Determination of heavy metals in real samples by anodic stripping voltammetry with mercury microelectrodes : Part 1. Application to Wine

Differential-pulse anodic stripping voltammetry with a mercury microelectrode is used for the determination of zinc, cadmium, lead and copper in wine at its natural pH without pretreatment. The effects of the matrix on the stripping peaks are studied in detail by varying the concentration of the metals. Intermetallic (CuZn) interferences and the effects of oxygen are described. The results obtained for the labile metal contents varied from 2 μg l^?1 for cadmium to 148 μg l^?1 for zinc; standard addition plots were linear over about two orders of magnitude above these levels, demonstrating the negligible effect of organic matter. Acidification of the sample with hydrochloric acid to pH 1 allowed the total metal contents to be determined. The reliability of the method was tested by comparison with the results obtained with atomic absorption spectrometry; the differences were within 10–20%.     

Identification of Human Dihydroorotate Dehydrogenase Inhibitor by a Pharmacophore-Based Virtual Screening Study

Human dihydroorotate dehydrogenase (hDHODH) is an enzyme belonging to a flavin mononucleotide (FMN)-dependent family involved in de novo pyrimidine biosynthesis, a key biological pathway for highly proliferating cancer cells and pathogens. In fact, hDHODH proved to be a promising therapeutic target for the treatment of acute myelogenous leukemia, multiple myeloma, and viral and bacterial infections; therefore, the identification of novel hDHODH ligands represents a hot topic in medicinal chemistry. In this work, we reported a virtual screening study for the identification of new promising hDHODH inhibitors. A pharmacophore-based approach combined with a consensus docking analysis and molecular dynamics simulations was applied to screen a large database of commercial compounds. The whole virtual screening protocol allowed for the identification of a novel compound that is endowed with promising inhibitory activity against hDHODH and is structurally different from known ligands. These results validated the reliability of the in silico workflow and provided a valuable starting point for hit-to-lead and future lead optimization studies aimed at the development of new potent hDHODH inhibitors.     

Regioselective Hydration of Alkynes by Iron(III) Lewis/Brønsted Catalysis

The triflimide iron(III) salt [Fe(NTf₂)₃] promotes the direct hydration of terminal and internal alkynes with very good Markovnikov regioselectivities and high yields. The enhanced carbophilic Lewis acidity of the Fe^III cation mediated by the weakly‐coordinating triflimide anion is crucial for the catalytic activity. The iron(III) metal salt can be recycled in the form of the OPPh₃/[Fe(NTf₂)₃] system with similar activity and selectivity. However, spectroscopic and kinetic studies show that [Fe(NTf₂)₃] hydrolyzes under the reaction conditions and that catalytically less active Brønsted species are formed, which points to a Lewis/Brønsted co‐catalysis. This triflimide‐based catalytic system is regioselective for the hydration of internal aryl‐alkynes and opens the door to a new synthetic route to alkyl ketophenones. As a proof of concept, the synthesis of two antipsychotics Haloperidol and Melperone, with general butyrophenone‐like structure, is shown.     

Effective medium representation and complex modes in 3D periodic metamaterials made of cubic resonators with large permittivity at mid-infrared frequencies

We review some of the techniques that lead to the effective medium representation of a three-dimensional (3D) periodic metamaterial. We consider a 3D lattice of lead telluride cubic resonators at mid-infrared (MIR) frequencies. Each cubic resonator is modeled with both an electric and a magnetic dipole, through a method called the dual dipole approximation. The electric and magnetic polarizabilities of a cubic resonator are computed via full-wave simulations by mapping the resonator's scattered field under electric/magnetic excitation only to the field radiated by an equivalent electric/magnetic dipole. We then analyze the allowed modes in the lattice, with transverse polarization and complex wavenumber, highlighting the attenuation that each mode experiences after one free space wavelength. We observe the presence of two modes with low attenuation constant, dominant in different frequency ranges, able to propagate inside the lattice: this allows the treatment of the metamaterial as a homogeneous material with effective parameters, evaluated by using various techniques. We then show that the metamaterial under analysis allows for the generation of artificial magnetism (i.e., relative effective permeability different than unity, including negative permeability with low losses) at MIR frequencies.     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Ionic electroactive polymer metal composites: Fabricating,modeling, and applications of postsilicon smart devices

Smart systems adapt to the surrounding environments in a number of ways. They are capable to scavenge energy from available sources, sense and elaborate external stimuli and adequately react. Electro Active Polymers are playing a main role in the realization of smart systems for applications if fields such as bio inspired and autonomous robotics, medicine, and aerospace. This paper focus on the possibility to use Ionic Polymer Metal Composites as a class of materials relevant to the realization of post silicon smart systems. The three main aspects of this new technology, i.e., fabrication methods, modeling, and applications are described with emphasis to most recent results. Attention is given to main challenges and shortcomings to be solved for technology, modelling, and control of IPMC based devices that need to be solved before this new technology can be fully exploited in real world applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013