Secondary ion mass spectrometry and alpha-spectrometry of electrodeposited thorium films

The main aim of this work was the preparation of samples with thorium content on the steel discs by electrodeposition for determination of natural thorium isotope by alpha spectrometry and secondary ion mass spectrometry and finding out their possible linear correlation between these methods. The analysis of the composition of surface was other aim of study. Discs were measured by alpha spectrometer. After that, alpha spectrometry discs were analyzed by TOF-SIMS IV, which is installed in the International Laser Centre in Bratislava. The integral and normalized intensities of isotope of ²³²Th and intensities of ions of ThO⁺, ThOH⁺, ThO₂H⁺, Th₂O₄H⁺, ThO₂ ^?, ThO₃H^?, ThH₃O₃ ^? a ThN₂O₅H^? were measured. The linear correlation is between surface’s weights of Th and intensities of ions of Th⁺ from identified in SIMS spectra. We found out the chemical binding between thorium and oxygen and hydrogen on the surface of samples by SIMS method. Obtained intensities of ions ²³²ThO⁺, ²³²ThOH⁺, ²³²ThO₂H⁺ prove the presence of oxidized forms of thorium in the upper layers of surface. The oxidized ions predominate in univalent form of thorium up to deep about 3,000 nm.     

Synthesis and study of new rod-like mesogens containing 2-aminothiophene unit

We present a synthesis and mesomorphic properties of a new series of rod-like mesogens. All the compounds possess a substituted 2-aminothiophene unit as a main element in the structure attached to a stilbene moiety with a terminal alkyloxy chain (OR¹, OR² where R¹=C_nH_2n+1, R²=C_mH_2m+1; n, m ranging from 6 to 12). The synthesis of alkyloxybiphenyl substituted 2-aminothiophenes was carried out by the Gewald reaction and the appropriate reaction conditions were investigated. The liquid–crystalline properties were studied via polarizing optical microscopy, differential scanning calorimetry and X-ray diffraction. These materials exhibit nematic and/or smectic A phases. The influence of structural changes (variation in alkyloxy chain length and symmetry of the molecule) on mesogenic behaviour is discussed. Evaluation of UV–vis, fluorescent and electrochemical properties are also included.     

3‐Methyl 5‐isopropyl 2‐methoxy­imino­methyl‐6‐methyl‐4‐(3‐nitro­phenyl)‐1,4‐di­hydro­pyridine‐3,5‐di­carboxyl­ate

The crystal structure of the title compound, C₂₀H₂₃N₃O₇, consists of relatively isolated mol­ecules. The substituted 1,4‐di­hydro­pyridine ring adopts a flattened boat conformation. Both ester groups, at positions 3 and 5, have cis,cis geometry. The phenyl ring is nearly planar and is approximately perpendicular to the 1,4‐di­hydro­pyridine ring (dihedral angle 87.70°).     

On expectation value calculations of one-electron properties using the coupled cluster wave functions

The ability of various approximate coupled cluster (CC) methods to provide accurate first-order one-electron properties calculated as expectation values is theoretically analysed and computationally examined for BH and CO. For actual calculations the infinite number of terms of the expectation value expansion (O=¦exp (T ⁺)O exp (T)¦_c) was truncated so that T ₁ T ₂, T ₃, and (1/2) T ₂T₂ clusters were retained on both sides of O. The role of individual clusters is carefully discussed. Inclusion of T ₁, is unavoidable, but if triples are essential in the energy evaluation, they may play an even more important role in the property expansion, as shown in the case of CO. It is shown that the CC wave function, which is exact to second order, effectively satisfies the Hellmann-Feynman theorem.     

The triple fluorescence of benzanilide and the dielectric medium modulation of its competitive excitation

The fluorescence of the benzanilide molecule at 298 K is inferred to consist of three independent electronic transitions associated with the single ground-state molecular species. F₁ (λ_max340 nm), the normal fluorescence is observed weakly and is ascribed to an n,π*,-π,π* mixed state. F′₂ is ascribed to the proton-transfer imidol tautomer fluorescence (previously reported) with unresolved λ_max (inferred at ≈460 nm). F″₂ is ascribed to a charge-transfer state fluorescence to the ground state, and occurs as a resolved CT transition in tetrahydrofuran at λ_max 520 nm. Comparison of the spectra of N-methylbenzanilide exhibiting only F₁ and F″₂ (CT) permitted the analysis of the benzanilide spectra.     

