Isomerization of aldehyde-2,4-dinitrophenylhydrazone derivatives and validation of high-performance liquid chromatographic analysis

The most widely used method for qualitative and quantitative analysis of carbonyl compounds is the 2,4-dinitrophenylhydrazine method through the formation of 2,4-dinitrophenylhydrazone derivatives. However, this method may cause an analytical error because 2,4-dinitrophenylhydrazones have both E- and Z-stereoisomers. Purified aldehyde-2,4-dinitrophenylhydrazone demonstrated only the E-isomer. However under UV irradiation and the addition of acid, both E- and Z-isomers were seen. The spectral patterns of Z-isomers were different from those of E-isomers and the absorption maximum wavelengths were shifted towards shorter wavelengths by 5-8 nm. An equilibrium Z/E isomer ratio was observed in 0.02-0.2% (v/v) phosphoric acid solutions. In the case of acetaldehyde- and propanal-2,4-dinitrophenylhydrazones, the equilibrium Z/E isomer ratios were 0.32 and 0.14, respectively. However, when irradiated with ultraviolet light at 364 nm, the isomer ratios were increased beyond this constant ratio and reached 0.55 and 0.33, respectively. Zero-order rates for decreases of aldehyde derivatives were observed under UV irradiation (364 nm), however the decreases of concentration were not observed in phosphoric acid solutions. The best method for the determination of aldehyde-2,4-dinitrophenylhydrazones by HPLC is to add phosphoric acid to both the sample and the standard solution, to form a 0.02-1% acid solution.     

Generation of functionalized asymmetric benzynes with TMP-zincates. Effects of ligands on selectivity and reactivity of zincates

We have developed new methods for preparing functionalized benzynes through deprotonative zincation as a key reaction using R2Zn(TMP)Li, and we also describes dramatic ligand effects on the benzyne formation. Deprotonative zincation of various meta-substituted bromobenzenes with Me2Zn(TMP)Li proved effective for the one-pot generation of various 3-functionalized benzynes, particularly those electrophilic substituents such as ester, amide, and cyano. On the other hand, zincation with tBu2Zn(TMP)Li, followed by electrophilic trapping (with I2) proved a powerful tool for the preparation of 1,2,3-trisubstituted aromatic compounds.8 The resultant 1,2,3-trisubstituted benzenes are available as precursors for generation of 3-substituted benzynes by halogen-zinc exchange reactions with Me3ZnLi. These methods offer far greater generality than previous methods for the synthesis of functionalized asymmetric benzynes, and should be of value in new syntheses of various natural products and functional materials. In addition, these results underline the utility of spectator ligands on the central metal of ate complexes as a tunable functionality in the development of new ate complex-promoted reactions.     

Effect of enzyme concentration on the dynamic behavior of a membrane-bound enzyme system

The dynamic behavior of the reaction-diffusion system, composed of glucose oxidase (EC 1.1.3.4) immobilized at a uniform concentration in a membrane, used as a glucose electrode is represented by a diffusion equation with a nonlinear reaction-term in one-dimensional space. The mathematical model is analyzed by computer simulation, that is, numerical integration of the equation under various initial and boundary conditions, to examine the effect of enzyme concentration on the response characteristics (responsiveness and linearity in response) of the electrode. The analysis of the responses of the system to stepwise changes in the boundary value (glucose concentration in simple solution) infers that the enzyme concentration governs the patterns of the spatial distributions of the substrates (glucose and dissolved oxygen) in steady states and transient responses. It is also revealed that the response characteristics of the electrode are optimized with concentration of immobilized enzyme and that the system establishes the steady states at the same spatial distributions of the substrates, regardless of the boundary value. The diffusion of the substrates and the oxygen concentration also have significant effects on the response characteristics of the electrode.     

Side chain-directed assembly of triangular molecular panels into a tetrahedron vs. open cone

Despite their structural similarity, triangular tetradentate ligands 2b and 2c experience different assembly pathways on complexation with (en)Pd(NO3)2 to give M8L4 tetrahedral (3) and open cone (4) structures, respectively, due to steric restriction by side chains at the corner or on the edge of the ligands.     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

