Emanation Thermal Analysis of SiC Based Materials

Results of emanation thermal analysis (ETA) characterizing microstructure changes of SiC based materials during heat treatment in argon are demonstrated. This method made it possible to reveal fine changes of the texture of SiC nano-sized powders, SiC micro-sized powders and SiC whiskers under in situconditions of the heating. ETA curves can serve as fingerprints of the respective samples.This revised version was published online in November 2005 with corrections to the Cover Date.     

X-ray investigation of the role of the mixed emulsifier in the structure formation in o/w creams

The aim of this research work was to clarify the role of the mixed emulsifier in the structure formation and water binding mode in the case of o/w creams prepared with different surfactants. The swelling behavior of mixed emulsifiers was examined by means of direct investigation methods such as transmission electron microscopy (TEM) and X-ray diffraction. The detailed structure image of the creams was created with the help of the latter. The influence of the structure of the hydrophilic gel phase, and the structural changes during storage were studied with rheological methods. On the basis of the results, it can be stated that the investigated creams had different structures from those mentioned in the literature: surfactant did not create a mixed bilayer with the structure to furnish fatty amphiphile; instead, micelles were formed. These results correlated well with the results of the rheological tests.     

PPP-Berechnungen und Vergleich der Elektronenspektren von iso-π-elektronischen Sauerstoff-, Stickstoff-, Schwefel- und Selenheterocyclen

Zusammenfassung 42 Heterocyclen, die sich formal von alternierenden und nichtalternierenden Kohlenwasserstoffen durch Ersatz einer Doppelbindung durch die Heteroatome Sauerstoff, Stickstoff, Schwefel und Selen ableiten, werden nach dem Pariser-Parr-Pople-Verfahren berechnet und ihre Spektren im nahen Ultraviolett und Sichtbaren beschrieben. Schwefel und Selen werden dabei im LCAO-MO-Verfahren nach dem p-Modell behandelt. In den meisten Fällen können die Berechnungen nicht nur die spektralen Charakteristika gut wiedergeben, sondern auch Beziehungen in den Spektren iso--elektronischer Verbindungen gleicher Struktur verständlich machen. Berechnungen an kationischen Stickstoffheterocyclen führten dann zu falschen Ergebnissen, wenn die Stickstoffparameter vom Pyrroltyp übernommen werden.

---

PPP-calculations and comparison of electronic spectra of iso--electronic oxygen, nitrogen, sulfur, and selenium heterocycles

42 heterocyclic compounds, formally derived from alternant or nonalternant hydrocarbons by replacing a C=C group by an oxygen, nitrogen, sulfur or selenium atom, are studied by the Pariser-Parr-Pople-type of calculation. By means of these results the near ultraviolet and visible spectra are described. The sulfur and the selenium atoms are treated in the LCAO-MO-method using the p-model. In most cases spectral features are not only well reproduced, but interrelations of the spectra of iso--electronic compounds, possessing analogous structures are interpreted, too. On calculating cationic nitrogen heterocycles using parameters of pyrrol type nitrogen results are unsatisfactory.

---

Résumé 42 composés hétérocycliques, formellement dérivés d'hydrocarbures alternants ou non alternants par remplacement d'un groupement C=C par un atome d'oxygène, d'azote, de soufre ou de sélénium, sont étudiés par la méthode de Pariser-Parr-Pople. Les résultats obtenus permettent de décrire le spectre U.V. proche et visible. Soufre et sélénium sont traités en utilisant le modèle p. Dans la plupart des cas les caractères spectraux sont non seulement correctement reproduits, mais les relations entre les spectres des composés iso--électroniques à structures analogues peuvent être interprétées. Les calculs concernant les heterocycles à azote cationique sont insatisfaisants lorsqu'ils sont effectués avec des paramètres de l'azote du type pyrrole.

---

---

Anmerkung: Die Arbeit wurde in dem von Prof. Dr. R. Mayer geleiteten Schwefelarbeitskreis der TU Dresden durchgeführt.     

Multilayered Cu–Ti deposition on silicon substrates for chemiresistor applications

Abstract

On the perspective to develop CuO–TiO₂ MOS, multilayered Cu and Ti thin layers were alternatively deposited on silicon wafers using 25?keV Ar?+?ion beam sputtering and, subsequently, oxidized by thermal annealing in air at 400?°C for 24?h. The deposited films have variable ratios of the Cu and Ti % at. One of the main goal is to obtain such multilayers avoiding the presence of Cu–Ti–O compounds. The samples were characterized in terms of composition (by RBS and SIMS analyses) and morphology (by AFM and SEM investigations). In particular, SIMS maps allows to observe the spatial distribution and thickness of each phase of the Cu/Ti multilayers, and further to observe Cu diffusion and mixing with Ti, as well as phase separation of CuO and TiO₂ in the samples. The reasons of this effect represent an open issue that has to investigated, in order to improve the MOS fabrication.     

Intercalation of Dyes Containing SO3H Groups into Zn–Al Layered Double Hydroxide

The intercalates of Naphthol Yellow S, Tropaeolin 000, and Tropaeolin 00 were prepared by heating [Zn_0.67Al_0.33(OH)₂](CO₃)_0.165 · 0.5H₂O with acidic forms of the dye solutions in an open reaction vessel. The intercalates were characterized by chemical and thermal analysis, X-ray powder diffraction and UV–VIS spectroscopy. A possible arrangement of the dye molecules in the intercalates was suggested on the basis of their chemical compositions and interlayer distances, by taking into account van der Waals dimensions of the guest molecules and by assuming that the structure of the host layers is not changed during the intercalation process.     

Possibilities of two non-isothermal procedures (temperature- or rate-controlled) for kinetical studies

The applicability of both conventional Thermal Analysis (TA) and Controlled Rate Thermal Analysis (CRTA) for kinetic analysis is discussed. It is shown that TA method can give a reliable kinetic information and meaningful kinetic parameters especially for solid state transformation. On the other hand the CRTA method is more suitable for decomposition process where one or more gasses are evolved. A consistent and reliable method of kinetic analysis is proposed for both techniques. This method is illustrated to analyze the crystallization process of chalcogenide glass and the decomposition of dolomite.     

A semi-empirical dim calculation of the resonant energy and autoionization width of the He(23S)—H2 system

The DIM method is used to compute the resonant energy and the autoionization width for a wide range of configurations of the He(2³S)—H₂ syste     

Some radiation protection problems connected with the use of186Re-HEDP and153Sm-EDTMP for palliative therapy of bone metastases

The paper deals with the problem of the outpatient administration of¹⁸⁶Re-HEDP and¹⁵³Sm-EDTMP for palliative therapy of bone metastases. The subsequent 6 hours stay of the treated patients in a department of nuclear medicine appears to be in compliance with regulations proposed in the Czech Republic as well as with ICRP recommendations.     

Effect of support on the synergy in HDS of thiophene and HDN of pyridine over Mo sulfide catalysts promoted by Rh

The effect of support (SiO₂-Al₂O₃, Al₂O₃,MgO) of the Rh-Mo(S) sulfide catalysts on the synergy in hydrodesulfurization (HDS) of thiophene and hydrodenitrogenation (HDN) of pyridine was studied. The synergy in HDS was between 7–10 regardless of the kind of support used. The synergy in HDN varied from none over the MgO supported sample to about 3 over SiO₂-Al₂O₃ supported catalyst, in accord with the positive effect of increasing support acidities. This revised version was published online in June 2006 with corrections to the Cover Date.