Volumetric and viscometric studies of urea in binary aqueous solutions of glucose at different temperatures

Densities and viscosities of urea in (1.0, 2.5, and 5.0) mass% of aqueous glucose solutions have been measured at T = (298.15, 303.15, 308.15, and 313.15) K, respectively. Apparent molar volumes, limiting partial molar volume, and relative viscosity have been obtained from the density and viscosity data. Limiting partial molar expansibilities have also been calculated from the temperature dependence of limiting partial molar volumes. The viscosity data has been analyzed using the Jones–Dole equation. The results are used to establish the nature of solute–solute and solute–solvent interactions. The activation parameters of viscous flow have also been calculated on the basis of transition state treatment of the relative viscosity. Result shows that the solute acts as water structure breaker and posses’ weak solute–solvent interaction.     

Transition Metal Ions or Acid-induced Suppression of Photoinduced Proton Transfer and Electron Transfer Reaction in 5-(4-Fluorophenyl)-2-hydroxypyridine: A Molecule of Dual Mode Fluorosensitivity

The photophysical properties of 5-(4-fluorophenyl)-2-hydroxypyridine (FP2HP) at different pH and its fluorescence response toward different transition metal ions have been studied by steady-state absorption and emission spectroscopy in combination with quantum chemical calculations. Although keto-enol tautomerization is observed in the excited state, the molecule is weakly fluorescent due to the presence of electron-rich nitrogen atom and relatively electron-deficient fluorine atom, which may lead to photoinduced electron transfer process. In the presence of the transition metal ions, such as Zn²⁺, Cd²⁺, Hg²⁺, etc., the studied molecule exhibits changes in its absorption and emission properties. The present system shows fluorescence enhancement instead of usual quenching in presence of the transition metal ions, such as Fe²⁺ and Cu²⁺. Spectral observation leads to the interpretation that this structurally simple molecule can be effectively utilized as a chelation-enhanced fluorescence-based chemosensor for the detection of transition metal ions. The experimental findings corroborate well with theoretical calculations at Hartree–Fock level using 6-31G** and lanl2dz basis sets.     

Fiber-laser-based green-pumped continuous-wave singly-resonant optical parametric oscillator

Stable, high-power, second-harmonic-generation (SHG) of a compact CW Ytterbium (Yb) fiber laser at 1064 nm into the green and its use as a pump source for CW singly-resonant optical parametric oscillator (SRO) is demonstrated. Using a simple single-pass SHG configuration in MgO:sPPLT, as much as 9.6 W of single-frequency green radiation at 532 nm is generated from 30 W of fundamental power at a conversion efficiency of 32.7% in a Gaussian spatial profile with a beam quality factor of M ² < 1.3. Thermal effects have been investigated at different fundamental power levels and various thermal management schemes are employed to maximize the second-harmonic power. The green source is successfully deployed to pump a CW SRO tunable over 855–1408 nm, generating up to 2.1 W of idler at 1168 nm. The peak-to-peak idler power stability is better than 10.7% over 40 min, with beam quality factor M ² < 1.26 for the idler and M ² < 1.52 for the signal.     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

Characteristics of electrochemically grown dendritic metallic zinc

A simple electrochemical process has been implemented to fabricated fractal structured leaf-like metallic zinc. The fabricated material was structurally characterized using X-ray diffraction that reveals the hexagonal unit cell structure. Also the growth of the structure is anisotropic. Field emission scanning electron microscopic images revealed clearly the leaf-like morphology of the fabricated material is fern like and ∼500 μm in length, ∼50-60 μm wide and the platelets thickness is ∼5 μm. The growth of this structure is diffusion controlled and locally accomplished with the oriented attachment. Raman shift measurement revealed the existence of surface optical phonon modes which is very significant for surface defects.     

Solubility of carbon dioxide in aqueous solution of 2-amino-2-methyl-1-propanol and piperazine

In this work, new experimental results of the vapour-liquid equilibrium (VLE) of CO₂ in aqueous 2-amino-2-methyl-1-propanol (AMP) and piperazine (PZ) have been presented in the temperature range of 298-328 K and PZ concentration range of 2-8 mass%, keeping the total amine concentration in the solution at 30 mass%. The partial pressures of CO₂ were in the range of 0.1-1450 kPa. A thermodynamic model was developed to correlate and predict the VLE of CO₂ in aqueous AMP + PZ. The electrolyte nonrandom two liquid (ENRTL) theory has been used to develop the VLE model for the quaternary system (CO₂ + AMP + PZ + H₂O) to describe the equilibrium behaviour of the solution. The experimental data from this work and data available in the literature were used to regress the ENRTL interaction parameters. The model predictions are in good agreement with the experimental data of CO₂ solubility in aqueous blends of this work as well as those reported in the literature. The current model can also predict speciation, heat of absorption, pH of the CO₂ loaded solution, and amine volatility.     

