Determination of fatty acids in atmospheric samples via GC/MS

Summary Atmospheric precipitation and aerosol samples are characterized by a complex mixture of several organic compounds. A simple method for the simultaneous determination of the main compound classes by GC/MS is presented. In detail, seasonal variations of C₈–C₃₂ fatty acids in precipitation in a semirural area have been studied. Total fatty acids concentrations of 7–53 g/l were detected. Summer rain is characterized by high amounts of fatty acids >C₂₀ and lower amounts of C₁₁–C₂₀ species. Two effects may be responsible: larger emission rates of fatty acids during vegetation periods and an increased influence of vapour phase due to higher temperatures during summer. CPI values showed no general trend; lower CPI values for winter rain could not be observed. This would be expected if anthropogenic sources play an important role. Monounsaturated fatty acids (C_16:1, C_18:1) were more abundant during winter than in summer. High concentrations of polyunsaturated fatty acids (C_18:x) could be detected during summer. High relative concentrations of the potential oxidation products of the unsaturated species, nonanedioic acid and w-oxononanoic acid, are associated with relatively low concentrations of their precursors.     

16, 18O induced transfer reactions on122, 120Sn

The reactions¹²⁰Sn+72 MeV¹⁸O and¹²²Sn+74 MeV¹⁶O were investigated with time of-flightE-E-telescopes. Data are presented for all quasi-elastic reaction channels. The two neutron stripping and pickup reactions (¹⁸O,¹⁶O), (¹⁸O,²⁰O) and (¹⁶O,¹⁸O) are analyzed in detail. It is shown that these heavy ion induced two neutron transfer reactions proceed with essentially the same type of selectivity as the corresponding light ion induced reactions. The differential cross sections for transfer reactions leaving the^{120, 122}Sn nuclei in their 2⁺ first excited states are shown to be influenced by interference effects due to additional inelastic excitations.     

Inner-shell ionization ofZ=25–32 elements by 5-48 MeV32S ions

TheK-shell ionization cross sections of Mn, Ni, Cu, Zn and Ge under³²S bombardment have been measured in the energy range from 5 to 48 MeV. The cross sections are compared with available theories based on a direct Coulomb ionization mechanism and with the predictions of theK-vacancy sharing process. This last process can reasonably account for the measured cross sections at high bombarding energies. The energy shifts of theK - andK -lines and theK /K -intensity ratios have also been measured. This information is used to deduce the defect configuration of the atoms. The mechanisms responsible for the multiple vacancy production are discussed.     

Development of a nanostructured filter for pyrolysis wax purification:Effects of particulate filter aids

Wax obtained from the pyrolysis of polyethylene waste can contain inorganic contaminants and must be purified before application.We evaluated different filter aids(perlite,sand,and rice husk ash)for the filtration of a crude wax and a pyrolysis wax through a filter medium that was coated with nylon 6 nanofibers to improve filtration efficiency.We first examined the performance of the filter aids in improving crude wax filtration,with the filtration time,temperature,and pressure held constant at 1 h,170℃,and 2.5 bar,respectively.Oily wax was then produced by pyrolysis of high-density polyethylene(HDPE)waste in the temperature range 425-475℃.The best filter aid was perlite,which had a filtrate production rate of 5.47×10^-5m³/h.The highest oily wax yield(87.8%)was achieved at a pyrolysis temperature of 425℃.The assembly comprising the filter medium coated with nylon 6 nanofibers plus perlite as a filter aid was most suitable for removing impurities from the oily wax generated by the HDPE pyrolysis as it achieved a purification efficiency of 99.9%.     

Selective CO2 reduction into formate using Ln-Ta oxynitrides combined with a binuclear Ru(Ⅱ)complex under visible light

Hybrid materials constructed from a visible-light-absorbing semiconductor and a functional metal complex have attracted attention as efficient photocatalysts for CO₂ reduction with high selectivity to a desired product.In this work,defect fluorite-type Ln-Ta oxynitrides LnTaO_xN_y(Ln=Nd,Sm,Gd,Tb,Dy and Ho)were examined as the semiconductor component in a hybrid photocatalyst system combined with known Ag nanoparticle promoter and binuclear ruthenium(Ⅱ)complex(RuRu’).Among the LnTaO_xN_y examined,TbTaO_xN_y gave the highest performance for CO₂ reduction under visible light(k>400 nm),with a Ru Ru0-based turnover number of 18 and high selectivity to formate(>99%).Physicochemical analyses indicated that high crystallinity and more negative conduction band potential of Ln Ta O_xN_ywith the absence of Ln-4 f states in the band gap structure contributed to higher activity of the hybrid photocatalyst.     

