基于灰度共生矩阵与反向投影的织物疵点检测

针对织物疵点检测,将灰度共生矩阵（Gray-level Co-occurrence Matrix,GLCM）与反向投影结合起来,提出了一种基于GLCM的反向投影方法（GLCM-BP）。首先介绍了GLCM-BP的原理,然后给出了织物疵点检测流程,分析并优化了GLCM的距离d与灰度级N等参数,选择了相应的滤波与自适应阈值分割方法以检测疵点,同时给出了7种常见疵点的检测结果。最后将本文方法与GLCM方法作了检出率的比较。结果表明,提出的方法具有良好的疵点分割效果,可显著提高疵点检出率。     

Identification of sites within a monomeric red fluorescent protein that tolerate peptide insertion and testing of corresponding circular permutations

In recent years the class of known fluorescent proteins (FPs) has dramatically expanded as an ever-increasing numbers of variants and homologs of the green fluorescent protein (GFP) from Aequorea jellyfish have been either engineered in the lab or discovered in other marine organisms. The red fluorescent protein (RFP) from Discosoma coral (also known as dsFP583 and DsRed) has proven to be a particularly fruitful progenitor of variants with biochemical and spectroscopic properties conducive to applications in live cell imaging. We have investigated the tolerance of an engineered monomeric descendent of Discosoma RFP, known as mCherry, towards peptide insertion and circular permutation. Starting from a random library of insertion variants, we identified six genetically distinct sites localized in three different loops where a sequence of five residues could be inserted without abolishing the ability of the protein to form its intrinsic red fluorescent chromophore. For each of these insertion variants, a corresponding circular permutation variant was created in which the original N- and C-termini were connected by a six-residue linker and new termini were introduced at the site of the insertion. All six circular permutation variants had significantly diminished brightness relative to the analogous insertion variants. The most promising circular permutation variant has termini at the position corresponding to residue 184 of mCherry and retains 37% of the intrinsic fluorescent brightness of mCherry. These circularly permuted variants may serve as the foundation for construction of genetically encoded Ca2+ sensors analogous to the previously reported camgaroo, pericam and G-CaMP sensors based on variants of Aequorea GFP.     

Structures of the chromophore binding sites in BLUF domains as studied by molecular dynamics and quantum chemical calculations

BLUF (blue-light sensing using FAD) domains constitute a new family of flavin-based blue light photoreceptors. The photocycle of BLUF is unique in the sense that a few hydrogen bond rearrangements are accompanied by only slight structural changes in the bound chromophore. The hydrogen bond rearrangements upon illumination have been inferred from spectral changes in the chromophore: approximately 10 nm redshift of the absorption maximum and approximately 16 cm(-1) downshift of the C4=O stretching frequency. However, the exact features of the hydrogen bond network around the active site are still the subject of some controversy. In particular, the orientation of a conserved Gln (Gln63 in AppA) is presently one of the most questioned topics in the field. Here we perform molecular dynamics simulations for the wild-type AppA, AppA1-124C20S, BlrB and T110078 and furthermore quantum chemical calculations to investigate their spectroscopic properties in the dark and signaling states. On the basis of these results, we reveal the dynamic aspect of hydrogen bonding networks at the active site and propose theoretically reasonable models for the dark and signaling states of the BLUF domains.     

A novel transformation of 1-exo-substituted 2a-aroyl-1,2,2a,8b-tetrahydro-3H-benzo[b]cyclobuta[d]pyran-3-ones with sulfoxonium ylide to highly strained 2a-(1-arylethenyl)-1,2,2a,7b-tetrahydrocyclobuta[b]benzofurans

When 1-substituted 2a-aroyl-1,2,2a,8b-tetrahydro-3H-benzo[b]cyclobuta[d]pyran-3-ones (1) were treated with dimethylsulfoxonium methylide, 1-endo isomers (endo-1) gave 1-substituted 3-aroyl-1,2,4a,9b-tetrahydrodibenzofuran-4-ols (2) exclusively as expected. On the other hand, 1-exo isomers (exo-1) underwent a novel transformation to 1-substituted 2a-(1-arylethenyl)-1,2,2a,7b-tetrahydrocyclobuta[b]benzofurans (3), together with 2.     

Current state for the development of metallopharmaceutics and anti-diabetic metal complexes

This tutorial review introduces the current state of metallopharmaceutics development by focusing on the topics of anti-diabetic vanadium and zinc complexes. Over thousands of years, people have produced many types of inorganic compounds, and the modern concept of chemotherapy was achieved by Ehrlich, who used an arsenic-containing compound to treat syphilis. Since then, many metallopharmaceutics have been developed worldwide. This review will be helpful to researchers who are interested in the current states of not only metallopharmaceutics but also anti-diabetic metal complexes.     

