Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Synthesis of 1-alkylselenocyclobutene via intermediate allenyl selenoketene

Reactions of 2-alkynyl arylethynyl selenide 1 with alkyl iodides 3 in the presence of lithium aluminium hydride via allenyl selenoketene 2 afforded cyclobutene 4. Allenyl group of the intermediate allenyl selenoketene 2 was monitored by React IR.     

Synthesis and characterization of three novel perfluoro-oligothiophenes ranging in length from the trimer to the pentamer

In this Article, we report on the synthesis and full characterization of three perfluorinated oligothiophenes, ranging in length from the trimer to the pentamer (PF-nT, with n = 3, 4, or 5). The differential pulse voltammetry (DPV) analysis of the compounds showed that they can be both oxidized and reduced (i.e., they display a dual or amphoteric electrochemical behavior), with the reduction peaks positively shifted relative to those of the corresponding unsubstituted oligothiophenes. The electrochemically determined energy gaps are in agreement with those measured from the UV-vis-NIR absorption spectra in solution. The conjugational properties have been investigated by means of FT-Raman spectroscopy, both as pure solids and as dilute solutes in CH(2)Cl(2), revealing that: (i) pi-conjugation does not still reach saturation with chain length for the longest oligomer, and (ii) conformational distortions from a nearly coplanar arrangement of the successive thiophene units upon solution are not too large. DFT and TDDFT quantum chemical calculations have been performed, at the B3LYP/6-31G level, to assess information about the optimized molecular structure, equilibrium atomic charges distribution, energies and topologies of the frontier molecular orbitals (MO) around the gap, vibrational normal modes associated with the most outstanding Raman scatterings, and vertical one-electron excitations that give rise to the main optical absorptions.     

2-Oxo-1,3-dioxoles as specific substrates for measurement of arylesterase activity

Various 4-arylthiomethyl-2-oxo-1,3-dioxole derivatives IIIa-o were synthesized. Their hydrolysis rates by arylesterase (EC 3.1.1.2) and cholinesterase (EC 3.1.1.8) in human serum were evaluated. Some of them were not hydrolyzed by cholinesterase, but were hydrolyzed easily by arylesterase. Among the substrates, sodium 4-((5-methyl-2-oxo-1,3-dioxol-4-yl)methylthio)benzenesulfonate (IIIg) was selected for its substrate reactivity toward arylesterase and its good water solubility. In addition, neither aliesterase (EC 3.1.1.1), acetylesterase (EC 3.1.1.6) nor cholesterol esterase (EC 3.1.1.13) hydrolyzed the compound. IIIg is thus concluded to be a specific substrate for arylesterase. Our assay system for serum arylesterase using IIIg can be readily applied to an automatic analyzer in the diagnosis of liver cirrhosis.     

Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

Profiling and comprehensive expression analysis of ABC transporter solute-binding proteins of Bacillus subtilis membrane based on a proteomic approach

We analyzed ABC transporter solute-binding proteins (SBPs) of the Bacillus subtilis membrane using a proteomic approach. We prepared a washed cell membrane fraction that was insoluble in 134 mM nondetergent sulfobetaine and then extracted proteins using mixtures of detergents in a stepwise manner. The membrane proteins were resolved by three two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) or two one-dimensional (1-D) PAGE procedures, electroblotted, and digested in the presence of 5% or 80% acetonitrile. Thereafter, matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS) identified 637 proteins corresponding to 15.9% of the total cellular proteins. We predicted that among these, 256 were membrane proteins, 101 were lipoproteins or secretory proteins and 280 were soluble proteins containing peripheral proteins that function in both the cytoplasm and the cell membrane such as SecA and FtsY. Among the 637 proteins, we identified 30 SBPs among 38 importers predicted by a bioinformatic search of the genome. We confirmed expression of the genes for the 30 SBPs using DNA microarray analysis. We compared the 2-D gel separation profiles of submembrane fractions solubilized by 1% n-dodecyl-beta-D-maltoside from cells cultured on Luria Bertani (LB), S7, and S7 medium without glutamate as well as DNA microarray data on LB and S7. The results suggested that YcdH, YtmK and YurO are binding proteins for Mn(++), glutamate and glucose, respectively, and that YqiX and YxeM are binding proteins for amino acids (tryptophan in S7 medium).     

Double-chelation-assisted Rh-catalyzed intermolecular hydroacylation between salicylaldehydes and 1,4-penta- or 1,5-hexadienes

Intermolecular hydroacylation between salicylaldehydes 1, 26-40 and 1,4-penta- or 1,5-hexadienes 4-13 by Rh-catalyst proceeded under mild reaction conditions to give a mixture of iso- and normal-hydroacylated products 14-25, 41-55, and 57-60. In the hydroacylation reaction, chelation of both salicylaldehyde and diene to the Rh-complex plays a crucial role. The ratio of iso- and normal-hydroacylated products could be regulated by the addition of salicylic acid or amines. The effects of various Rh-complexes, solvents, and additives were examined, and the plausible mechanisms of the catalytic cycle were proposed on the basis of the deuterium-labeling salicylaldehyde experiments.     

Higher triplet excited states of benzophenones and bimolecular triplet energy transfer measured by using nanosecond-picosecond two-color/two-laser flash photolysis

The lifetimes of benzophenone in the higher triplet excited state (BP(T(n))) and several BP derivatives in the T(n) states were measured directly to be tau(T(n))=37+/-7 ps and 20-33 ps, respectively, by using the nanosecond-picosecond (ns-ps) two-color/two-laser flash photolysis method. Based on the direct measurements of tau(T(n)) of BP(T(n)), the triplet energy transfer (TET) from BP(T(n)) to quenchers (Q), such as carbon tetrachloride (CCl4), benzene (Bz), and p-dichlorbenzene (DCB), was investigated. The fast TET from BP(T(n)) to Q can be attributed to the lifetime-dependent quenching process, according to the Ware theoretical model of the bimolecular energy transfer reaction. The contribution of the lifetime-dependent term on k(TET) was 27, 60, and 86% for CCl4, Bz, and DCB as the Q of BP(T(n)), respectively, indicating that the TET from BP(T(n)) to Q is influenced not only by tau(T(n)), but also by the size of Q.     

Modern microscopy methods for the structural study of porous materials

This article describes a number of important recent microscopy tools and their application in particular to the study of porous inorganic materials. The authors believe that these new techniques are on the threshold of delivering enormous new power in the chemist's arsenal for understanding new and complex behaviour in multi-component, hierarchical or composite materials. In particular we consider the contribution of electron crystallography, three-dimensional electron tomography, ultra-high resolution scanning electron microscopy as well as the combined application of high-resolution electron microscopy and atomic force microscopy to the study of surfaces and crystal growth. Much of this work has taken on a particular significance owing to the ground breaking work of scientists at Mobil and in Japan 10 years ago in the successful synthesis of materials with porosity on many length scales achieved through the cooperative self-assembly between inorganic and organic phases. This resulted in a series of materials known as M41S of which MCM-41 and MCM-48 were two of the first and most important structures to be synthesised. This has led to a wealth of new porous structures with order over many length scales and has presented new problems in characterisation. Microscopy methods properly executed are particularly important in the study of this new class of material.