New Amphiphilic Ionic Liquids for the Demulsification of Water-in-Heavy Crude Oil Emulsion

This work aimed to use abietic acid (AA), as a widely available natural product, as a precursor for the synthesis of two new amphiphilic ionic liquids (AILs) and apply them as effective demulsifiers for water-in-crude oil (W/O) emulsions. AA was esterified using tetraethylene glycol (TEG) in the presence of p-toluene sulfonic acid (PTSA) as a catalyst obtaining the corresponding ester (AATG). AATG was reacted with 1-vinylimidazole (VIM) throughout the Diels–Alder reaction, forming the corresponding adduct (ATI). Following this, ATI was quaternized using alkyl iodides, ethyl iodide (EI), and hexyl iodide (HI) to obtain the corresponding AILs, ATEI-IL, and ATHI-IL, respectively. The chemical structure, surface activity, thermal stability, and relative solubility number (RSN) were investigated using different techniques. The efficiency of ATEI-IL and ATHI-IL to demulsify W/O emulsions in different crude oil: brine volumetric ratios were evaluated. ATEI-IL and ATHI-IL achieved promising results as demulsifiers. Their demulsification efficiency increased as the brine ratios decreased where their efficiency reached 100% at the crude oil: brine ratio (90:10), even at low concentrations.     

Novasomes as Nano-Vesicular Carriers to Enhance Topical Delivery of Fluconazole: A New Approach to Treat Fungal Infections

The occurrence of fungal infections has increased over the past two decades. It is observed that superficial fungal infections are treated by conventional dosage forms, which are incapable of treating deep infections due to the barrier activity possessed by the stratum corneum of the skin. This is why the need for a topical preparation with advanced penetration techniques has arisen. This research aimed to encapsulate fluconazole (FLZ) in a novasome in order to improve the topical delivery. The novasomes were prepared using the ethanol injection technique and characterized for percent entrapment efficiency (EE), particle size (PS), zeta potential (ZP), drug release, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and antifungal activity. The FN7 formulation with 94.45% EE, 110 nm PS and −24 ZP proved to be the best formulation. The FN7 formulation showed a 96% release of FLZ in 8 h. FTIR showed the compatibility of FLZ with excipients and DSC studies confirmed the thermal stability of FLZ in the developed formulation. The FN7 formulation showed superior inhibition of the growth of Candida albicans compared to the FLZ suspension using a resazurin reduction assay, suggesting high efficacy in inhibiting fungal growth.     

A New Xanthone Glycoside from Mangifera indica L.: Physicochemical Properties and In Vitro Anti-Skin Aging Activities

A new xanthone glycoside, 1,3,5,6-tetrahydroxyxanthone-C-4-β-d-glucopyranoside was isolated from the methanol extract of Mangifera indica leaves (Anacardiaceae) growing in Egypt. The structure was clarified by 1D and 2D-NMR spectroscopic data. The physicochemical properties of the compound such as lipophilicity, solubility, and formulation considerations were predicted via in silico ADMET technique using the SwissADME server. This technique provided Lipinski’s rule of five, such as GIT absorption, distribution, metabolism, and skin permeation. The in vitro inhibitory activities against aging-mediated enzymes such as collagenase, elastase, hyaluronidase, and tyrosinase were assessed. The compound exhibited remarkable anti-collagenase, anti-elastase, anti-hyaluronidase, and anti-tyrosinase effects with IC₅₀ values of 1.06, 419.10, 1.65, and 0.48 µg/mL, respectively, compared to the positive control. The compound showed promising predicted aqueous solubility and reasonable skin penetration suggesting the suitability of the compound for topical formulation as an anti-aging agent for cosmetic preparations.     

A manganese Schiff base complex immobilized on copper–ferrite magnetic nanoparticles as an efficient and recyclable nanocatalyst for selective oxidation of alcohols

A magnetically recoverable nanocatalyst was synthesized by covalent binding of a Schiff base ligand, namely N,N′-bis(Salicylidene)-1,3-diaminopropane-2-ol (H₂salpn), onto the surface of silica-coated magnetic CuFe₂O₄ nanoparticles, followed by complexation with MnCl₂. The resulting core–shell nanoparticles were characterized by spectroscopic and microscopic methods, including FTIR, XRD, VSM, TGA elemental analysis, TEM, and SEM. The Mn content was determined by ICP analysis. The nanoparticles were investigated as a catalyst for the selective oxidation of alcohols to the corresponding carbonyl compounds with tertiary-butyl hydrogen peroxide. The catalyst can be magnetically separated for reuse, with no noticeable loss of activity in subsequent reaction cycles. FTIR, VSM, and leaching experiments after three successive cycles confirmed that the catalyst was strongly anchored to the magnetic nanoparticles. A suitable mechanism for the reaction is proposed.     

