Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.     

Gamow-Teller strength in the exotic odd-odd nuclei 138La and 180Ta and its relevance for neutrino nucleosynthesis

The Gamow-Teller strength distributions below the particle threshold in 138La and 180Ta, deduced from high-resolution measurements of the (3He,t) reaction at 0 degrees, allow us to evaluate the role of charged-current reactions for the production of these extremely rare nuclides in neutrino-nucleosynthesis models. The analysis suggests that essentially all 138La in the Universe can be made that way. Neutrino nucleosynthesis also contributes significantly to the abundance of 180Ta but the magnitude depends on the unknown branching ratio for population of the long-lived isomer.     

Photo-alignment Property of Azobenzene-containing Polyimide Films Swollen by Alkyl-amine

Photo-alignment efficiency of polyimide containing azobenzene in the backbone structure (Azo-PI) is significantly enhanced by exposing the precursor (polyamic acid: Azo-PAA) film to alkyl-amine vapor prior to photo-alignment. In this study, we have investigated the relationships between the alkyl-amine vapor treatment time, the swelling ratio of Azo-PAA films, and the photo-induced in-plane anisotropy. We found that: the Azo-PAA film swells on exposure to alkyl-amine vapor, and the swelling finally saturates; and the photo-induced in-plane anisotropy is correlated very closely with the swelling ratio. In addition, we pointed out the importance of the process order of alkyl-amine vapor treatment and photo-alignment.     

Enhanced CO2 adsorptivity of SWCNT by polycyclic aromatic hydrocarbon intercalation

We tuned the electronic properties of single wall carbon nanotube (SWCNT) with intercalation of naphthalene derivatives (NDs) having different electron donor or acceptor property in the SWCNT bundles. Characterization of the adsorbed SWCNT with Raman spectroscopy and electrical conductivity measurement clearly indicate the charge transfer interaction of ND molecules with SWCNT. Also X-ray diffraction supports the intercalation of ND molecules in the interstitial spaces and groove sites of SWCNT bundle. Intercalation of ND molecules enhances remarkably the CO₂ adsorptivity, which can be ascribed to the key importance of the interaction of the quadrupole moment of CO₂ with the local electrical field on the SWCNT induced by the charge transfer interaction.     

Molecularly Designed Nanoparticles by Dispersion of Self‐Assembled Organosiloxane‐Based Mesophases

The design of siloxane‐based nanoparticles is important for many applications. Here we show a novel approach to form core–shell silica nanoparticles of a few nanometers in size through the principle of “dispersion of ordered mesostructures into single nanocomponents”. Self‐assembled siloxane–organic hybrids derived from amphiphilic alkyl‐oligosiloxanes were postsynthetically dispersed in organic solvent to yield uniform nanoparticles consisting of dense lipophilic shells and hydrophilic siloxane cores. In situ encapsulation of fluorescent dyes into the nanoparticles demonstrated their ability to function as nanocarriers.     

Expression and Characterization of Recombinant GH11 Xylanase from Thermotolerant Streptomyces sp. SWU10

Xylans are major hemicellulose components of plant cell wall which can be hydrolyzed by xylanolytic enzymes. Three forms of endo-β-1,4-xylanases (XynSW1, XynSW2A, and XynSW2B) produced by thermotolerant Streptomyces sp. SWU10 have been reported. In the present study, we described the expression and characterization of the fourth xylanase enzyme from this bacteria, termed XynSW3. The gene containing 726 bp was cloned and expressed in Escherichia coli. The recombinant enzyme (rXynSW3) was purified from cell-free extract to homogeneity using Ni-affinity column chromatography. The apparent molecular mass of rXynSW3 was 48 kDa. Amino acid sequence analysis revealed that it belonged to a xylanase of glycoside hydrolase family 11. The optimum pH and temperature for enzyme activity were 5.5–6.5 and 50 °C, respectively. The enzyme was stable up to 40 °C and in wide pH ranges (pH 0.6–10.3). Xylan without arabinosyl side chain is the most preferable substrate for the enzyme. By using birch wood xylan as substrate, rXynSW3 produced several oligosaccharides in the initial stage of hydrolysis, and their levels increased with time, demonstrating that the enzyme is an endo-acting enzyme. The major products were xylobiose, triose, and tetraose. The rXynSW3 can be applied in several industries such as food, textile, and biofuel industries, and waste treatment.     

Photoluminescent Ferroelastic Molecular Crystals

Ferroelasticity has been reported for several types of molecular crystals, which show mechanical‐stress‐induced shape change under twinning and/or spontaneous formation of strain. Aiming to create materials that exhibit both ferroelasticity and light‐emission characteristics, we discovered the first examples of ferroelastic luminescent organometallic crystals. Crystals of arylgold(I)(N‐heterocyclic carbene)(NHC) complexes bend upon exposure to anisotropic mechanical stress. X‐ray diffraction analyses and stress‐strain measurements on these ferroelastic crystals confirmed typical ferroelastic behavior, mechanical twinning, and the spontaneous build‐up of strain. A comparison with single‐crystal structures of related gold‐NHC complexes that do not show ferroelasticity shed light on the structural origins of the ferroelastic behavior.     

Geometrical Evolution and Formation of the Photoproduct in the Cycloreversion Reaction of a Diarylethene Derivative Probed by Vibrational Spectroscopy

The geometrical evolution of the reactant and formation of the photoproduct in the cycloreversion reaction of a diarylethene derivative were probed using time-resolved absorption spectroscopies in the visible to near-infrared and mid-infrared regions. The time-domain vibrational data in the visible region show that the initially formed Franck-Condon state is geometrically relaxed into the minimum in the excited state potential energy surface, concomitantly with the low-frequency coherent vibrations. Theoretical calculations indicate that the nuclear displacement in this coherent vibration is nearly parallel to that in the geometrical relaxation. Time-resolved mid-infrared spectroscopy directly detected the formation of the open-ring isomer with the same time constant as the decrease of the closed-ring isomer in the excited state minimum. This observation reveals that no detectable intermediate, in which the population is accumulated, is present between the excited closed-ring isomer and the open-ring isomer in the ground state.