Products active on mosquitoes,IV: Synthesis and biological activity of 8-propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl ethers

Summary A series of 8-proparglyoxy-3,7-dimethyl-2,6-octadienyl and 8-propargyloxy-3,7-dimethyl-6-octenyl ethers were prepared from 8-hydroxygeranyl and 8-hydroxycitronellyl ethers, respectively. Almost all compounds showed high toxicity toCulex quinquefaciatus larvae at 1 mgl^–1 dose level.

---

Gegen Mücken aktive Produkte, 4. Mitt.: Synthese und biologische Aktivität von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl-ethern

Zusammenfassung Eine Reihe von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl- und 8-propargyloxy-3,7-dimethyl-6-octenyl-ethern wurden aus 8-Hydroxygeranyl- bzw. 8-Hydroxycitronellyl-ethern hergestellt. Fast alle Verbindungen zeigten hoch Toxizität gegenüber Larven vonCulex quinquefaciatus in einer Dosierung von 1 mgl^–1.

     

A new method for determining the local environment and orientation of individual side chains of membrane-binding peptides

We studied here the binding of the mastoparan X peptide to a zwitterionic lipid bilayer (POPC) and demonstrated that nitrile-derivatized amino acids can be used to determine the hydration state (or change in hydration state) of specific sites of membrane-interactive peptides (upon binding). We have also shown that polarized ATR-FTIR measurements can further be used to uncover information regarding the spatial orientation of individual side chains as well as their conformational preference within the lipid bilayer.     

Syntheses,characterization, X-ray crystal structures and emission properties of copper(II), zinc(II) and cadmium(II) complexes of pyridyl–pyrazole derived Schiff base ligand – Metal selective ligand binding modes

The varying coordination modes of the title ligand, L [5-methyl-1-(pyridin-2-yl)-N′-[pyridin-2-ylmethylidene]pyrazole-3-carbohydrazide] towards the different metal centers is reported by preparation and characterization of Cu(II), Zn(II) and Cd(II) complexes, [Cu(L)NO₃.H₂O](NO₃) (1) [Zn(L)₂](ClO₄)₂·2DMF (2) and [Cd(L)(I)₂] (3) respectively. In 1, the neutral ligand serves as tetradentate 4 N donor where both pyridine and pyrazole nitrogen atoms of pyridyl–pyrazole part are coordinatively active, leaving the carbonyl oxygen of the carbohydrazide part inactive. The same pyridine and pyrazole N atoms remain abstained from the coordination process towards the Zn(II) and Cd(II) metal centers. For 2 and 3 the ligand behaves as a tridentate NNO donor where the two nitrogen atoms come from azomethine, pyridine of pyridine-2-carbaldehyde parts and O from carbonyl oxygen atoms (carbohydrazide part). The complex 1 and 2 are distorted octahedral while complex 3 adopts distorted square pyramidal geometry. All the complexes are X-ray crystallographically characterized.     

Quantitative Characterization of Bovine Serum Albumin, α-Lactalbumin and β-Lactoglobulin in Commercial Whey Sample by RP-LC

A simple, sensitive and precise reverse phase liquid chromatographic method has been developed and validated for quantification of bovine serum albumin (BSA), α-lactalbumin (α-La) and β–lactoglobulin (β-Lg) that are removed from whey waste by foam fractionation method. The data is reproducible over a wide concentration range. This optimized method allowed analysis of BSA, α-La, β-Lg in a mixture within 5 min and could be applied to the analysis of a variety of commercial and laboratory whey products within a short time.     

Thermal‐initiating potentialities of vinyl polyperoxides: Transmutation of block‐into‐block copolymer and an exploratory investigation of surface texture and morphology

This article describes the first comprehensive study on the use of vinyl polyperoxides, namely, poly(α‐methyl styrene peroxide) (PMSP) and poly(styrene peroxide) (PSP), as thermal initiators for the synthesis of active polymers, PMSP–PS–PMSP/PSP–PS–PSP, by free‐radical polymerization with styrene. The active polymers have been characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography analysis. The PMSP–PS–PMSP/PSP–PS–PSP is further used as the thermal macroinitiator for the preparation of another block copolymer, PS‐b‐PMMA, through the reaction of the active polymers with methyl methacrylate. The mechanism of the block copolymer formation is discussed. Having established the scanning micrograph details of the homopolymer phases, we analyze the surface features and morphology of the block copolymer. Furthermore, the distinction in appearance is highlighted with a view toward strengthening the chemistry with the structural appearance in materials processed differently. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3665–3673, 2000     

Influence of sputter power on structural and electrical properties of TiO2 films for Al/TiO2/Si gate capacitors