Application of umbelliferone molecularly imprinted polymer in analysis of plant samples

The molecularly imprinted polymers (MIPs) were synthesised and the influence of the type of porogen, the nature of sample solvent, and the binding capacity of material were tested by high-performance liquid chromatography (HPLC). Umbelliferone was used as the template for imprint formation. Methacrylic acid was used as the monomer and acetonitrile, ethanol, and chloroform as porogen. Non-imprinted polymers (NIPs) were prepared by the same procedure. The highest value of the specific binding capacity (269 μg of umbelliferone per 100 mg of polymer) was obtained for polymers prepared in chloroform as porogen and methanol/water (φ _r = 1: 1) as the sample solvent. The group-selective MIP was used as sorbent for the SPE pre-treatment of umbelliferone from plant extracts prior to HPLC analysis. Analysis of the spiked samples showed good recoveries (> 77 %). The limit of detection, limit of determination, and repeatability of the method were also calculated.     

The preparation of background electrolytes in capillary zone electrophoresis: golden rules and pitfalls

In this article the methodology of the design of suitable background electrolytes (BGEs) in capillary zone electrophoresis (CZE) is described. The principal aspects of the role of a BGE in CZE are discussed with respect to an appropiate migration behavior of analytes, including the transport of the electric current, the buffering of pH, the Joule heat, the electro-endosmotic flow (EOF) and the principal migration and detection modes. The impact of the composition of the BGE upon migration and detection is discussed. It is shown that the total concentration of the BGE is a principal factor and the adjustment of migrating analyte zones according to the Kohlrausch regulating function (KRF) is the principal effect in most of the sample stacking techniques. The number of co-ions and their properties are of key importance for peak shapes of the analyte peaks and for the existence of system zones. The detection of UV-transparent analytes may advanteously be done in the indirect UV mode, by using UV-absorbing co-ions, however, both peaks and dips may be expected in the UV trace in case of multiple co-ionic BGEs. Properties of BGEs can be predicted applying mathematical models and it is shown that with SystCharts, predictions can be given concerning the existence of system zones, detection modes and the peak shapes of analytes for a given BGE. Practical examples of methodological considerations are given in the design of suitable BGEs for four principal combinations of migration and detection modes. The properties of the BGEs selected are exemplified with experimental results. Golden rules are summarized for the preparation of suitable BGEs in CZE.     

Stereoselective total synthesis of protected sulfamisterin and its analogues

The stereoselective synthesis of sulfamisterin I and its unnatural analogues II and V in their protected form was achieved through a common strategy. The Wittig reaction of aldehydes VIII and IX with the C₁₄ hydrophobic side-chain X served as the key C-C connecting transformation. Subsequent functional group inter-conversions in the coupling products XI and XX completed the total synthesis.     

The preparation of the 239Np tracer from 243Am and the purification of the stock solution

The present work describes preparation of ²³⁹Np tracer from ²⁴³Am stock solution and the purification of this solution from ferric cation. The method of the preparation of tracer involves stabilization of Np(IV) by ascorbic acid and ferric nitrate, separation of ²³⁹Np from ²⁴³Am by extraction chromatography and determination of recoveries of ²³⁹Np by means of gamma spectroscopy. We used the commercially available sorbents TEVA^®Resin for the ²³⁹Np preparation and DGA Resin for ²⁴³Am purification. All sorbents were purchased from Eichrom Industries, Inc. The first eluate from the column can be stored for a future preparation of the tracer and fraction with ²³⁹Np will be used to monitor radiochemical yield of ²³⁷Np.     

Superbeads: immobilization in "sweet" chemistry

Enzymatic oligosaccharide synthesis using recombinant glycosyltransferases is able to overcome the difficulties associated with chemical methods. Nonetheless, sugar nucleotide regeneration cycles are necessary for the glycosylation. The multistep enzyme reaction can be efficiently carried out on superbeads that are prepared by immobilizing multienzyme mixtures on bead support through fused binding domains.