Volumetric and viscometric studies of glucose in binary aqueous solutions of urea at different temperatures

Densities and viscosities of glucose in (1.0, 2.5, and 5.0) mass% aqueous urea solutions have been measured at T = (298.15, 303.15, 308.15, and 313.15) K, respectively. Apparent molar volumes, limiting partial molar volume, and relative viscosity have been obtained from the density and viscosity results. Limiting partial molar expansibilities have also been calculated from the temperature dependence of limiting partial molar volumes. The viscosity data have been analyzed by using the modified Jones–Dole equation. The results are used to establish the nature of solute–solute and solute–solvent interactions. Transition state treatment of the relative viscosity was also used for the calculation of activation parameters of viscous flow. Pour findings show that the solute acts as a water structure former and provides strong solute–solvent interaction.     

Contrasting Response of Two Dipolar Fluorescence Probes in a Leucine‐Based Organogel and Its Implications

The microenvironments of a leucine‐based organogel are probed by monitoring the fluorescence behavior of coumarin 153 (C153) and 4‐aminophthalimide (AP). The steady‐state data reveals distinctly different locations of the two molecules in the gel. Whereas AP resides close to the hydroxyl moieties of the gelator and engages in hydrogen‐bonding interactions, C153 is found in bulk‐toluene‐like regions. In contrast to C153, AP exhibits excitation‐wavelength‐dependent emission, indicating that the environments of the hydrogen‐bonded AP molecules are not all identical. A two‐component fluorescence decay of AP in gel, unlike C153, supports this model. A time‐resolved fluorescence anisotropy study of the rotational motion of the molecules also reveals the strong association of only AP with the gelator. That AP influences the critical gelation concentration implies its direct involvement in the gel‐formation process. The results highlight the importance of guest–gelator interactions in gels containing guest molecules.     

Unitary group adapted state specific multireference perturbation theory: Formulation and pilot applications

We present here a comprehensive account of the formulation and pilot applications of the second‐order perturbative analogue of the recently proposed unitary group adapted state‐specific multireference coupled cluster theory (UGA‐SSMRCC), which we call as the UGA‐SSMRPT2. We also discuss the essential similarities and differences between the UGA‐SSMRPT2 and the allied SA‐SSMRPT2. Our theory, like its parent UGA‐SSMRCC formalism, is size‐extensive. However, because of the noninvariance of the theory with respect to the transformation among the active orbitals, it requires the use of localized orbitals to ensure size‐consistency. We have demonstrated the performance of the formalism with a set of pilot applications, exploring (a) the accuracy of the potential energy surface (PES) of a set of small prototypical difficult molecules in their various low‐lying states, using natural, pseudocanonical and localized orbitals and compared the respective nonparallelity errors (NPE) and the mean average deviations (MAD) vis‐a‐vis the full CI results with the same basis; (b) the efficacy of localized active orbitals to ensure and demonstrate manifest size‐consistency with respect to fragmentation. We found that natural orbitals lead to the best overall PES, as evidenced by the NPE and MAD values. The MRMP2 results for individual states and of the MCQDPT2 for multiple states displaying avoided curve crossings are uniformly poorer as compared with the UGA‐SSMRPT2 results. The striking aspect of the size‐consistency check is the complete insensitivity of the sum of fragment energies with given fragment spin‐multiplicities, which are obtained as the asymptotic limit of super‐molecules with different coupled spins. © 2015 Wiley Periodicals, Inc.     

Selective Halogenation Using an Aniline Catalyst

Electrophilic halogenation is used to produce a wide variety of halogenated compounds. Previously reported methods have been developed mainly using a reagent‐based approach. Unfortunately, a suitable “catalytic” process for halogen transfer reactions has yet to be achieved. In this study, arylamines have been found to generate an N‐halo arylamine intermediate, which acts as a highly reactive but selective catalytic electrophilic halogen source. A wide variety of heteroaromatic and aromatic compounds are halogenated using commercially available N‐halosuccinimides, for example, NCS, NBS, and NIS, with good to excellent yields and with very high selectivity. In the case of unactivated double bonds, allylic chlorides are obtained under chlorination conditions, whereas bromocyclization occurs for polyolefin. The reactivity of the catalyst can be tuned by varying the electronic properties of the arene moiety of catalyst.