SERS and FT-IR studies of CO adsorbed on underpotential deposited Ag/Pt electrodes

CO adsorbed on UPD and OPD (under- and overpotential deposited) Ag layers on a Pt electrode surface was studied by SERS and IRRAS in conjunction with cyclic voltammetry. Electrochemical activation of a uniform UPD Ag adlayer produced Ag clusters on the Pt electrode as well as bare Pt sites. The strong adsorption of CO on the UPD Ag/Pt electrode compared with a bulk Ag electrode is explained by the influence of the substrate Pt atoms. The degree of electron back-donation to CO increases the degree of lower frequency shifts of CO on the electrodes in the order Pt electrodes < monolayer Ag/Pt < multilayer Ag/Pt.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Synthesis of polyphthalimidines with benzylidene group from aminophthalide monomers

Two aminophthalide monomers, 6-amino-3-benzylidenephthalide (I) and 3-(p-aminobenzylidene)phthalide (II), underwent self-polycondensation in o-phenylphenol at 250°C to yield polyphthalimidines with inherent viscosities up to 0.5 dL/g. These polymers were readily soluble in a variety of solvents such as dimethylformamide, dimethyl sulfoxide, m-cresol, pyridine, and methylene chloride. The temperatures at which a 10% weight loss occurred by thermogravimetry in nitrogen were 460°C for the polymer derived from I and 490°C for the polymer from II. The glass transition temperature of the polymer from I was 332°C, determined by thermomechanical analysis.     

Plaunol A and B,new anti-ulcer diterpenelactones from Crotonsublyratus

Two new diterpenelactones named plaunol A ($\text{2}$) and B ($\text{3}$) exhibiting anti-Shay ulcer activity were isolated from Thai medicinal plant, $\text{Croton}$$\text{sublyratus}$. Structure of $\text{2}$ was determined by X-ray analysis of its $\text{p}$-bromobenzoate and structure of $\text{3}$ was deduced from the results of chemical correlation and the spectral data.     

Fragmentation study of peptides using Fourier transform ion cyclotron resonance with infrared multiphoton dissociation: experiment and simulation

In this study, the fragmentation of gas-phase protonated Angiotensin II is investigated using electrospray ionization (ESI), Fourier-transform ion cyclotron resonance (FT-ICR), and mass spectrometry (MS) with a laser cleavage infrared multiphoton dissociation (IRMPD) technique. The experimental results show that the spectra peaks for the photoproducts are y2/b6- and y7-type ions, corresponding to the cleavage of His-Pro and Asp-Arg in the parent amino acid sequence. The fragmentation of the peptide under collision-free vacuum conditions is modeled using molecular dynamics simulations (MD). The binding energy for the peptide bonds (C'-N bond) of Angiotensin II is estimated from ab initio calculations. The calculations are directed at predicting experimental measurements of the product ions from the photodissociation of the peptide. The product distributions simulated by the MD dissociation trajectories include predominantly y7/b1 and y2/b6 pair ions.     

The passivation phenomenon of platinum in fused lithium chloride + potassium chloride eutectic: Part II. Chlorine overpotential and superpassivation of platinum

Platinum is known to have a very high chlorine overpotential, about 0.8 V, in fused lithium chloride + potassium chloride eutectic. The high overpotential can be ascribed to the formation of the thick passivation film of platinum chlorides. The high chlorine overpotential was decreased by the addition of alkali metal oxides and a reversible chlorine evolution was revealed in a similar manner as the graphite electrode. The reversible chlorine evolution was ascribed to the formation of the oxide passivation film. The chlorine overpotential at the oxide film was increased stepwise as the applied potential was made more positive. The stepped transitions of the chlorine overpotential was ascribed to the valence change of the oxide film. Platinum shows a typical N-shaped passivation at +0.65 V versus Ag/AgCl(0.1) which has been ascribed to the dissolution of platinum into Pt(II) ions and following formation of the passivation film of supersaturated Pt(II) chloride. Platinum was found to show another passivation phenomenon at high temperatures, above 450°C. The N-shaped current-potential curve was observed at +1.8 V which was far more positive than the potential of the standard chlorine electrode. The dissolution of platinum prior to the passivation was found to occur due to the formation of high valence platinum ions such as Pt⁶⁺ and Pt⁸⁺.     

