The Aldehyde Ketone Rearrangement. Rearrangement of Bis(4-methoxyphenyl)-acetaldehyde into 4,4′-Dimethoxydeoxybenzoin

The formyl carbonyl group in bis(4-methoxyphenyl)-acetaldehyde does not contribute to the formation of the carbonyl group in 4,4′-dimethoxydeoxybenzoin when the former rearranges to the latter by treatment with 50% (w/w) sulfuric acid.     

Copper(II) complex of 3-cinnamalideneacetylacetone: Synthesis and characterisation

A bidentate ligand derived from cinnamaldehyde and acetylacetone and its copper(II) complex have been synthesized and characterized by elemental analysis, UV-Vis, IR, ESR and magnetic susceptibility measurements. Magnetic susceptibility measurements, ESR and electronic spectral data indicate the presence of six coordinated Cu(II) ion. The ligand and complex are tested for antibacterial activity againstPseudomonas aeroginosa. They are found to show the antibacterial activity.     

Comparison of Two Stability-Indicating Chromatographic Methods for the Determination of Mirabegron in Presence of Its Degradation Product

Mirabegron is a novel β₃-adrenoceptor agonist containing an amide group. It was subjected to stress conditions of acidic and alkaline hydrolyses. The hydrolytic degradation product was isolated and its structure was confirmed using mass and IR spectrometry. Two stability-indicating chromatographic methods have been proposed for the determination of mirabegron. TLC method was applied using silica gel as stationary phase and chloroform–methanol–ammonia (9.0:1.0:0.1 by volume) as the mobile phase, and chromatograms were scanned at 250 nm. Accurate determination of the drug was achieved over the concentration range of 2–12 μg per band. In addition, an isocratic HPLC method was developed on Agilent C18 column (150 mm × 4.5 mm I.D., particle size 5 µm) using ethanol-phosphate buffer pH 2.5 (30:70, by volume) as a mobile phase with flow rate of 1 mL min^?1.The intact drug was detected at 250 nm with running time less than 5 min. Mirabegron was determined accurately in a concentration range of 1–25 µg mL^?1. The proposed chromatographic methods were applied successfully for the assay of mirabegron in pharmaceutical dosage form and both methods were validated as per the International Conference on Harmonization guidelines and statistically compared with a reported gradient HPLC method.     

An application of the mannich reaction using hydroxylamine and some of its derivatives. 6-Substituted-2,4-diamino-5,6,7,8-tetrahydropyrimido[4,5-dpyrimidines

Hydroxylamine and some of its O -substituted derivatives ( 2 ) have been used as the amine component in Mannich reactions with 2,4,6-triaminopyrimidine ( 1 ). The resulting 6-substituted tetrahydropyrimido[4,5-d]-pyrimidines ( 3 ) contain an N-0 bond linking the substituent to the ring. These results extend the utility of this modified Mannich reaction to otherwise inaccessible substituents. Reaction conditions, spectral data and certain limitations of the reaction are discussed.     

Simple syntheses of benzothiazol‐2‐ylazoles

Syntheses of the title ring systems are described starting with benzothiazol‐2‐ylacetohydrazide (1). Thus, 1 was reacted with carbon disulfide to afford the 2‐methyl heteroaryl derivative 2, which on reaction with hydrazine hydrate yielded the corresponding triazole compound 3. Also, 1 can undergo a reaction with an isothiocyanate to give the N‐thiocarbonyl adduct 4 that can then be cyclized to produce a 2‐methyl heteroaryl analog 5 or 6. Compounds 8 or 9 could be obtained by the reaction of 1 with an aryl aldehyde followed by malononitrile or via its self‐cyclization, respectively. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 177–182, 1999     

Saturated heterocycles. 57. Synthesis of 4-substituted-9,10-dialkoxy-1,6,7,11b-tetrahydro-2H-pyrimido[6,1-a]isoquinolin-2-ones

A large number of 4-substituted-9,10-dialkoxy-1,6,7,11b-tetrahydropyrimido[6,1-a]isoquinolin-2-ones were prepared by the reaction of 1-(ethoxycarbonylmethyl)-6,7-dialkoxy-1,2,3,4-tetrahydroisoquinolines with iminoethers. Reaction of the corresponding isoquinoline-1-acetic acid derivatives with iminoethers led to the formation of N-acyl-1,2,3,4-tetrahydroisoquinolin-1-acetamides. In the hydrolysis of the prepared 4-substituted-pyrimido[6,1-a]isoquinolin-2-ones, the corresponding N-acyl-1,2,3,4-tetrahydroisoquinolin-1-acetamides were obtained. While reduction of the 4-phenyl derivative resulted in the corresponding 1,3,4,6,7,11b-hexahydropyrimidinone. The steric structures of the tetrahydro- and hexahydropyrimido[6,1-a]isoquinolines were determined by nmr spectroscopy.     

