Validated, non-destructive and environmentally friendly determination of cocaine in euro bank notes

A non-destructive, fast and environmentally friendly procedure has been developed for cocaine determination in euro bank notes. Cocaine was extracted with 15 ml methanol by vortex agitation during 5 min. The extract was evaporated and reconstituted in 0.5 ml methanol. GC-MS-MS analysis was performed using as precursor ion m/z 182.2, with an excitation energy voltage of 1.60 eV, being the product ions measured m/z 150.2 and 82.0. A limit of detection of 0.15 ng per note and a repeatability of 6%, established from the relative standard deviation, of a 1 ng ml(-1) level, were achieved. Recoveries of 101+/-2 and 98+/-3% were obtained for samples spiked with 100 and 10 microg respectively. Results show that all the euro bank notes measured (16 samples) were contaminated with cocaine in the range between 1.25 and 889 microg. Two different contamination levels, high level (150-889 microg) and low one (1.25-77 microg) were found and it could be related with the direct or indirect contact with the drug.     

Chemistry of the phenoxathiins and isosterically related heterocycles. XXXI. Synthesis of the 1,3-diazaphenoxathiin ring system and the relationship of the 13C-NMR chemical shift of the C-10a resonances to the molecular dihedral angle determined by X-Ray diffraction: A further investigation

Synthesis of the 1,3-diazaphenoxathiin ring system and the confirmation of its structure by ¹³C-nmr spectroscopy and X-ray crystallography are reported. Implications of the ¹³C-nmr chemical shift of the C-10a resonance and its relationship to the molecular dihedral angle are presented. The molecule crystallizes in the Pbca space group and was found to have a dihedral angle of 165.5(9)°, the structure refining to a final R-factor of T = 0.0427.     

Donnan equilibrium of ionic drugs in pH-dependent fixed charge membranes: theoretical modeling

We have studied theoretically the partition equilibrium of a cationic drug between an electrolyte solution and a membrane with pH-dependent fixed charges using an extended Donnan formalism. The aqueous solution within the fixed charge membrane is assumed to be in equilibrium with an external aqueous solution containing six ionic species: the cationic drug (DH(+)), the salt cations (Na(+) and Ca(2+)), the salt anion (Cl(-)), and the hydrogen and hydroxide ions. In addition to these mobile species, the membrane solution may also contain four fixed species attached to the membrane chains: strongly acid sulfonic groups (SO(3)(-)), weakly acid carboxylic groups in dissociated (COO(-)) and neutral (COOH) forms, and positively charged groups (COO...Ca(+)) resulting from Ca(2+) binding to dissociated weakly acid groups. The ionization state of the weak electrolyte groups attached to the membrane chains is analyzed as a function of the local pH, salt concentration, and drug concentration in the membrane solution, and particular attention is paid to the effects of the Ca(2+) binding to the negatively charged membrane fixed groups. The lipophilicity of the drug is simulated by the chemical partition coefficient between the membrane and external solutions giving the tendency of the drug to enter the membrane solution due to hydrophobic interactions. Comparison of the theoretical results with available experimental data allows us to explain qualitatively the effects that the pH, salt concentration, drug concentration, membrane fixed charge concentration, and Ca(2+) binding exert on the ionic drug equilibrium. The role of the interfacial (Donnan) electric potential difference between the membrane and the external solutions on this ionic drug equilibrium is emphasized throughout the paper.     

Selection of a Representative Matrix for Calibration in Multianalyte Determination of Pesticides in Vegetables by Liquid Chromatography-Electrospray Tandem Mass Spectrometry

An analytical method for determining residues of twenty pesticides by liquid chromatography (LC) coupled to electrospray ionisation (ESI) tandem mass spectrometry (MS-MS) in eight commodities, cucumber, tomato, pepper, green bean, eggplant, zucchini, melon and watermelon, has been developed and validated. On one hand, calibration curves prepared in solvent were compared with calibration curves prepared in a blank matrix extract of each target matrix. On the other hand, calibration curves and recoveries for each commodity were compared. Cucumber was selected as potential reference matrix for the target vegetables.     

Target-templated de novo design of macrocyclic d-/l-peptides: discovery of drug-like inhibitors of PD-1

Peptides are a rapidly growing class of therapeutics with various advantages over traditional small molecules, especially for targeting difficult protein–protein interactions. However, current structure-based methods are largely limited to natural peptides and are not suitable for designing bioactive cyclic topologies that go beyond natural l-amino acids. Here, we report a generalizable framework that exploits the computational power of Rosetta, in terms of large-scale backbone sampling, side-chain composition and energy scoring, to design heterochiral cyclic peptides that bind to a protein surface of interest. To showcase the applicability of our approach, we developed two new inhibitors (PD-i3 and PD-i6) of programmed cell death 1 (PD-1), a key immune checkpoint in oncology. A comprehensive biophysical evaluation was performed to assess their binding to PD-1 as well as their blocking effect on the endogenous PD-1/PD-L1 interaction. Finally, NMR elucidation of their in-solution structures confirmed our de novo design approach.