AuCl(3)-catalyzed benzannulation: synthesis of naphthyl ketone derivatives from o-alkynylbenzaldehydes with alkynes

The reaction of o-alkynylbenzaldehydes 1 and alkynes 2 in the presence of a catalytic amount of AuCl3 in (CH2Cl)2 at 80 degrees C gave naphthyl ketone products in high yields. The AuCl3-catalyzed formal [4 + 2] benzannulation proceeds most probably through the coordination of the triple bond of 1 to AuCl3, the formation of benzo[c]pyrylium auric ate complex via the nucleophilic addition of the carbonyl oxygen atom, the Diels-Alder addition of alkynes 2 to the auric ate complex, and subsequent bond rearrangement. Similarly, the AuCl3-catalyzed reactions of o-alkynylacetophenone and o-alkynylbenzophenone with phenylacetylene afforded the corresponding naphthyl ketone products in good yields.     

A novel synthesis of α-hydroxy- and α,α′-dihydroxyketone from α-iodo and α,α′-diiodo ketone using photoirradiation

A novel reaction of α-iodo ketone (α-iodocycloalkanone, α-iodo-β-alkoxy ester, and α-iodoacyclicketone) with irradiation under a high-pressure mercury lamp gave the corresponding α-hydroxyketone in good yields. In the case of α,α′-diiodo ketone, α,α′-dihydroxyketone which little has been reported until now was obtained. This reaction affords a new, clean and convenient synthetic method for α-hydroxy- and α,α′-dihydroxyketone.     

Purification of a synthetic myristylated peptide by counter-current chromatography

A preparative purification of myristyl-Gly-Asn-Ile-Phe-Ala-Asn-Leu-Phe-Lys-Gly-Leu-Phe-Gly-Lys-Lys-Glu -NH2 was accomplished using the multi-coil counter-current chromatograph. A partition coefficient was determined in the n-butanol-acetic acid-water (4:1:5) system. Chromatographic runs were made in this system and one modified with ethyl acetate. The peptide material showed anomalous elution behavior due to its surfactant properties. It was found that by loading the sample exclusively in the stationary phase, satisfactory retention of the compound occurred. Finally, conditions utilizing the upper phase as the mobile phase successfully separated the impurities.     

Cationic dye-sensitized degradation of sodium hyaluronate through photoinduced electron transfer in the upper excited state

The formation of ground-state complexes of methylene blue (MB) and thionine (TN) with sodium hyaluronate (NaHA) was clearly observed by means of absorption spectra in aqueous solution. Irradiation of the complexes using 313 nm light caused significant degradation of NaHA under oxygen and argon. However, the use of visible light over 400 nm, which gives the lowest excited singlet state of the cationic dyes, caused no degradation. MB and TN were more efficient sensitizers for the degradation of NaHA than rose bengal (RB), although RB is a more efficient singlet oxygen (1O2) sensitizer than the cationic dyes. Under similar conditions the polysaccharides with carboxyl groups, such as alginic acid and polygalacturonic acid, also photodecomposed. However, the polysaccharides without carboxyl groups, such as pullulan and methyl cellulose, did not. The irradiation of the polysaccharides in the presence of powdered titanium dioxide as a photocatalyst to generate the hydroxyl radical (.OH) in aerated aqueous solution caused the fragmentation of all the polymers. It was confirmed that methyl viologen, an electron-accepting sensitizer, formed a charge-transfer complex with NaHA, the irradiation of which caused the efficient degradation of NaHA. In the presence of beta- and gamma-cyclodextrins the MB- and TN-sensitized photodegradation of NaHA was markedly suppressed. This was probably due to the formation of the inclusion complexes comprising the cationic dyes and the cyclodextrins. On the basis of the results obtained we propose that the cationic dye-sensitized degradation of NaHA involves a photoinduced electron-transfer process between the upper excited dyes and the ground-state NaHA and that .OH and 1O2 do not participate in the degradation.