Effect of spark discharges on the trajectories of insulating particles in roll-type corona-electrostatic separators. Experimental and numerical study

Corona-electrostatic separation is a multi-variable process that has been thoroughly studied in connection with its various applications in the recycling industry. The aim of the present paper is to point out one parasitic phenomenon that adversely affects the efficiency of the separation: the sparks generated at the passage of conductive particles through the electric field zone. The experiments were carried out on a laboratory roll-type corona electrostatic separators, and the sparks were generated by introducing 16 calibrated copper pins in 40-g samples of granular insulating material (PVC; typical granule size: 1.5 mm) that were fed at a constant rate onto the surface of the grounded rotating roll electrode. The distribution of the PVC granules in the 14 boxes of the collector was altered by the occurrence of the spark discharges, as they were accompanied by the annealing of the electric field between the electrodes. The numerical simulation of insulating granules charging and movement under the action of the electric field enabled a better understanding of the interactions between the spark discharges and the other factors that influence their trajectories and affect the efficiency of the separation: roll-speed, particle size and ambient humidity. The particle dynamics equations were solved using an iterative scheme by using the electric field calculated in any point with the commercial software TRICOMP. The good agreement between the predictions made by these simulations and the experimental findings confirms the ability of the mathematical model to reflect the complexity of the physical phenomena.     

Bidentate Boron Lewis Acids: Selectivity in Host–Guest Complex Formation

Bidentate boron Lewis acids based on 1,8‐diethynylanthracene were synthesised in two steps by initial stannylation of the terminal alkynes and subsequent tin–boron exchange with different chloroboranes. The reactions were very selective, and the target compounds were obtained in high purity and good to excellent yields. Complexation experiments of 1,8‐bis[(diphenylboranyl)ethynyl]anthracene with nitrogen bases (pyridine, pyrimidine, TMEDA) afforded three stable adducts, which were structurally characterised by X‐ray diffraction. Competition experiments demonstrated the selective exchange of guests, and quantum‐chemical calculations provided information on their energetics. NMR experiments at low temperature gave insight into the dynamic behaviour of the TMEDA adduct.     

Facile one-pot synthesis,butyrylcholinesterase and α-glucosidase inhibitory activities,structure–activity relationship,molecular docking and DNA–drug binding analysis of Meldrum’s acid derivatives

Research on Chemical Intermediates - Meldrum’s acid derivatives were facile synthesized by one-pot condensation process and characterized by NMR (1H, 13C, DEPT-90 and DEPT-135) and EI-MS. The...     

Assessment of the nature of interactions of cations with cycloheptatriene derivatives using change in the aromaticity: Comparison with electron density and NBO results

ABSTRACT

Interactions of cycloheptatriene derivatives, C₇H₆X, (X?=?NH, PH, AsH, O, S, Se) with the cations H⁺, CH₃⁺, Cu⁺, Al⁺, Li⁺, Na⁺, and K⁺ are studied using B3LYP functional and 6-311++G(d,p) basis set. The calculated gas-phase cation affinities (CA) and cation basicities (CB) for all molecules decrease as H⁺ > CH₃⁺ > Cu⁺ > Al⁺ > Li⁺ > Na⁺ > K⁺. We used the induced aromaticity in the 7-membered ring of C₇H₆X upon interaction with the cations, M⁺, as a measure of C₇H₆X/M⁺ interaction. Nucleus-independent chemical shift (NICS) and harmonic oscillator model of aromaticity (HOMA) were used as two indices of aromaticity. The highest and lowest induced aromaticities were observed for interactions of H⁺ and K⁺, respectively. Also, the aromaticity induced by interaction with a cation in C₇H₆AsH and C₇H₆PH was larger than that in C₇H₆NH and C₇H₆O. Hence, the aromaticity was considered as a measure of covalency for the C₇H₆X/M⁺ interactions showing a rational dependence on both the molecule and cation. The nature of the interactions was also assessed using electron density, charge distribution analysis and NBO calculations. The results of the aromaticity indices, NICS and HOMA, were compared with the electron density and NBO results.     

