A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

Snytheses of analgesics. Part XXXVII. An alternative synthesis of 1,2,3,4, 5, 6-hexahydro-8-hydroxy-2,6-methano-6, h-dimethyl-3-phenethyl-3-benzazoeine [studies on the syntheses of heterocyclic compounds. Part DXXI]

Acid treatment of the alkylated products of (Va, Vb, and VIII) of piperidinols IVa and IVb, and tetrahydropyridine VII with β-bromoethylbenzene, afforded 1,2,3,4,5,6-hexahydro-8-hydroxy-2,6-methano-6,1 1-dimethyl-3-phenethyl-3-benzazocine (la) in good yield. Piperidinols Va and Vb were also obtained from the reaction of N-(3-methyl-3-pentenyl)-β-phenethylamine (IIb) with methyl 3-(4-methoxyphenyl)-2,3-epoxypropionate.     

Physical and Chemical Properties of Four-Membered Bis(triphenylphosphane)platinum(II) Sulfenato Thiolato Complexes

The reaction of isolable dithiirane 1-oxides with (Ph 3 P) 2 Pt( m 2 -C 2 H 4 ) provided the title complexes in high yields. 31 P NMR spectroscopy of the phosphine ligands of the complexes and x-ray crystallographic analysis of a complex were reported.     

Flexible active matrix addressed displays manufactured by printing and coating techniques

A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

High-speed deposition of RE123 film with large current capacity by hot-wall type PLD system

We have studied a hot-wall heating system to produce GdBa₂Cu₃O_y (GdBCO) films with large critical currents (I_c) at a high production rate by a pulsed-laser-deposition (PLD) method. GdBCO films fabricated at a production rate of 30 m/h under the optimized conditions, especially a distance of 95 mm between the target and the substrate (T–S), exhibited high critical current densities (J_c) of about 3 MA/cm² and I_c over 300 A at a thickness of 1–2 μm. Furthermore, long GdBCO tapes prepared by repeated depositions at each tape-passing speed of 80 m/h showed uniform I_c distribution along the longitudinal direction, because the hot-wall system enabled to stabilize temperature within a few degrees at 800 °C. A 170 m long tape with I_c over 600 A was successfully fabricated at a production rate of 16 m/h using a laser power of 360 W.     

Synthesis and Magnetic Property of Polyacetylene Bearing πConjugated Bis(Diphenylene)Phenylallyl Radical

Abstract

m- and p Bis(diphenylene)propenylphenylacetylene (m-, p-8) were synthesized and polymerized with WCI₆, MoCl₅, and Rh catalyst, yielding solvent-soluble poly(phenylacetylene)s bearing a π-conjugated bis(di-phenylene)propenyl groups (m-, p-7a). The polymers gave their polyanion derivatives, which were electrolytically and chemically oxidized to yield the corresponding polyradicals (m-, p-7b). The polyradicals were chemically very stable due to the resonance stabilization of an unpaired electron whose spin concentration could be increased up to ca. 2 × 10²³ spins per molar monomer unit. ESR spectroscopy suggested an antiferro-magnetic interaction between unpaired electrons.     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.     

Polymorphism of Acrylic and Methacrylic Acid Esters Containing Long Fluorocarbon Chains and Their Polymerizability

The molecular aggregation of acrylic and methacrylic acid esters containing long-fluorocarbon chains: 2-(perfluoroalkyl)ethyl acrylate (FF_nEA) and 2-(perfluoroalkyl)ethyl methacrylate (FF_nEMA) (F(CF₂)_nCH₂CH₂OCOC(X)=CH₂, where X=H, CH₃ and n=6, 8, 10) was investigated by differential scanning calorimetry (DSC) and temperature controlled X-ray powder diffraction measurement. These compounds exhibited some characteristic polymorphic behaviors depending on the length of fluorocarbon chain and the -position methyl group. The solid-state polymerization by -ray irradiation was studied for these compounds in the various crystal forms. In the solid-state polymerization, highest polymerizability was observed in the crystal form that exists in the highest temperature region for each compound.This revised version was published online in November 2005 with corrections to the Cover Date.