Cyclic Olefin Copolymer Interleaves for Thermally Mendable Carbon/Epoxy Laminates

Thin cyclic olefin copolymer (COC) foils were used as intrinsic thermoplastic healing agents in carbon fiber (CF)-reinforced epoxy laminates. COC films were produced by hot pressing and were interleaved in the interlaminar regions between each EP/CF lamina, during the hand layup fabrication of the laminates. Three samples were produced, i.e., the neat EP/CF laminate without COC, and two laminates containing COC layers with a thickness of 44 μm and 77 μm, respectively. It was observed that the fiber volume fraction decreased, and the porosity increased with the introduction of COC layers, and this effect was more evident when thick films were used. These two effects, combined with the sub-optimal adhesion between COC and EP, caused a decrease in the mechanical properties (i.e., the elastic modulus, flexural strength, interlaminar shear strength and interlaminar fracture toughness) of the laminates. Specimens subjected to mode I interlaminar fracture toughness test were then thermally mended under pressure by resistive heating, through the Joule effect of conductive CFs. A temperature of approximately 190 °C was reached during the healing treatment. The healing efficiency was evaluated as the ratio of critical strain energy release rate (G_IC) of the healed and virgin specimens. Healed specimens containing COC layers of 44 μm and 77 μm exhibited a healing efficiency of 164% and 100%, respectively. As expected, the healing treatment was not beneficial for the neat EP/CF laminate without COC, which experienced a healing efficiency of only 2%. This result proved the efficacy of COC layers as a healing agent for EP/CF laminates, and the effectiveness of resistive heating as a way to activate the intrinsic healing mechanism.     

A general finite plasticity model with a smooth elastic-plastic transition and isotropic hardening. A finite element formulation and numerical verification

A number of approaches for finite deformation elastoplasticity with different classes of kinematic decomposition have been published in the literature (e.g. additive split of the Lagrange strain, multiplicative split of the deformation gradient, additive split of the rate of deformation, etc.). In the present work, a general theoretical framework for modeling a smooth elastic inelastic transition for large deformations of rate independent elastic-plastic and rate dependent elastic-viscoplastic materials has been proposed. It is well known that in classical rate independent elastic-plastic models the transition from the elastic regime to the plastic regime is rather sharp, while in the present model this transition is smooth and both rate independent and rate dependent models are characterized by overstress. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Cost,revenue and profit efficiency measurement in DEA: A directional distance function approach

Estimation of efficiency of firms in a non-competitive market characterized by heterogeneous inputs and outputs along with their varying prices is questionable when factor-based technology sets are used in data envelopment analysis (DEA). In this scenario, a value-based technology becomes an appropriate reference technology against which efficiency can be assessed. In this contribution, the value-based models of Tone (2002) are extended in a directional DEA set up to develop new directional cost- and revenue-based measures of efficiency, which are then decomposed into their respective directional value-based technical and allocative efficiencies. These new directional value-based measures are more general, and include the existing value-based measures as special cases. These measures satisfy several desirable properties of an ideal efficiency measure. These new measures are advantageous over the existing ones in terms of (1) their ability to satisfy the most important property of translation invariance; (2) choices over the use of suitable direction vectors in handling negative data; and (3) flexibility in providing the decision makers with the option of specifying preferable direction vectors to incorporate their preferences. Finally, under the condition of no prior unit price information, a directional value-based measure of profit inefficiency is developed for firms whose underlying objectives are profit maximization. For an illustrative empirical application, our new measures are applied to a real-life data set of 50 US banks to draw inferences about the production correspondence of banking industry.     

On mass transfer in three‐dimensional flow of a viscoelastic fluid

This attempt theoratically examines the mass transfer analysis of the boundary layer flow caused by a stretching surface. Analytic solutions are derived with the Homptopy analysis method (HAM). Numerical values of skin friction coefficients and the surface mass transfer are reported. The effectiveness of this method is explicitly illustrated by discussing the convergence of the obtained series solutions. Velocity and gradient of mass transfer are shown graphically and discussed. © 2010 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 27: 915–936, 2011     

Characterization of deep acceptor level in as-grown ZnO thin film by molecular beam epitaxy

We report deep level transient spectroscopy results from ZnO layers grown on silicon by molecular beam epitaxy(MBE). The hot probe measurements reveal mixed conductivity in the as-grown ZnO layers, and the current–voltage(I–V)measurements demonstrate a good quality p-type Schottky device. A new deep acceptor level is observed in the ZnO layer having activation energy of 0.49±0.03 eV and capture cross-section of 8.57×10-18cm2. Based on the results from Raman spectroscopy, photoluminescence, and secondary ion mass spectroscopy(SIMS) of the ZnO layer, the observed acceptor trap level is tentatively attributed to a nitrogen–zinc vacancy complex in ZnO.