Ni+Pd+Ga and Ni+Pd+in liquid alloys: Enthalpies of formation

In order to fill the evident gap in the thermodynamic data of nickel-palladium-gallium and nickel-palladium-indium ternary alloys, the enthalpies of formation of these systems in the liquid state have been determined. This was achieved by means of a very high temperature calorimeter (T<1800 K), using the direct drop method, and based on analogous measurements of the respective binary alloys previously published. Complete automation of the calorimeter led to a good precision even at the highest temperatures. The enthalpies of formation of the ternary liquid alloys were measured between 1400 and 1600 K on the whole composition range. As in the limiting binary systems, enthalpies of formation are negative and non temperature dependent at any composition.

---

Zusammenfassung Um die Lücke hinsichtlich thermodynamischer Daten von Nickel-Palladium-Gallium und Nickel-Palladium-Indium Legierungen zu füllen, wurden die Bildungsenthalpien dieser ternÄren Systeme im flüssigen Zustand bestimmt. Dies erfolgte mittels eines Kalorimeters für sehr hohe Temperaturen (T<1800 K), unter Verwendung der direkten Einwurfmethode auf der Basis früher veröffentlichter Messungen an den entsprechenden binÄren Systemen. Die Bildungsenthalpien der flüssigen ternÄren Legierungen wurden zwischen 1400 und 1600 K über den gesamten Zusammensetzungsbereich bestimmt. VollstÄndige Automation des Kalorimeters bewirkte hohe PrÄzision selbst bei den höchsten Temperaturen. Wie in den begrenzenden binÄren Systemen sind die Bildungsenthalpien negativ und bei allen Zusammensetzungen nicht temperaturabhÄngig.

     

New ceramic microfiltration membranes from mineral coal fly ash

This work aims to develop a new mineral porous tubular membrane based on mineral coal fly ash. Finely ground mineral coal powder was calcinated at 700 °C for about 3 h. The elaboration of the mesoporous layer was performed by the slip casting method using a suspension made of the mixture of fly ash powder, water and PVA. The obtained membrane was submitted to a thermal treatment which consists in drying at room temperature for 24 h then a sintering at 800 °C. SEM photographs indicated that the membrane surface was homogeneous and did not present any macro defects (cracks, etc.). The average pore diameter of the active layer was 0.25 μm and the thickness was around 20 μm. The membrane permeability was 475 l/h m² bar.This membrane was applied to the treatment of the dying effluents generated by the washing baths in the textile industry. The performances in term of permeate flux and efficiency were determined and compared to those obtained using a commercial alumina microfiltration membrane. Almost the same stabilised permeate flux was obtained (about 100 l/h m²). The quality of permeate was almost the same with the two membranes: the COD and color removal was 75% and 90%, respectively.     

Multi-residue analysis and ultra-trace quantification of 36 priority substances from the European Water Framework Directive by GC-MS and LC-FLD-MS/MS in surface waters

A multi residue analysis was developed for screening, quantification and confirmation of 36 priority organic compounds included in the 2000/60/EC European Water Framework Directive. The compounds analyzed included 19 pesticides, 8 PAH, 5 endocrine-disruptors and 4 organochlorine compounds. The method was developed in three steps. First, automated off-line solid-phase extraction using Strata X cartridges was optimized to trap simultaneously the 36 studied compounds. Second, the more volatile compounds were analysed by gas chromatography coupled to mass spectrometry with electron impact ionisation in selected ion monitoring mode (SIM). Third, the last 20 compounds were detected and quantified, in one run, by liquid chromatography coupled to fluorescence detector and tandem mass spectrometry. The excellent selectivity and sensitivity allowed us satisfactory quantification and confirmation at levels as low as 0.2-67 ng L⁻¹ with recoveries between 59 and 105%. Such methodology was then applied to French surface waters: all the waters present organic contaminants, and their concentration varied according to the origin and nature of substances.     

Solubility of pyrene in simple and mixed solvent systems

The solubility of pyrene was experimentally determined in simple and complex solvent systems (single, binary, ternary, quaternary and pentinary solvent systems) composed of benzene, ethylbenzene, hexane, hexanol and methylcyclohexane over a temperature range from 293 to 318 K. In addition, six models were used in this study to represent pyrene solubility in the different solvent systems. The interaction parameters for modified Wilson, NIBS/Redlich-Kister, UNIQUAC and NRTL models were estimated using the solubility data generated for pyrene in single, binary and ternary solvent systems. By re-adjusting the interaction parameters reported for Dortmund UNIFAC and ASOG models, a better representation of the solubility of pyrene was obtained compared to using reported values. Furthermore, a correction term is introduced for the ASOG model in this study to better improve pyrene solubility prediction in simple and mixed solvent systems. These estimated or re-adjusted interaction parameters for the different models, along with the reported parameters for Dortmund UNIFAC and ASOG models, were tested on complex solvent systems (quaternary and pentinary solvent mixtures), in order to check their validity and accuracy for such predictions.