Enhanced magnetic anisotropy of nickel nanosheet prepared in Na-4 mica

Nanosheets of nickel with thickness equal to 0.6 nm have been grown within the interlayer spaces of Na-4 mica. The sheets are made up of percolative clusters of nanodisks. Magnetization characteristics indicate a superparamagnetic behavior with a blocking temperature of 428 K. The magnetic anisotropy constant as extracted from the coercivity data has been found to be higher than that of bulk nickel by two orders of magnitude. This is ascribed to a large aspect ratio of the nickel nanophase. The Bloch exponent is also found to be considerably different from that of bulk nickel because of a size effect. The Bloch equation is still found to be valid for the two dimensional structures.     

Chromium Trioxide Supported onto Wet Silica Gel: Rapid Oxidation of Alcohols to Carbonyl Compounds Under Microwave Irradiation in Solventless System

In an environmentally benign system, alcohols are rapidly oxidized to carbonyl compounds using CrO 3 supported onto wet silica gel as an oxidant under microwave irradiation.     

Microwave Thermolysis: A Rapid and Selective Method for the Cleavage of THP Ethers Using CrO 3 Supported onto Zeolite in Solventless System

Oxidative deprotection of tetrahydropyranyl ethers (THP ethers) using chromium trioxide supported onto zeolite under microwave irradiation in solvent free condition is described.     

Synthesis of Bicyclic Compounds Derived from 1,2,4-Benzotriazines

The synthesis of bicyclic compounds derived from benzo[1,2,4]triazines is described.     

Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys

The crystallization behaviour and Curie temperature of melt-spun Co_{71? x} Fe _x Cr₇Si₈B₁₄ (x?=?0, 2, 3.2, 4, 6, 8 and 12?at.%) amorphous alloys have been studied. Differential scanning calorimetry (DSC) showed two stages of crystallization. The first stage of crystallization (T _X1) in the alloy with 6?at.%?Fe was the highest and it had the highest activation energy. X-ray diffraction studies revealed that the primary crystalline phase is hcp-(CoCr)₂Si for Fe-free alloy, whereas (CoFeCr)₂Si and (CoFeCr)₃Si phases were formed with the addition of Fe. hcp-Co was also formed along with these phases. The secondary crystalline phases were fcc-Co and various boron-rich phases. The Curie temperature of the alloys also changed with the addition of Fe to the system. Like the primary crystallization temperature, the Curie temperature of the alloys did not vary systematically with the Fe content. The addition of Fe to the Co-based system changes the nearest-neighbour interaction. This changes the exchange interaction between the transition metal elements. Due to the asymmetry in the Bethe–Slater curve, a systematic variation with Fe addition was not observed in the Curie temperature measurement.     

Composites of poly(ε‐caprolactone) and Mo6S3I6 Nanowires

Composites of poly(ε‐caprolactone) (PCL) and molybdenum sulfur iodine (MoSI) nanowires were prepared using twin‐screw extrusion. Extensive microscopic examination of the composites revealed the nanowires were well dispersed in the PCL matrix, although bundles of Mo₆S₃I₆ ropes were evident at higher loadings. Secondary electron imaging (SEI) showed the nanowires had formed an extensive network throughout the PCL matrix, resulting in increased electrical conductivity of PCL, by eight orders of magnitude, and an electrical percolation threshold of 6.5 × 10^?3 vol%. Thermal analysis (DSC), WAXD, and hot stage polarized optical microscopy (HSPOM) experiments revealed Mo₆S₃I₆ addition altered PCL crystallization kinetics, nucleation density, and crystalline content. A greater number of smaller spherulites were formed via heterogeneous nucleation. The onset of thermal decomposition (TGA) of PCL decreased by 70°C, a consequence of the thermal degradation of Mo₆S₃I₆ to MoO₃, which in turn accelerates the formation of volatile gases during the first stage of PCL decomposition. Copyright © 2010 John Wiley & Sons, Ltd.     

Design and optimization of high-performance microring-based uni-traveling carrier photodiode for WDM optical systems

This paper presents the design principles of a novel optimized microring-based uni-traveling carrier photodiode (MR-UTC-PD), for wavelength division multiplexing (WDM) optical systems. The fundamental parameters for output characteristics such as quantum efficiency and 3-dB bandwidth of MR-UTC-PD are discussed. We analyze the effects of basic parameters as effective ring radius, definite coupling condition and the suitable cross section on the MR-UTC-PD main characteristics for high performance of the device. It is shown that the maximum quantum efficiency and most efficient performance of the device can be obtained at critical coupling condition. We show that the maximum 3-dB bandwidth and an efficient approach for high bandwidth-efficiency product can be achieved at overcoupling condition. In this regard, some design curves are presented for the optimized MR-UTC-PD.     

OXIDATIVE DEPROTECTION OF TRIMETHYLSILYL ETHERS WITH HEXAMETHYLENETETRAMINEBROMINE SUPPORTED ONTO SILICA GEL UNDER MICROWAVE IRRADIATION IN SOLVENTLESS SYSTEM

Hexamethylenetetramine-bromine supported onto[3pc] silica gel rapidly converts trimethylsilyl ethers to their corresponding carbonyl compounds under microwave irradiation in solventless system.     

On the relationship between distinction and irreducibility of parabolic induction

Let $U_{2n}$ denote the quasi-split unitary group over 2n variables with respect to a quadratic extension $E/F$ of p-adic fields. In this short note, we relate ${\mathrm{GL}}_n(F)$-distinction of ladder representations of ${\mathrm{GL}}_n(E)$ with irreducibility of its Siegel parabolic induction in $U_{2n}$.     

Microfunnel‐filter‐based emulsification microextraction followed by gas chromatography for simple determination of organophosphorus pesticides in environmental water samples

A simple and fast method named microfunnel‐filter‐based emulsification microextraction is introduced for an efficient determination of some organophosphorus pesticides including diazinon, malathion, and chlorpyrifos in the environmental samples including the river, sea, and well water. This method is based upon the dispersion of a low‐toxicity organic solvent (dihexyl ether), as the extractant, in a high volume of an aqueous sample solution (45 mL). It is implemented without a centrifugation step, and using a syringe filter and a micro‐funnel, the phase separation and transfer of the enriched analytes to the gas chromatograph are simply achieved. By filtration of the extractant phase, a suitable sample clean‐up is obtained, and the total extraction time is just a few minutes. The factors influencing the extraction efficiency are optimized, and under the optimal conditions, the proposed method provides a good linearity (in the range of 15–1500 ng/mL (R² > 0.996). A high enrichment factor is obtained (in the range of 306–342), and the method provides low limits of detection and quantification (in the ranges of 4–8 and 15–25 ng/mL, respectively).