψ method, as the average crystallite size decreases with the increase in sputtering power of the Cr target, higher stress and strain values are observed. The chromium oxynitride films changes from hydrophilic to hydrophobic with the increase of contact angle value from 86.4° to 94.1°, but the deposited titanium oxynitride films are hydrophilic as observed from contact angle measurements. The changes in surface energy were calculated using contact angle measurements to substantiate the hydrophobic properties of the films. UV-vis and NIR spectrophotometer were used to obtain the transmission and absorption spectra, and the later was used for determining band gap values of the films, respectively. The refractive index of chromium and titanium oxynitride films increases with film packing density due to formation of crystalline chromium and titanium oxynitride films with the gradual rise in deposition rate as a result of increase in target powers.     

Structural,electrical, and transport number studies of AgI-doped silver borotellurite fast ion conducting glass system

Silver ion conducting glass system composed of xAgI–(100???x)[0.444 Ag₂SO₄–0.555 (0.4TeO₂–0.6B₂O₃)] has been prepared by melt quenching method for x?=?0 to 80 in step of 10. XRD, DSC, FTIR, and SEM were carried out to understand some structural properties of prepared samples. XRD and DSC studies of the samples with x?≤?60 show predominantly glassy nature. Electrical parameters and activation energies of all the samples were evaluated by complex impedance analysis and Arrhenius plots of DC conductivity, respectively. Carrier concentration, mobility, inter-ionic distance, and ionic conductivity of samples were measured and discussed. It is observed that the conductivity varies with increasing the temperature and composition. The highest conductivity (1.8?×?10^?1 S cm^?1) and ionic current (8.33 μA) is observed for =?50 sample at room temperature; hence, it can be used as best electrolyte material for solid-state battery application.     

Forced responses of solid axially polarized piezoelectric ceramic finite cylinders with internal losses

A method is presented to determine the forced responses of piezoelectric cylinders using weighted sums of only certain exact solutions to the equations of motion and the Gauss electrostatic conditions. One infinite set of solutions is chosen such that each field variable is expressed in terms of Bessel functions that form a complete set in the radial direction. Another infinite set of solutions is chosen such that each field variable is expressed in terms of trigonometric functions that form a complete set in the axial direction. Another solution is used to account for the electric field that can exist even when there is no vibration. The weights are determined by using the orthogonal properties of the functions and are used to satisfy specified, arbitrary, axisymmetric boundary conditions on all the surfaces. Special cases including simultaneous mechanical and electrical excitation of cylinders are presented. All numerical results are in excellent agreement with those obtained using the finite element software ATILA. For example, the five lowest frequencies at which the conductance and susceptance of a stress-free cylinder, of length 10 mm and radius 5 mm, reach a local maximum or minimum differ by less than 0.01% from those computed using ATILA.