Assessment of the Fe-Sn-Zn phase diagram at 450°C

The Fe-Sn-Zn system is of interest because Sn is one element added to the Zn galvanizing bath to overcome the drawbacks due to the presence of Si in semi-killed steels. This work has been undertaken with the aim to understand the tin effect on the microstructure and the layers growth in batch galvanized coatings on low alloyed steels. Various experimental techniques such as metallography, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX) are used in order to characterize the microstructure and the properties of such coatings elaborated in a zinc bath enriched with tin. Solidification phenomena and layers growth mechanisms during galvanization are explained by means of the ternary phase diagram Fe-Sn-Zn at 450°C. The Calphad method allows to obtain this phase diagram from the three optimized binary phase diagrams Fe-Sn, Fe-Zn and Sn-Zn and some experimental data inside the ternary Fe-Sn-Zn system.     

Ab initio studies of the allylic hydroxylation: DFT calculation on the reaction of 2-methyl-2-butene with selenium dioxide

The mechanism of the allylic oxidation of 2-methyl-2-butene with selenium dioxide has been investigated by ab initio quantum mechanics. Transition states for two major steps (an ene reaction and a [2,3]-sigmatropic rearrangement) of this reaction have been optimized by the B3LYP/6-311+G(d,p) method. A comparison of the energies of the transition states shows that the anti-endo and syn-endo approaches are the efficient routes in the ene reaction and the methyl (C4) group is sited in a pseudo-equatorial environment in cyclic transition states during the [2,3]-rearrangement. Calculations also show the kind of the terminal alkyl (C4) substituents may control (E)-selectivity in the formation of the allylic alcohols.     

Electrolytic reduction of spent oxide fuel in a molten LiCl-Li2O system

Summary The Advanced Spent Conditioning Process (ACP) developed by the KAERI is based on pyrometallurgy and the electrolytic reduction plays a central role in transforming spent oxide fuels into metals. The constituents of the spent fuels are distributed between a salt and a reduced metal phase during electrolysis. Lithium metal is produced in a molten LiCl-Li₂O cell and then it reacts with the metal oxides of the spent fuel producing Li₂O and reduced metals. By focusing on the activity of Li₂O and the electric potential, the electrolytic reduction process of the ACP is discussed. Thermodynamic considerations are defined and operation conditions are proposed including Li₂O activity and cell potential.     

Synthesis and crystal structures of novel calix[4]azacrowns

A series of novel 1,3‐altemate calix[4]arene azacrowns having mono and bis crown ethers on the lower rim of the calix[4]arene framework were synthesized. Solid‐state structures confirmed the three dimensional conformation of compounds 1–3.     

A re-statement of the Hohenberg–Kohn theorem and its extension to finite subspaces

Bearing in mind the insight into the Hohenberg–Kohn theorem for Coulomb systems provided recently by Kryachko (Int J Quantum Chem 103:818, 2005), we present a re-statement of this theorem through an elaboration on Lieb’s proof as well as an extension of this theorem to finite subspaces. Contribution to the Serafin Fraga Memorial Issue.     

Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

The catalyst used in fluidized catalytic cracking (FCC) units of refineries after several recovery cycles in regeneration units, reduces its activity and it is partially substituted by new catalyst in the process. As it has a high silicon and aluminum oxides content, the pozzolanic properties of a Brazilian FCC spent residual catalyst, used in different substitution degrees to cement, were evaluated by three thermal analysis techniques during the early stages of hydration of a type II Portland cement. NCDTA curves show in real time that the residual catalyst, accelerates the stages of cement hydration. TG and DSC curves of respective pastes after 24 h of hydration evidence the pozzolanic activity of the waste, respectively, by the lower water mass loss during the dehydroxylation of the residual calcium hydroxide and by the lower dehydroxylation endothermal effect. Within the analyzed period, the higher is the cement substitution degree, the higher is the pozzolanic activity of the residual catalyst.     

Sorption behavior of Co(II) on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the presence of humic acid

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The extent of sorption of divalent metal cations is controlled by a number of factors including cosorbing or complexing. In this work, the effects of pH, humic acid HA/Co(II) addition orders, ionic strength, concentration of HA, and foreign cations on the Co(II) sorption on γ-Al₂O₃ in the presence of HA were investigated. The sorption isotherms of Co(II) on γ-Al₂O₃ in the absence and presence HA were also studied and described by using S-type sorption model. The experimental results showed that the Co(II) sorption is strongly dependent on the pH values, concentration of HA, but independent of HA/Co(II) addition orders, ionic strength, and foreign cations in the presence of HA under our experimental conditions. The results also indicated that HA enhanced the Co(II) sorption at low pH, but reduced the Co(II) sorption at high pH. It was hypothesized that the significantly positive influence of HA at low pH on the Co(II) sorption on γ-Al₂O₃ was attributed to strong surface binding of HA on γ-Al₂O₃ and subsequently the formation of ternary surface complexes such as ≡S-OOC-R-(COO⁻) _x Co^2−x . Chemi-complexation may be the main mechanism of the Co(II) sorption on γ-Al₂O₃ in the presence of HA.     

Differential conductance switching of planar tunnel junctions mediated by oxidation/reduction of functionally protected ferrocene

Planar tunnel junctions were fabricated by self-assembling 1,1'- ferrocenedicarboxylic acid (FDCA) onto native oxides of thermally deposited aluminum films and subsequently depositing a second aluminum film. Junctions were characterized using Reflection-Absorption Fourier Transform Infrared Spectroscopy (RAIRS) and current-voltage (I-V) spectroscopy. Before deposition of the second aluminum film, RAIRS of FDCA and ferrocenecarboxylic acid (FCA) films revealed COO(-), C=O, and Fc ring stretching modes, indicating that both types of molecules can interact strongly with the oxide and remain intact. After deposition, systems exhibited prominent COO(-) modes and weakened C=O modes, indicating further reaction with aluminum/aluminum oxide. Fc ring modes persisted in FDCA systems but disappeared in FCA systems, suggesting that the second COOH group in the FDCA molecule can act as a protecting group for the ferrocene moiety. Cyclic I-V measurements of FDCA tunnel junction systems revealed very strong ( approximately 10-fold) hysteretic differential conductance switching that was both reversible and stable. Control measurements using as prepared junctions, as well as junctions containing 1,6-hexanedioic acid, 1,9-nonanedioic acid, 1,4-dibenzoic acid, or FCA revealed only very weak ( approximately 10%) differential conductance changes. We attribute FDCA junction switching to barrier profile modifications induced by oxidation/reduction of the functionally protected ferrocene moieties.     

Forwards and backwards – synthesis of Laurencia natural products using a biomimetic and retrobiomimetic strategy incorporating structural reassignment of laurefurenynes C–F

Laurefurenynes C–F are four natural products isolated from Laurencia species whose structures were originally determined on the basis of extensive nuclear magnetic resonance experiments. On the basis of a proposed biogenesis, involving a tricyclic oxonium ion as a key intermediate, we have reassigned the structures of these four natural products and synthesized the four reassigned structures using a biomimetic approach demonstrating that they are the actual structures of the natural products. In addition, we have developed a synthesis of the enantiomers of the natural products laurencin and deacetyllaurencin from the enantiomer of (E)-laurefucin using an unusual retrobiomimetic strategy. All of these syntheses have been enabled by the use of tricyclic oxonium ions as pivotal synthetic intermediates.

The synthesis and structural reassignment of laurefurenynes C–F has been achieved, with the new structures fitting with a proposed biosynthesis. Also reported is the synthesis of ent-laurencin and ent-deacetyllaurencin via a retrobiomimetic approach.