In silico design of heterochiral cyclic peptides that bind to a specific surface patch on the target protein (PD-1, in this case) and disrupt protein–protein interactions.     

Influence of the heating rate on the temperature profiles and on the conversion rate of powdery cellulose and pine sawdust

An experimental study of the thermal decomposition of powdered cellulose and pine sawdust has been performed. The influence of the heating rate on the temperature profiles in the sample and on the solid conversion rate has been studied. A mathematical model without adjustable parameters has been used to calculate the temperature at different points in the solid bed and the average total solid conversion. The experimental results have been compared with those calculated by the model. A good agreement has been obtained for sawdust. Some differences are observed for cellulose at high heating rates, and the influence of the thermal conductivity and the reaction heat on the results has been analysed.     

Monitoring multi-class pesticide residues in fresh fruits and vegetables by liquid chromatography with tandem mass spectrometry

A new analytical method was developed using liquid chromatography with tandem mass spectrometry for the routine analysis of 31 multi-class pesticide residues and applied to approximately 50 fresh fruit and vegetable samples (green bean, cucumber, pepper, tomato, eggplant, watermelon, melon and zucchini). Extraction of the pesticides with ethyl acetate was carried out. The optimal ionisation conditions were selected for each pesticide in the same run. The procedure was validated and the values of some merit figures, such as recovery, precision, linear range, detection limit and quantification limit for each pesticide were calculated together with its calculated expanded uncertainty (U). The average recoveries in cucumber obtained for each pesticide ranged between 74 and 105% at two different fortification levels (n = 10 each) that ranged between 9 and 250 ng g(-1) (depending on the pesticide). The uncertainty associated to the analytical method was lower than 23% for all compounds tested. The calculated limits of detection and quantitation were typically <1 ng g(-1) that were much lower than the maximum residue levels established by European legislation.     

Skin Necrosis due to Photodynamic Action of Benzoporphyrin Depends on Circulating Rather than Tissue Drug Levels: Implications for Control of Photodynamic Therapy

In an ideal world, photodynamic therapy (PDT) of abnormal tissue would reliably spare the surrounding normal tissue. Normal tissue responses set the limits for light and drug dosimetry. The threshold fluence for necrosis (TFN) was measured in normal skin following intravenous infusion with a photosensitizer, benzoporphyrin derivative monoacid ring A (BPD-MA) Verteporfin as a function of drug dose (0.25-2.0 mg/kg), wavelength of irradiation (458 and 690 nm) and time interval (0–5h) between drug administration and irradiation. The BPD-MA levels were measured in plasma and skin tissue to elucidate the relationship between TFN, drug kinetics and biodistribution. The PDT response of normal skin was highly reproducible. The TFN for 458 and 690 nm wavelengths was nearly identical and the estimated quantum efficiency for skin response was equal at these two wavelengths. Skin phototoxicity, quantified in terms of 1/ TFN, closely correlated with the plasma pharmacokinetics rather than the tissue pharmacokinetics and was quadratically dependent on the plasma drug concentration regardless of the administered drug dose or time interval between drug and light exposure. This study strongly suggests that noninvasive measurements of the circulating drug level at the time of light treatment will be important for setting optimal light dosimetry for PDT with liposomal BPD-MA, a vascular photosensitizer.     

Application of Graphite-Epoxy Composite Electrodes in Differential Pulse Anodic Stripping Voltammetry of Heavy Metals

An analytical study on the use of graphite-epoxy composite (GEC) electrodes for differential pulse anodic stripping voltammetry (DPASV) of heavy metals is presented. This study is accompanied by microscopic observations of the electrode surface before and after the stripping step in comparison to glassy carbon electrode. GEC electrodes show much better accumulation properties and consequently acceptable behaviour which makes them suitable as working electrodes in the DPASV of heavy metals. Lead determination in real water samples in a batch system as well as some preliminary results in a flow-through system are presented. The detection limits in batch measurements were 100ppb for Cd, 10pb for lead and 50ppb for copper. The detection limit for lead in the flow-through system was similar to that in the batch. The results obtained show that these low cost and easy to prepare materials can be of interest in future research concerning stripping techniques of heavy metals and other analytes.     

Persistent (amino)(silyl)carbenes

(Amino)(silyl)carbenes, prepared by substitution reactions at a carbene center, can survive several days at 0 degrees C. These species are not push-pull carbenes as their phosphino analogues and therefore are excellent ligands for transition-metal centers.