Titanium dioxide (TiO₂) thin films were deposited onto p‐Si substrates held at room temperature by reactive Direct Current (DC) magnetron sputtering at various sputter powers in the range 80–200 W. The as‐deposited TiO₂ films were annealed at a temperature of 1023 K. The post‐annealed films were characterized for crystallographic structure, chemical binding configuration, surface morphology and optical absorption. The electrical and dielectric properties of Al/TiO₂/p‐Si structure were determined from the capacitance–voltage and current–voltage characteristics. X‐ray diffraction studies confirmed that the as‐deposited films were amorphous in nature. After post‐annealing at 1023 K, the films formed at lower powers exhibited anatase phase, where as those deposited at sputter powers > 160 W showed the mixed anatase and rutile phases of TiO₂. The surface morphology of the films varied significantly with the increase of sputter power. The electrical and dielectric properties on the air‐annealed Al/TiO₂/p‐Si structures were studied. The effect of sputter power on the electrical and dielectric characteristics of the structure of Al/TiO₂/p‐Si (metal‐insulator‐semiconductor) was systematically investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysis of polyamidoamine dendrimers by isoelectric focusing

Polyamidoamine dendrimers have been studied extensively for their potential applications in nanomedicine. Their uses as imaging, drug, and nucleic acid delivery agents are nearing clinical trials. As such, characterization of polyamidoamine dendrimers and their nano-devices is of immense importance for monitoring the efficiency of their synthesis, purity, and quality control of manufactured products as well as their in vivo behavior. We report here the analysis of polyamidoamine dendrimers possessing various cores and surface groups with a simple and inexpensive isoelectric focusing method. The isoelectric points of the dendrimers were readily determined from a calibration plot generated by running proteins with known pI values. The isoelectric points for various surface-modified polyamidoamine dendrimers ranged from 4 to 9. Polyamidoamine dendrimers possessing terminal hydroxyl groups gave a pI?>?7, while those with terminal carboxyl groups exhibit a pI?<?7. Generation number and cores of the dendrimers did not significantly affect their isoelectric points. Isoelectric focusing thus offers another important tool for characterizing these nanomolecules.

Modulation of the lowest metal-to-ligand charge-transfer state in [Ru(bpy)2(N-N)]2+ systems by changing the N-N from hydrazone to azine: photophysical consequences

Two Ru(II) complexes, [Ru(bpy)2L](ClO4)2 (1) and [Ru(bpy)2L'](BF4)2 (2), where bpy is 2,2'-bipyridine, L is diacetyl dihydrazone, and L' 1:2 is the condensate of L and acetone, are synthesized. From X-ray crystal structures, both are found to contain distorted octahedral RuN(6)(2+) cores. NMR spectra show that the cations in 1 and 2 possess a C2 axis in solution. They display the expected metal-to-ligand charge transfer (1MLCT) band in the 400-500 nm region. Complex 1 is nonemissive at room temperature in solution as well as at 80 K. In contrast, complex 2 gives rise to an appreciable emission upon excitation at 440 nm. The room-temperature emission is centered at 730 nm (lambda(em)(max)) with a quantum yield (Phi(em)) of 0.002 and a lifetime (tau(em)) of 42 ns in an air-equilibrated methanol-ethanol solution. At 80 K, Phi(em) = 0.007 and tau(em) = 178 ns, with a lambda(em)(max) of 690 nm, which is close to the 0-0 transition, indicating an 3MLCT excited-state energy of 1.80 eV. The radiative rate constant (5 x 10(4) s(-1)) at room temperature and 80 K is almost temperature independent. From spectroelectrochemistry, it is found that bpy is easiest to reduce in 2 and that L is easiest in 1. The implications of this are that in 2 the lowest (3)MLCT state is localized on a bpy ligand and in 1 it is localized on L. Transient absorption results also support these assignments. As a consequence, even though 2 shows a fairly strong and long-lived emission from a Ru(II) --> bpy CT state, the Ru(II) --> L CT state in 1 shows no detectable emission even at 80 K.     

Enhanced photocatalytic and adsorptive degradation of organic dyes by mesoporous Cu/Al2O3-MCM-41: intra-particle mesoporosity, electron transfer and OH radical generation under visible light

Mesoporous Cu/Al(2)O(3)-MCM-41 composite was synthesized by two step processes; in situ incorporation of high surface area mesoporous Al(2)O(3) (MA) into the framework of MCM-41 (in situ method) followed by impregnation of Cu(II) by incipient wetness method. The interesting thing is that starch was used for the first time as template for the preparation of high surface area MA. To evaluate the structural and electronic properties, these catalysts were characterized by low angle X-ray diffraction (LXRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), UV-vis DRS, FTIR and photoluminescent (PL) spectra. The various cationic dye such as methylene blue (MB), methyl violet (MV), malachite green (MG) and rhodamine 6G (Rd 6G) of high concentration 500 mg L(-1) were degraded and adsorbed very efficiently (100%) using the 5 Cu/Al(2)O(3)-MCM-41 composite within 30 and 60 min, respectively. The high and quick removal of such concerted cationic organic dyes and also mixed dyes (MB+MV+MG+Rd 6G) by means of photocatalysis/adsorption is basically due to the combined effect three characteristics of synthesized mesoporous 5 Cu/Al(2)O(3)-MCM-41 composite. These characteristics are intra-particle mesoporosity, electron transfer and ˙OH radical generation under solar light.