Studies on transannulation reactions across a nine-membered ring: the synthesis of natural product-like structures

A series of diverse natural product-like structures have been synthesised by the use of a number of novel transannulation reactions across a cyclononene ring. Transannular cyclisations through oxygen functionality have generated a number of bicyclo[5.3.1]systems containing bridged cyclic ethers and bicyclo[5.2.2]lactones, as well as a tetrahydrofuran-containing bridged analogue of hexacyclinic acid. An unprecedented Br?nsted acid mediated transannular cyclisation between proximal carbons generated bicyclo[4.3.0]nonanes which form the core of the pinguisane and austrodorane families of sesquiterpenoids. In all cases the key factor that determined the mode of reactivity was the conformation of the nine-membered ring and the distance between the reacting centres.     

Facile design and nanostructural evaluation of silver-modified titania used as disinfectant

Fundamental research has been carried out to define optimal "green" synthesis conditions for the production of titania (TiO(2)) and silver (Ag) nanocomposites (TANCs) ranging from 12.7-22.8 nm in diameter. A bottom-up colloidal approach was employed to accurately control TANC monodispersity and composition. TANCs were found to be effective at inactivating Escherichia coli (E. coli) in water. The presence of Ag in the nanocomposites induced a decrease in TiO(2) band gap energy, which favoured valence to conduction band electron transfer and allowed for electron excitation using visible light. Aggregation of ultra-fine particles was prevented through the use of a long-chain polymer as evidenced by electrophoretic mobility studies. The TANCs catalyzed oxidation of bacterial membranes and cell death or disinfection. Theoretically, the TANC mode of E. coli disinfection is via water photolysis, which results in production of hydroxyl radicals and hydrogen peroxide. These interact with the outer membrane polysaccharides and lipids, leading to lipid peroxidation, membrane weakening and resulted in cell death. Our overarching goals were to optimize the variables involved in TANC "green" synthesis and to characterize its nanostructure. High resolution (HR) transmission and scanning electron microscopic (TEM and SEM) studies demonstrated that TANCs were highly crystalline and mono-dispersive. Elemental composition of Ag and Ti, as measured by X-ray energy dispersive (EDS) and X-ray photoelectron spectroscopy (XPS) confirmed sample purity. Ultraviolet-visible (UV-VIS) spectroscopy showed that the energy band-gap of Ag modified TiO(2) was in the visible range.     

Urease inhibition and anti-leishmanial assay of substituted benzoylguanidines and their copper(II) complexes

A series of N,N',N'-trisubstituted guanidines (1-6) and their copper(II) complexes, [κ(2)(O,N)-C(6)H(5)CONHC(NHC(6)H(4)Cl)NR](2)Cu(ii) (R = iso-propyl (1a), n-butyl (2a), sec-butyl (3a), tert-butyl (4a), benzyl (5a), and para-tolyl (6a)) were synthesized and characterized using elemental analysis, FTIR and NMR spectroscopy. DFT studies were used to assess the location of the protons in the free ligands. However, calculations have shown that, in all cases, hydrogen bonding from either N-H group gives conformations that are very similar in energy. Single crystal XRD studies were used to characterize ligands 1 and 4 and the related complexes 1a and 4a. The structures reveal that these complexes are mononuclear in the solid state and that copper adopts a regular square planar geometry. In both metallic species, the N, N', N'-trisubstituted guanidine ligands chelate the Cu(II) atom using the oxygen and one nitrogen. The synthesized compounds were investigated for urease inhibition using thiourea as a standard drug. Most complexes exhibit a better activity than the respective guanidines and compound 1a was found to be the most active with IC(50) = 9.83 ± 0.07 μM (the IC(50) for thiourea is 21.0 ± 0.1 μM). The species were also screened for their anti-leishmanial activity. However, all of the compounds were devoid of any significant activity.     

Studies on the constituents of the green alga <Emphasis Type="Italic">Ulva lactuca</Emphasis>

Phytochemical investigations on a marine green alga Ulva lactuca led to the isolation of two new compounds (E)-6-heptacosen-5-one (1) and (E)-6-octadecen-5-ol (2), along with four known compounds, (Z)-10-hexacosene (3), docosanoic acid (4), palmitic acid (5), and isofucosterol (6). Compounds 3 and 4 were isolated for the first time from this species. The structures of the compounds were deduced with the help of modern spectroscopic techniques.     