Composite membranes prepared from glutaraldehyde cross-linked sulfonated cardo polyetherketone and its blends for the dehydration of acetic acid by pervaporation

Cardo polyetherketone (PEK-C) composite membranes were prepared by casting glutaraldehyde (GA) cross-linked sulfonated cardo polyetherketone (SPEK-C) or silicotungstic acid (STA) filled SPEK-C and poly(vinyl alcohol) (PVA) blending onto a PEK-C substrate. The compatibility between the active layer and PEK-C substrate is improved by immersing the PEK-C substrate in a GA cross-linked sodium alginate (NaAlg) solution and using water–dimethyl sulfoxide (DMSO) as a co-solvent for preparing the STA-PVA-SPEK-C/GA active layer. The pervaporation (PV) dehydration of acetic acid shows that permeation flux decreased and separation factor increased with increasing GA content in the homogeneous membranes. The permeation flux achieved a minimum and the separation factor a maximum when the GA content increased to a certain amount. Thereafter the permeation flux increased and the separation factor decreased with further increasing the GA content. The PV performance of the composite membranes is superior to that of the homogeneous membranes when the feed water content is below 25 wt%. The permeation activation energy of the composite membranes is lower than that of the homogeneous membranes in the PV dehydration of 10 wt% water in acetic acid. The STA-PVA-SPEK-C-GA/PEK-C composite membrane using water–DMSO as co-solvent has an excellent separation performance with a flux of 592 g m⁻² h⁻¹ and a separation factor of 91.2 at a feed water content of 10 wt% at 50 °C.     

Colloidal nanoparticles of a europium complex with enhanced luminescent properties

We report an alternative approach, that is, forming Eu(tta)3dpbt (dpbt = 2-( N, N-diethylanilin-4-yl)-4,6-bis(3,5-dimethylpyrazol-1-yl)-1,3,5-triazine, tta = thenoyltrifluoroacetonato) nanoparticles in water/methanol mixtures, to satisfy the combined requirements of good dispersibility in water solutions and efficient long-wavelength sensitization for Eu (III) complexes to be used in biological applications. The size of Eu(tta)3dpbt colloidal particles with very high luminescent capabilities can be modulated to some extent by changing the preparation conditions. The optical excitation window for the Eu (III) luminescence of Eu(tta)3dpbt nanoparticles, extending up to 475 nm, is wider than that of Eu(tta)3dpbt molecules dissolved in toluene. This is the first example for obviously extending the sensitization window of luminescent lanthanide materials to the long-wavelength region by forming nanoparticles of a lanthanide complex. Quantum yields of Eu (III) luminescence of the prepared Eu(tta)3dpbt colloidal particles, with an average diameter of 33.1 nm, are 0.27, 0.27, 0.24, 0.19, 0.14, and 0.01 upon excitation at 402, 420, 430, 440, 450, and 475 nm, respectively. The Eu(tta)3dpbt nanoparticles exhibited excellent two-photon sensitization performance with a highest delta Phi value of 3.2 x 10(5) GM (1 GM = 10(-50) cm4 s photo(-1) particle(-1)) at the excitation wavelength of 832 nm, which is about 7 times higher than the highest value reported for the CdSe/ZnS core-shell quantum dots. The favorable luminescent properties and the good dispersibility in water solutions of the Eu(tta)3dpbt nanoparticles are very promising for the development of new luminescent nanoprobes for bioanalysis.     

Self-assembly of amphiphilic alkyloligosiloxanes within cylindrically and spherically confined spaces

The self-assembly of amphiphilic alkyloligosiloxane molecules within cylindrically and spherically confined spaces has been investigated. Hydrolyzed solutions of the precursors consisting of an alkylsiloxane core and three branching trimethoxysilyl groups (C n H 2 n+1 Si(OSi(OMe) 3) 3, n = 10 and 16) were impregnated into the cylindrical pores of porous anodic alumina membranes (PAAMs), leading to the formation of rod- and tubelike hybrids. A two-dimensional (2D) hexagonal mesostructure with a circular orientation and a lamellar mesostructure with a multitubular orientation were confirmed for n = 10 and 16, respectively. The pore diameters of PAAMs ranging from 30 to 400 nm did not significantly affect the mesostructures of the hybrids. The self-assembly in the spherical droplets was also performed by spray-drying of the hydrolyzed solutions. At high temperature, vesicular lamellar mesostructures were formed, independent of the alkyl chain length of the precursors ( n = 10 or 16). Spherical hybrids with a core-shell structure (a 2D hexagonal core and a lamellar shell) were also prepared by lowering the drying temperature in the case of n = 10. These are the first findings on the confined assembly of single siloxane-based amphiphiles that will lead to the fabrication of novel hierarchically ordered hybrid materials having Si-C covalent bonds at the interfaces.     

Environmentally friendly synthesis of highly monodisperse biocompatible gold nanoparticles with urchin-like shape

We report a facile and environmentally friendly strategy for high-yield synthesis of highly monodisperse gold nanoparticles with urchin-like shape. A simple protein, gelatin, was first used for the control over shape and orientation of the gold nanoparticles. These nanoparticles, ready to use for biological systems, are promising in the optical imaging-based disease diagnostics and therapy because of their tunable surface plasmon resonance (SPR) and excellent surface-enhanced Raman scattering (SERS) activity.     

TDDFT Study of the Electronic Structure,Absorption and Emission Spectra of the Light Emitters of the Amazing Firefly Bioluminescence and Solvation Effects on the Spectra

The ground and excited state properties of luciferin (LH₂) and oxyluciferin (OxyLH₂), the bioluminescent chemicals in the firefly, have been characterized using density functional theory (DFT) and time dependent DFT (TDDFT) methods. The effects of solvation on the electronic absorption and emission spectra of luciferin and oxyluciferin were predicted with a self‐consistent isodensity polarized continuum model of the solvent using TDDFT. The S₀→S₁ vertical excitation energies in the gas phase and in water were obtained. Optimizations of the excited state geometries permitted the first predictions of the fluorescence spectra for these biologically important molecules. Shifts in both of the absorption and emission spectra on proceeding from the gas phase to aqueous solution were also predicted.