An eco-friendly multi-analyte high-performance thin layer chromatographic densitometric determination of amoxicillin,metronidazole, and famotidine in their ternary mixtures and simulated gastric juice: A promising protocol for eradicating Helicobacter pylori

Gastrointestinal tract disorders constitute a heavy burden to healthcare providers. To eradicate Helicobacter pylori infection, different triple therapy protocols have been proposed. Among which are combinations of proton pump inhibitors (e.g., omeprazole), histamine-2 receptor antagonists (e.g., famotidine), along with antibiotics (e.g., amoxicillin). In this work, a sensitive and accurate high-performance thin-layer chromatographic method was developed for the simultaneous determination of amoxicillin, metronidazole, and famotidine in bulk powder and laboratory-prepared combined-tablet mixtures. Complete separation of the cited compounds was achieved using pre-coated silica gel plates with a mixture of methanol:chloroform:toluene:water:glacial acetic acid (5:2:1.5:0.5:0.1 v/v/v/v/v) as the mobile phase. The method was fully validated as per the international conference of harmonization guidelines. Good linearity, a correlation coefficient of 0.9991, was obtained in the concentration ranges 0.1–1.6 μg/band (amoxicillin), 0.1–0.9 μg/band (metronidazole), and 0.1–0.9 μg/band (famotidine). Since the method allowed the determination of the three compounds in combined tablets with a high degree of selectivity, accuracy, precision, with cost-effectiveness, it could be used for regular quality control. Moreover, the applicability of the proposed method was extended to the determination of the ternary mixture in simulated gastric juice. Method greenness was assessed using different green metrics.     

Sulfonic acid–functionalized magnetic Fe3-xTixO4 nanoparticles: New recyclable heterogeneous catalyst for one-pot synthesis of tetrahydrobenzo[b]pyrans and dihydropyrano[2,3-c]pyrazole derivatives

In this work, titanomagnetite nanoparticles (Fe_3-xTi_xO₄) have been used as a novel suppport for the synthesis of a magnetic acidic catalyst. These nanoparticles were functionalized with sulfonic acid groups to prepare the Fe_3-xTi_xO₄@SO₃H nanoparticles. The synthesized acidic nanoparticles have been explored as new and efficient recyclable heterogeneous catalyst for a one-pot, three-component synthesis of tetrahydrobenzo[b]pyrans known as 4H-chromenes and 1,4-dihydropyrano[2,3-c]pyrazoles. The structure of the catalyst was established by infrared, energy dispersive x-ray (EDX), and scanning electron microscopy analyses. The reactions proceed smoothly to furnish the respective products in excellent yields and short reaction times. The facile reaction conditions, easy isolation of the products, versatility, and easy magnetic separation and reusability of the catalyst with no significant loss of activity are the main merits of the present method.     

Ab initio molecular dynamics simulation of ionic liquids

Ab initio Car-Parinnello molecular dynamics is used to simulate the structure and the dynamics of 1-butyl-3-methylimidazolium iodide ([bmim]I) ionic liquid at 300 K. Site-site pair correlation functions reveal that the anion has a strong interaction with any three C-H's of the imidazolium ring. The ring bends over and wraps around the anion such that the two nitrogen atoms take a distance to the anion. Electron donating butyl group contributes the electronic polarization in addition to geometrical (out-of-plane) polarization of the ring due to the liquid environment. This facilitates bending of the ring along the axis passing through nitrogen atoms. The average bending angle depends largely on the alkyl chain length and slightly on the anion type. Redistribution of electron density over the ring caused by the electron donating alkyl group provides additional independent evidence to the instability of lattice structure, hence the low melting point of the ionic liquid. Simulated viscosity and diffusion coefficients of [bmim]I are in quite agreement with the experiments.