High-sensitivity capillary electrophoresis method for monitoring purine nucleoside phosphorylase and adenosine deaminase reactions by a reversed electrode polarity switching mode

A simple, efficient, and highly sensitive in-line CE method was developed for the characterization and for inhibition studies of the nucleoside-metabolizing enzymes purine nucleoside phosphorylase (PNP) and adenosine deaminase (ADA) present in membrane preparations of human 1539 melanoma cells. After filling the running buffer (50 mM borate buffer, 100 mM SDS, pH 9.10) into a fused-silica capillary (50 cm effective length × 75 μm), a large sample volume was loaded by hydrodynamic injection (5 psi, 36 s), followed by the removal of the large plug of sample matrix from the capillary using polarity switching (-20 kV). The current was monitored and the polarity was reversed when 95% of the current had been recovered. The separation of the neutral analytes (nucleosides and nucleobases) was performed by applying a voltage of 15 kV. An about 10-fold improvement of sensitivity for the five investigated analytes (adenosine, inosine, adenine, hypoxanthine, xanthine) was achieved by large-volume stacking with polarity switching when compared with CE without stacking. For inosine and adenine detection limits as low as 60 nM were achieved. To the best of our knowledge, this represents the highest sensitivity for nucleoside and nucleobase analysis using CE with UV detection reported so far. The Michaelis-Menten constants (K(m)) for PNP and ADA and the inhibition constants (K(i)) for standard inhibitors determined with the new method were consistent with literature data.     

Carrageenan as an elicitor of induced secondary metabolites and its effects on various growth characters of chickpea and maize plants

The effects of polysaccharide elicitor k-carrageenan obtained from Hypnea musciformis, red algae on the production of Induced Secondary Metabolites, ISMs (the disease resistance compounds) and on various growth characters of chickpea and maize plants were studied. Experiments were conducted in the field of PCSIR Laboratories Complex Karachi during December 2008–April 2009 in randomized complete block design with three replications. Three elicitor treatments were used, a solid preparation in which the elicitor was mixed with soil (T₂ 1 mg/g) and applied around the seeds in the soil. The two other preparations were liquid, T₁ and T₃ at a concentration of 100 μg glc eq ml⁻¹ and were applied around the sowing seeds and as a foliar spray on the plants, respectively. Statistical analysis of the data revealed that these treatments significantly enhanced all the growth characters of chickpea except T₂ that gave the nonsignificant difference in the plant height. Maximum plant height (80.3 cm), number of pods plant⁻¹ (76.2), number of branches plant⁻¹ (25.0), number of leaves plant⁻¹ (125.6), earlier flowering and high ISMs contents in leaves, stem and grains of chickpea were recorded in T₁ treated chickpea plants. In maize plants only T₁ and T₃ treatments (with minor exceptions) had significant effects on few characters like plant height, stem diameter, number of leaves plant⁻¹ and on ISMs contents in leaves while number of cobs plant⁻¹ and flowering time were nonsignificantly affected by these treatments. These results suggested that k-carrageenan elicitor can be used as a potent plant protectant as well as growth promoting agent especially for chickpea plants.     

A novel single source precursor: [bis(N,N-diethyl-N'-naphthoyl-selenoureato)palladium(II)] for palladium selenide thin films and nanoparticles

We describe for the first time the use of a single source precursor to deposit thin films and nanocrystals of palladium selenide.     

Adsorption of acid yellow dye on flakes of chitosan prepared from fishery wastes

Chitosan flakes, extracted from prawns and labeo rohita scales, with high adsorption capacity were prepared after chemical treatment and were used to remove acid yellow dye from water. The results showed that adsorption capacity is dependent on pH, initial concentration of dye, BET, Langmuir surface area and pore volume of the adsorbent. In acidic conditions, the polymer amino groups were protonated (positively charged polymer chain), which showed attraction with negative ions of anionic dye. Chitosan from prawns scales showed higher dye adsorption under the same experimental conditions. Adsorption isotherms were developed and equilibrium data fitted well to Langmuir and Freundlich isotherm models.     

Effects of exponential volume fraction law on the natural frequencies of FGM cylindrical shells under various boundary conditions

In the present work, vibration characteristics of thin functionally graded cylindrical shells are studied under the influence of various boundary conditions. Fabrication of FGM cylindrical shell is carried out by using exponential volume fraction law. Strain- and curvature-displacements relationships are taken from Love’s thin shell theory. The frequency equation in the form of eigenvalue problem is obtained by adapting the Rayleigh-Ritz method. Characteristic beam functions are assumed to approximate the axial modal dependence. Effects of exponential volume fraction law on the natural frequencies of the FGM cylindrical shells for various boundary conditions are studied against circumferential wave number, length to radius ratio and thickness to radius ratio for different values of power law exponents. Results evaluated show good agreement with those available in the literature.     

Structural and optoelectronic properties of antimony tin sulphide thin films deposited by thermal evaporation techniques

Thin films of SnSb₂S₄ have been prepared on glass substrate by using thermal evaporation techniques. The films were annealed in argon gas at low pressure in sealed glass ampoules at 85 °C, 150 °C, 275 °C and 325 °C. XRD of the films reveal that the low temperature annealed films are poly crystalline while the as deposited films and high annealed films are in amorphous states. There is no adequate variation in the photoconductivity response of the amorphous and crystalline phases. The transmittance of the films is low and having no transmittance below 740 nm. The band gap calculated by ellipsometry technique is in the range of 1.82–3.1 eV. The films have n-type conductivity but the film annealed at 325 °C show p-type conductivity.