A stable silicon congener of highly strained bicyclo[3.2.0]hepta-1,3,6-triene

A silicon-containing fused bicyclic compound with a highly strained bridgehead double bond, 2,3,6,7-tetra-tert-butyl-4-(tert-butyldimethylsilyl)-5-(tert-butyldimethylsiloxy)-5-silabicyclo[3.2.0]hepta-1,3,6-triene (2), was synthesized quantitatively by the reaction of 1,2-bis-tert-butyl-4,4-bis(tert-butyldimethylsilyl)-4-silatriafulvene (3) with di-tert-butylcyclopropenone (4) at 80 degrees C. An X-ray crystallographic analysis for 2 not only confirmed a bicyclic structure having a silacyclopentadiene (silole) ring fused with a silacyclobutene ring but also the remarkable deformation around the double bonds; the sum of the bond angles around the unsaturated bridgehead carbon was 333 degrees . The strain energy of a model 5-silabicyclo[3.2.0]hepta-1,3,6-triene was calculated at the MP2/6-31+G(d,p)//B3LYP/6-31+G(d) level (30.2 kcal/mol) to be comparable to that for parent bicyclo[3.2.0]hepta-1,3,6-triene (30.7 kcal/mol). Despite the high steric strain, 2 was stable enough to be kept intact for several months in the air. The high stability is ascribed to the effective steric protection of the ring system by the bulky substituents.     

Influences of fatty acid moiety and esterification of polyglycerol fatty acid esters on the crystallization of palm mid fraction in oil-in-water emulsion

We examined the crystallization of palm mid fraction (PMF) in oil-in-water (O/W) emulsion, after adding polyglycerol fatty acid esters (PGFEs). We employed ultrasonic velocity measurements and DSC techniques, with special emphases on the influences of fatty acid moiety and esterification of PGFE. Twelve types of PGFEs were examined as additives. PGFEs have a large hydrophilic moiety composed of 10 glycerol molecules to which palmitic, stearic and behenic acids were esterified as the fatty acid moiety with different degrees of esterification. Crystallization temperature (T(c)) of PMF remarkably increased with increasing concentrations of the PGFEs as the chain length of the fatty acid moiety increased, and the PGFE became more hydrophobic in accordance with increasing degree of esterification. We observed that the heterogeneous nucleation of PMF in the O/W emulsion was activated at the oil-water interface, where the template effect of very hydrophobic long saturated fatty acid chains of the PGFE might play the main role of heterogeneous nucleation.     

522—Catalytic oxydation of biological components on platinum electrodes modified by adsorbed metals: Anodic oxidation of glucose

The catalytic oxidation of glucose on Pt electrodes modified by adsorbed metals was studied in 1 M HClO₄ by linear sweep voltammetry. The adsorbed metals (denoted as M_ad, such as Bi_ad and Pb_ad) formed on Pt in the potential region more positive than the reversible potential of an M⁼⁺/M^o couple, lead to a marked increase in the anodic c?urrent of glucose by about one order of magnitude. The catalytic activity depends on the surface coverage by the M_ad. The strongly adsorbed species of lactone type, which are responsible for blocking the successive oxidation, are formed on the electrode surface in the anodic processes of glucose on a bare Pt electrode. The formation of such poisonous species is accelerated in the presence of adsorbed hydrogen on Pt. The effects of M_ad were discussed on the basis that M_ad plays its major role on the Pt electrode surface in removal of the adsorbed hydrogen which initiates the formation of the poisonous species.     

NMR study on the photoresponsive DNA tethering an azobenzene. Assignment of the absolute configuration of two diastereomers and structure determination of their duplexes in the trans-form

Two diastereomers of a photoresponsive oligodeoxyribonucleotide tethering a trans-azobenzene, based on the chirality of the central carbon of a diol linker, were separated by reversed-phase HPLC. On the basis of 2D NMR analysis, absolute configurations of the diastereomers alpha and beta (tentatively designated from differences in their retention time) were determined as R- and S-forms, respectively. For both diastereomers, their NMR-determined duplex structure showed that trans-azobenzene intercalates between base pairs, because distinct NOEs were observed between the protons of azobenzene and those of the adjacent base pairs, such as with the imino protons and methyl protons of thymine. The melting temperatures of both duplexes were higher than that of the corresponding native duplex, which contained no azobenzene residue, due to the intercalated trans-azobenzene stabilizing the duplex by a stacking interaction. Between these two diastereomers, differences in T(m) were also found: the melting temperature of the R-form duplex (alpha-isomer) was higher than that of the S-form (beta-isomer). On the basis of the NMR-determined structure, this difference was attributed to the fact that the S-form (beta isomer) causes more stress forming the duplex than does the R-form (alpha isomer) due to disturbances of the right-hand helix.     

Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.