Dual input–output pairs for modeling hysteresis inspired by mem-models

We call attention to a dual-pair concept for modeling hysteresis involving instantaneous switching: Specifically, there are two input–output pairs for each hysteresis model under one specific input, namely a differential pair and an integral pair. Currently in engineering mechanics, only one pair is being recognized and utilized, not the other. Whereas this dual-pair concept is inherent in the differential and algebraic forms of memristors and memcapacitors, the concept has not been carried over to memristive system theory, nor to memcapacitive system theory. We show that the “zero-crossing” feature in memristors, memcapacitors, and memristive/memcapacitive models (i.e., the “mem-models”) is also a feature of the differential pairs of well-known non-mem-models, examples of which are Ramberg–Osgood, Bouc–Wen, bilinear hysteresis, and classical Preisach. The dual-pair concept thus connects mem-models and non-mem-models, thereby facilitating the modeling of hysteresis, and raising a set of scientific questions for further studies that might not otherwise come to awareness.     

Retention profile of Fe,Mn and Cu onto chemically treated polyurethane with carbon disulfide

Dithiocarbamate modified polyurethane foam (DTC-PUF) was synthesized as a new solid-phase extraction sorbent for the preconcentration and determination of Fe(II), Mn(II) and Cu(II) in environmental samples using flame atomic absorption spectrometry. Maximum extraction of the elements was achieved at pH 5–7 and flow rate 3 mL min^?1. Quantitative desorption was achieved by 10 mL from 1.0 mol L^?1 HCl solution. The capacity of the sorbent was 149.2 ± 0.5, 237.5 ± 0.2, 200.2 ± 0.1 μg g^?1 and the limit of detection was of 0.015, 0.015 and 0.012 μg mL^?1for Fe(II), Mn(II) and Cu(II), respectively. A preconcentration factor of 100 was obtained for all elements. The developed method was successfully applied to the determination of the tested elements in water (tap and lake) and plant (spinach and parsley leaves) samples and showed good recovery values from 98 to 111% with corresponding RSD values ranged from 0.6 to 8.6%.     

Experimental comparison of performance and emission characteristics of 4-stroke CI engine operated with Roselle and Jatropha biodiesel blends

The environmental degradation, combined with the continuous depletion of the world's fossil fuel reserves, has forced the search for alternative fuels. This study was performed to investigate the performance of novel biodiesels in the CI engine. The experiments were performed at three different compressions ratios (16:1, 17:1, 18:1) and four loading conditions (25%, 50%, 75%, 100%). Different types of fuels such as jatropha biodiesel (JB), roselle biodiesel (RB), and ternary biodiesel (TB) were prepared and analyzed. The thermal performance of different fuels was analyzed in terms of brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), and exhaust gas temperature (EGT). The emission characteristics such as CO₂ emission, NO_x emission, and smoke emission were analyzed for all types of fuels. The results of these fuels in the engine were compared with mineral diesel (MD). The BTE was increased with increasing compression ratios and loads for all types of fuels. The BSFC was increased with increasing compression ratios but decreased with increasing loads. The increase in emission of NO_x was observed at higher compression ratios and loads. However, the CO₂ emission was decreased at higher loads and lower compression ratio. The performance curves achieved with a 20% jatropha biodiesel blend showed results that were approximate to those obtained with pure MD. The comparative analysis between different fuels showed that JB exhibit higher thermal performance as compared to other biodiesels. Therefore, JB can be a better alternative to conventional fuel.     

Production of Terretonin N and Butyrolactone I by Thermophilic Aspergillus terreus TM8 Promoted Apoptosis and Cell Death in Human Prostate and Ovarian Cancer Cells

The anticancer activity of terretonin N (1) and butyrolactone I (2), obtained from the thermophilic fungus Aspergillus terreus TM8, was intensively studied against prostate adenocarcinoma (PC-3) and ovary adenocarcinoma (SKOV3) human cell lines. According to this study, both compounds showed potent cytotoxicity towards ovarian adenocarcinoma cells (SKOV3) with IC₅₀ 1.2 and 0.6 μg/mL, respectively. With respect to metastatic prostate cells (PC-3), the two compounds 1 and 2 showed a significantly promising cytotoxicity effect with IC₅₀ of 7.4 and 4.5 μg/mL, respectively. The tested fungal metabolites showed higher rates of early and late apoptosis with little or no necrotic apoptotic pathway in all treated prostate adenocarcinoma (PC-3) and ovary adenocarcinoma (SKOV3) human cell lines, respectively. The results reported in this study confirmed the promising biological properties of terretonin N (1) and butyrolactone I (2) as anticancer agents via the induction of cellular apoptosis. However, further studies are needed to elucidate the molecular mechanism by which cellular apoptosis is induced in cancer cells.     

