Thermal and electronic charge transport in bulk nanostructured Zr0.25Hf0.75NiSn composites with full-Heusler inclusions

Bulk Zr_0.25Hf₀₇₅NiSn half-Heusler (HH) nanocomposites containing various mole fractions of full-Heusler (FH) inclusions were prepared by solid state reaction of pre-synthesized HH alloy with elemental Ni at 1073 K. The microstructures of spark plasma sintered specimens of the HH/FH nanocomposites were investigated using transmission electron microscopy and their thermoelectric properties were measured from 300 K to 775 K. The formation of coherent FH inclusions into the HH matrix arises from solid-state Ni diffusion into vacant sites of the HH structure. HH(1–y)/FH(y) composites with mole fraction of FH inclusions below the percolation threshold, y∼0.2, show increased electrical conductivity, reduced Seebeck coefficient and increased total thermal conductivity arising from gradual increase in the carrier concentration for composites. A drastic reduction (∼55%) in κ_l was observed for the composite with y=0.6 and is attributed to enhanced phonon scattering due to mass fluctuations between FH and HH, and high density of HH/FH interfaces.     

Measurement of heterogeneous reaction rates: three strategies for controlling mass transport and their application to indium-mediated allylations

We describe three new strategies for determining heterogeneous reaction rates using photomicroscopy to measure the rate of retreat of metal surfaces: (i) spheres in a stirred solution, (ii) microscopic powder in an unstirred solution, and (iii) spheres on a rotating shaft. The strategies are applied to indium-mediated allylation (IMA), which is a powerful tool for synthetic chemists because of its stereoselectivity, broad applicability, and high yields. The rate-limiting step of IMA, reaction of allyl halides at indium metal surfaces, is shown to be fast, with a minimum value of the heterogeneous rate constant of 1 × 10(-2) cm/s, an order of magnitude faster than the previously determined minimum value. The strategies described here can be applied to any reaction in which the surface is retreating or advancing, thereby broadening the applicability of photomicroscopy to measuring heterogeneous reaction kinetics.     

A new azorellane diterpenoid from Azorella madreporica

A new azorellane diterpenoid has been isolated and identified from the aerial parts of Azorella madreporica Clos. The structure of 1 was established by one- and two-dimensional NMR techniques.     

Adsorption of phenol on supercritically activated carbon fibres: effect of texture and surface chemistry

The influence of texture and surface chemistry on the phenol adsorption capacity of activated carbon fibres (ACFs) was studied. ACFs were prepared by carbonization of a phenolic textile fibre under nitrogen flow, followed by activation with H(2)O and CO(2) (under atmospheric pressure and supercritical state). The materials were characterised by N(2) and CO(2) adsorption, and by temperature programmed desorption studies. A strong correlation between the amount of adsorbed phenol and the micropore volume has been observed. The relationship between surface oxygen concentration and amount of physisorbed and chemisorbed phenol was assessed, and it was shown that higher amounts of surface oxygen groups decreased the phenol chemisorption capacity of ACFs.     

Shades of green in 15th century paintings: combined microanalysis of the materials using synchrotron radiation XRD, FTIR and XRF

A representative selection of green paintings from fifteenth century Catalonia and the Crown of Aragon are analyzed by a combination of synchrotron radiation microanalytical techniques including FTIR, XRD, and XRF. The green pigments themselves are found to be a mixture of copper acetates/basic copper acetates and basic copper chlorides. Nevertheless, a broader range of green shades were obtained by mixing the green pigment with yellow, white, and blue pigments and applied forming a sequence of micrometric layers. Besides the nature of the pigments themselves, degradation and reaction products, such as carboxylates, formates and oxalates were also identified. Some of the copper based compounds, such as the basic copper chloride, may be either part of the original pigment or a weathering product. The high resolution, high brilliance, and small footprint of synchrotron radiation proved to be essential for the analysis of those submillimetric paint layers made of a large variety of compounds heterogeneous in nature and distribution and present in extremely low concentrations.     

Banach Spaces of Solutions of the Helmholtz Equation in the Plane

The purpose of this article is to study the Hilbert space W²\mathcal{ W}^2 consisting of all solutions of the Helmholtz equation Du+u=0\Delta u+u=0 in \BbbR²\Bbb{R}^2 that are the image under the Fourier transform of L²L^2 densities in the unit circle. We characterize this space as a close subspace of the Hilbert space H²\mathcal{ H}^2 of all functions belonging to L²( | x | ^-3dx) L^2( | x | ^{-3}dx) jointly with their angular and radial derivatives, in the complement of the unit disk in \BbbR²\Bbb{R}^2. We calculate the reproducing kernel of W²\mathcal{ W}^2 and study its reproducing properties in the corresponding spaces H^p\mathcal{H}^p, for $p>1$p>1.     

Formal total synthesis of β-pipitzol

(±)-$\text{O}$-methylperezone ($\text{1b}$) was obtained by selective oxidative demethylation of (±)-leucoperezone trimethyl ether ($\text{4a}$). Compound ($\text{4a}$) was prepared by condensation of 2,3,5-trimethoxytoluene ($\text{5e}$) with 6-methyl-5-hepten-2-one, followed by reductive removal of the tertiary alcohol. The aromatic precursor $\text{5e}$ was prepared in four steps from 2,3-dimethoxytoluene ($\text{5a}$) and, alternatively, in three steps from 5-bromoveratraldehyde ($\text{6a}$). Racemic $\text{1b}$ and $\text{4a}$ were directly compared with the optically active molecules prepared from natural R(-)-perezone ($\text{1a}$).     

New Efficient Synthesis of Methyl Trans-2-Aryl (or Hetaryl)-1-Benzamidocyclopropancarboxylates

Methyl trans-2-aryl(or hetaryl)-1-benzamidocyclopropancarboxylates can be easily obtained by thermal decomposition of trans-4-aryl(or hetaryl)-3-benzamido-3-carbomethoxy-Δ¹-pyrazolines synthesized by 1,3-dipolar cycloaddition of diazomethane with methyl E-3-aryl(or hetaryl)-2-benzamido-2-propenoates.     

Predicting the Capillary Imbibition of Porous Rocks from Microstructure

The kinetics of capillary imbibition into porous rocks is studied experimentally and theoretically. The Washburn law is modified by introducing various corrections relating to the microstructure of the rocks, such as tortuosity, pore shape (obtained experimentally), and applying the effective medium approximation (EMA) in order to calculate the effective radius that defines the hydraulic conductance and the topology of the capillary imbibition. The application of the EMA shows that capillary imbibition is mainly produced in 1-D, and the pore structure is constituted by different pore throats in series, linked by chamber pores. The capillary process has been discussed as a function of their petrography and pore structure. Our study of the Washburn equation and the addition of correction factors for the pore structure allows a very accurate prediction of the weight rate.