LSI-based amperometric sensor for bio-imaging and multi-point biosensing

We have developed an LSI-based amperometric sensor called "Bio-LSI" with 400 measurement points as a platform for electrochemical bio-imaging and multi-point biosensing. The system is comprised of a 10.4 mm × 10.4 mm CMOS sensor chip with 20 × 20 unit cells, an external circuit box, a control unit for data acquisition, and a DC power box. Each unit cell of the chip contains an operational amplifier with a switched-capacitor type I-V converter for in-pixel signal amplification. We successfully realized a wide dynamic range from ±1 pA to ±100 nA with a well-organized circuit design and operating software. In particular, in-pixel signal amplification and an original program to control the signal read-out contribute to the lower detection limit and wide detection range of Bio-LSI. The spacial resolution is 250 μm and the temporal resolution is 18-125 ms/400 points, which depends on the desired current detection range. The coefficient of variance of the current for 400 points is within 5%. We also demonstrated the real-time imaging of a biological molecule using Bio-LSI. The LSI coated with an Os-HRP film was successfully applied to the monitoring of the changes of hydrogen peroxide concentration in a flow. The Os-HRP-coated LSI was spotted with glucose oxidase and used for bioelectrochemical imaging of the glucose oxidase (GOx)-catalyzed oxidation of glucose. Bio-LSI is a promising platform for a wide range of analytical fields, including diagnostics, environmental measurements and basic biochemistry.     

Chromogenic indicator for anion reporting based on an N-substituted oxoporphyrinogen

5,10,15,20-Tetrakis-3,5-di-tert-butyl-4-oxocyclohexadienylidene porphyrinogen and its di-N-benzylated derivative are solvatochromic dyes capable of binding anionic species. The influence of solvent polarity and hydrogen bonding on their electronic absorption spectra was observed. Hydrogen bonding by the porphyrinogen amine protons of acetone solvent molecules could be observed in the solid state. The acetone solvate of N21N23-dibenzyl-5,10,15,20-tetrakis-3,5-di-tert-butyl-4-oxocyclohexadienylidene porphyrinogen crystallized under anhydrous conditions in the space group P with cell dimensions a = 12.1693(11) A, b = 17.5849(13) A, c = 21.0965(17) A, alpha = 69.870(4) degrees , beta = 78.140(4) degrees , gamma = 82.865(5) degrees . These porphyrinogens are capable of binding a variety of anions and can be used to distinguish fluoride chromogenically from the other halide anions. Solvatochromism was combined with anion binding in an attempt to provide more selective tests for anions. The anion binding properties were investigated using UV/vis spectrophotometry and 1H NMR spectroscopy.     

Certified reference material for quantification of polycyclic aromatic hydrocarbons in sediment from the National Metrology Institute of Japan

The National Metrology Institute of Japan has issued a certified reference material (CRM) of freshwater lake sediment for polycyclic aromatic hydrocarbon (PAHs) analyses. The certification used three extraction techniques: pressurized liquid extraction (PLE) with toluene, PLE with dichloromethane/ethyl acetate (1:1 by volume), and alkaline extraction (1 M KOH in methanol) in combination with microwave-assisted extraction. Both gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/dopant-assisted atmospheric pressure photoionization/MS (LC/DA-APPI/MS) analyses were used. Certified values are provided for 18 PAHs at 1–25 μg kg⁻¹ except for perylene (2.08 × 10³ μg kg⁻¹), and information values are provided for two. Since the values of PAHs in the CRM are much lower than those in other CRMs and are comparable to those found at sites with little human influence, the CRM is suitable for PAH monitoring in sediment and soil samples.     

Novel conversion of 6H-1,3,5-oxathiazine S-oxides into 5-membered heterocyclic compounds

5H-1,2,4-oxathiazoles were efficiently synthesized from 6H-1,3,5-oxathiazine S-oxides by thermal cycloreversion of the substrates and the products were effectively converted into 1,2,4-thiadiazoles. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:175–186, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20004     

Novel conversion of 6H-1,3,5-oxathiazine S-oxides into 3H-1,2,4-dithiazoles by treating with Lawesson's reagent

Treatment of 6H-1,3,5-oxathiazine S-oxides by Lawesson's reagent (LR) at high temperature furnished 3H-1,2,4-dithiazoles in moderate to good yields. Deoxygenation of 6H-1,3,5-oxathiazine S-oxides was performed by LR in the presence of EtOH. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:208–215, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20011     

Numerical analysis of orthogonal functional systems for finite Fresnel transform

Optical Review - The fundamental formula in an optical system is Rayleigh diffraction integral. In practice, we deal with Fresnel diffraction integral as approximate diffraction formula. Fresnel...