Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

Enveloping algebras that are principal ideal rings

Let L be a restricted Lie algebra over a field of positive characteristic. We prove that the restricted enveloping algebra of L is a principal ideal ring if and only if L is an extension of a finite-dimensional torus by a cyclic restricted Lie algebra.     

Determination of trace bismuth by under-potential deposition-stripping voltammetry at mesoporous platinum microelectrodes: application to pharmaceutical products

A methodology for the determination of bismuth, based on under-potential deposition-stripping voltammetry (UPD-SV), was investigated. It makes use of mesoporous platinum microelectrodes (Pt-MEs) prepared by a liquid crystal templating technique. The mesoporous microelectrodes, which are characterised by a very high surface area, allowed the accumulation of relatively large amounts of bismuth at under-potential without saturation of the electrode surface. Calibration plots for quantification of bismuth at micromolar levels were constructed by using the charge involved in either the anodic or cathodic peak recoded by cyclic voltammetry that ensued the accumulation of bismuth at the electrode surface. During the anodic scan, the oxidation of metallic bismuth occurred; the cathodic scan involved irreversibly adsorbed bismuth species, which are retained on to the electrode surface. The reproducibility of the proposed UPD-SV procedure (which was within 5 %) was assured by the application to the Pt-MEs of a suitable potential waveform, properly designed to avoid memory effect due to the irreversibly deposited bismuth. The latter phenomenon along with UPD allowed to overcome interference due to copper, which is normally observed when quantification of bismuth is performed by anodic stripping voltammetry at solid electrodes involving bulk metal deposits. The usefulness of the proposed method for the determination of bismuth in real samples was demonstrated by the analysis of a tablet of a pharmaceutical preparation, which is used for curing ulcers.     

Enantiomeric separations by means of nano‐LC

Enantiomers represent a class of compounds extensively investigated since they can show totally different behaviors when they interact with a chiral environment. Because of their identical chemical structure (they differ only in the spatial arrangement of the atoms in the molecule), the separation of optical isomers is a challenging task of analytical chemistry. So far employed methods for the separation of enantiomers are mainly based on chromatography. CE as well was considered as an analytical technique suitable for chiral separations, characterized by high efficiency and low consumption of reagent. Recently, miniaturization was introduced in LC to answer the needs to perform analyses in the minimum time, to use the smallest amount of samples and to reduce environmental pollution. Nano‐LC represents nowadays a valid alternative to the abovementioned conventional analytical techniques, and can be advantageously exploited for enantiomeric separation especially because it needs minute amounts of the chiral material necessary to carry out enantiomeric separations. This review describes the development and applications of nano‐LC in the field of chiral separations. The data reported in literature show its relevance for the study enantiomers‐chiral selectors interaction, as well as for application in pharmaceutical and clinical research.     

Quantification of L‐ergothioneine in whole blood by hydrophilic interaction ultra‐performance liquid chromatography and UV‐detection

A new hydrophilic interaction ultra‐performance LC method was established for the whole blood measurement of L‐ergothioneine. Chromatographic separation was achieved in a fairly short time, less than 4 min, on a 100 × 2.1 mm Acquity UPLC BEH HILIC 1.7 μm column with a mobile phase consisting of a mixture of 100 mmol/L ammonium acetate/ACN/water (5:85:10, v/v/v) that flowed isocratically at 0.250 mL/min. The LOD and the limit of quantification were 3.85 and 11.67 μmol/L, respectively. The method exhibited linearity in a concentration range of 15.63–1000 μmol/L (R² > 0.999). Mean recovery was 96.34% whereas intraassay and interassay precision were 1.52 and 1.82% RSD, respectively. On the whole, the developed method is simple, fast, precise, accurate, and sensitive and may be useful for routine analyses.     

Determination of phenolic compounds and authentication of PDO Lambrusco wines by HPLC-DAD and chemometric techniques

This work proposes a fast and simple method for detection and quantification of phenolic compounds in PDO Lambrusco wines using HPLC-DAD and chemometric techniques. Samples belonging to three different varieties of Lambrusco (Grasparossa, Salamino and Sorbara) were analyzed to provide a methodology appropriate for routine analysis. Given the high complexity of the sample and the coelution among chromatographic peaks, the use of chemometric techniques to extract the information of the individual eluting compounds was needed. Multivariate curve resolution-alternating least squares (MCR-ALS) allowed the resolution of the chromatographic peaks obtained and the use of this information for the quantification of the phenolic analytes in the presence of interferences. Use of multiset analysis and local rank/selectivity information was proven to be crucial for the correct resolution and quantification of compounds. The quantitative data provided by MCR-ALS about the phenolic targets and additional compounds present in the samples analyzed provided wine composition profiles, which were afterwards used to distinguish among wine varieties. Principal component analysis applied to the wine profiles allowed characterizing the wines according to their varieties.     

Identification of Ros Produced by Photodynamic Activity of Chlorophyll/Cyclodextrin Inclusion Complexes

Photodynamic therapy (PDT) is a way of treating malignant tumors and hyperproliferative diseases. It is based on the use of photosensitizer, herein the chlorophyll a (chl a), and a light of an appropriate wavelength. The interaction of the photosensitizer (PS) with the light produces reactive oxygen species (ROS), powerful oxidizing agents, which cause critical damage to the tissue. To solubilize chl a in aqueous solution and to obtain it as monomer, we have used cyclodextrins, carriers which are able to interact with the pigment and form the inclusion complex. The aim of this study is to examine which types of ROS are formed by Chl a/cyclodextrin complexes in phosphate buffered solution and cell culture medium, using specific molecules, called primary acceptors, which react selectively with the reactive species. In fact the changes of the absorption and the emission spectra of these molecules after the illumination of the PS provide information on the specific ROS formation. The ¹O₂ formation has been tested using chemical methods based on the use of Uric Acid (UA), 9,10‐diphenilanthracene (DPA) and Singlet oxygen sensor green (SOSG) and by direct detection of Singlet Oxygen (¹O₂) luminescence decay at 1270 nm. Moreover, 2,7‐dichlorofluorescin and ferricytochrome c (Cyt Fe³⁺) have been used to detect the formation of hydrogen peroxide and superoxide radical anion, which reduces Fe³⁺ of the ferricytochrome to Fe²⁺, respectively.