Keggin-type heteropoly-11-molybdo-1-vanadophosphoric acid supported montmorillonite K-10 clay-catalysed one-pot multi-component synthesis of chromeno[2,3-b]indoles

One-pot three-component synthesis of twelve different chromeno[2,3-b]indole derivatives were achieved by the condensation of β-naphthol, oxindole and various substituted aldehydes. Two more chromeno[2,3-b]indole derivatives were also synthesized through one-pot two-component condensation of salicylaldehyde with oxindole/chlorooxindole. Both the condensations were achieved by using Keggin-type heteropoly-11-molybdo-1-vanadophosphoric acid, H₄[PVMo₁₁O₄₀] supported on montmorillonite K-10 clay for about 10% as catalyst under environmentally benign solvent-free reaction condition. Shorter reaction time, excellent yield of product, sustainability of catalytic material and simple workup procedure under green experimental conditions are the advantages of this protocol.

     

Structural,Magnetic and Catalytic Properties of a New Vacancy Ordered Perovskite Type Barium Cobaltate BaCoO2.67

A new vacancy ordered, anion deficient perovskite modification with composition of BaCoO_2.67 (Ba₃Co₃O₈□₁) has been prepared via a two-step heating process. Combined Rietveld analysis of neutron and X-ray powder diffraction data shows a novel ordering of oxygen vacancies not known before for barium cobaltates. A combination of neutron powder diffraction, magnetic measurements, and density functional theory (DFT) studies confirms G-type antiferromagnetic ordering. From impedance measurements, the electronic conductivity of the order of 10⁻⁴ S cm⁻¹ is determined. Remarkably, the bifunctional catalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is found to be comparable to that of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3–y, confirming that charge-ordered anion deficient non-cubic perovskites can be highly efficient catalysts.     

Fabrication of Sensitive Potentiometric Cholesterol Biosensor Based on Co3O4 Interconnected Nanowires

Highly sensitive, selective, reliable and inexpensive cholesterol biosensors are highly demanded for the routine monitoring of cholesterol molecules in order to prevent heart failure incidents. In this study, Co₃O₄ nanostructures are synthesized using polyvinyl pyrrolidone surfactant as growth template by a low temperature aqueous chemical growth method. The morphology of nanostructures was investigated by scanning electron microscopy and X‐ray diffraction techniques. The nanostructures exhibit interconnected nanowires like morphology with interconnected network of nanowires. The nanostructures of Co₃O₄ are polycrystalline. The cholesterol oxidase was physically adsorbed on the interconnected nanowires of Co₃O₄ for the chemical sensing of cholesterol molecules. The sensor device detected a wide range of cholesterol from 1×10^?7 M to 1×10^?3 M concentrations with sensitivity of ?94.031 mV/decade. A detection limit of 0.035×10^?7 M cholesterol concentration was observed and a fast response time of 10 s was also noticed. The fabricated device is highly stable, selective, sensitive, reproducible and repeatable. All the collected information about presented cholesterol biosensor indicates its potential application for the monitoring of cholesterol concentrations from human blood serum and real‐life samples.     

Synthesis and in vitro anticancer activity of some novel tetrahydroquinoline derivatives bearing pyrazol and hydrazide moiety

A new series of tetrahydroquinoline derivatives having pyrazol and hydrazide moieties were synthesized for the purpose of anticancer cell line evaluation. Syntheses of these compounds were firstly achieved by one pot four reactions. The reaction of 3-amino-tetrahydro-1H-pyrazolo [3,4-b]quinolin with aldehydes, indoline-2,3-dione derivatives to give 9a-c , 11a-c , and 13a,b , respectively. In similar manner for biological comparison, the reactions of compound 5 with the same aldehydes and indoline-2,3-dione derivatives to give 19a-c and 20a-c . The newly synthesized compounds were examined in vitro for their cytotoxic activity against HepG-2 and A549 cancer cells. The compounds 11a-c and 20a-c showed promising activity as anticancer agents against HepG-2 and A549 cancer cells.     

Taming the Reactivity of Phosphiranium Salts: Site-Selective C-Centered Ring Opening for Direct Synthesis of Phosphinoethylamines

Advances in the field of phosphorus chemistry are documented, by revealing the synthetic utility of previously underutilized quaternary phosphiranium salts (QPrS) as three-chain-atom electrophilic building blocks. Notably, control of their challenging C-centered electrophilicity is disclosed with an expedient synthesis of tertiary β-anilino phosphines as a proof-of-concept.