Preparation of CdO nanoparticles by mechanochemical reaction

CdO nanoparticles of 43 nm in crystal size were successfully synthesized by the mechanochemical reaction (CdCl₂ + Na₂CO₃) with NaCl as a diluent and subsequent thermal treatment at 700°C for 2 h. The samples were characterized by differential thermal analysis (DTA), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). Effect of calcination temperature on the crystal size of CdO nanoparticles was primarily investigated. The apparent activation energy of CdO nanoparticle formation during thermal treatment was calculated to be 12.2 kJ/mol.     

Spectral Properties and Solubilization Location of 2'-Ethylhexyl 4-(N,N-Dimethylamino)benzoate in Micelles

在阳离子、非离子和阴离子表面活性剂胶束溶液中,研究了4-(N,N-二甲氨基)苯甲酸2'-乙基己基酯(EHDMAB)的双重荧光和紫外吸收．当EHDMAB增溶在不同的胶束溶液中,紫外吸收增强,在离子型胶束溶液中,可观察到具有较长波长的EHDMAB分子内扭转电荷转移(TICT)荧光,相反,在非离子型胶束溶液中,可观察到具有较短波长TICT荧光,特别是位于阳离子胶束Stern层中的吡啶阳离子可强烈猝灭EHDMAB分子的双重荧光,所吸收的紫外辐射主要通过TICT荧光和非辐射去活化衰减．按照EHDMAB分子TICT荧光在有机溶剂中的极性依赖性,EHDMAB分子的4-(N,N-二甲氨基)在离子型胶束和非离子型胶束中处于不同的极性环境;根据EHDMAB和表面活性剂分子的结构和大小分析,EHDMAB分子的4-(N,N-二甲氨基)应朝向胶束的极性头基团,而2'-乙基己基链则朝向疏水性的胶束内核．动态荧光猝灭测量为EHDMAB分子在不同胶束中的位置进一步提供了佐证．     

Ultrasonic depolymerization of aqueous polyvinyl alcohol.

Ultrasonication has proved to be a highly advantageous method for depolymerizing macromolecules because it reduces their molecular weight simply by splitting the most susceptible chemical bond without causing any changes in the chemical nature of the polymer. Most of the effects involved in controlling molecular weight can be attributed to the large shear gradients and shock waves generated around collapsing cavitation bubbles. In general, for any polymer degradation process to become acceptable to industry, it is necessary to be able to specify the sonication conditions which lead to a particular relative molar mass distribution. This necessitates the identification of the appropriate irradiation power, temperature, concentration and irradiation time. According to the results of this study the reactors constructed worked well in depolymerization and it was possible to degrade aqueous polyvinyl alcohol (PVA) polymer with ultrasound. The most extensive degradation took place at the lowest frequency used in this study, i.e. 23 kHz, when the input power was above the cavitation threshold and at the lowest test concentration of PVA, i.e. 1% (w/w). Thus this study confirms the general assumption that the shear forces generated by the rapid motion of the solvent following cavitational collapse are responsible for the breakage of the chemical bonds within the polymer. The effect of polymer concentration can be interpreted in terms of the increase in viscosity with concentration, causing the molecules to become less mobile in solution and the velocity gradients around the collapsing bubbles to therefore become smaller.     

Studies on adhesion characteristics and corrosion behaviour of vinyltriethoxysilane/epoxy coating protective system on aluminium

The corrosion stability of vinyltriethoxysilane/epoxy coating protective system on aluminium is strongly related to the strength of bonds forming at the metal/organic coating interface. This article is a study of adhesion, composition, electrochemical and transport properties of epoxy coatings electrodeposited on bare aluminium and aluminium pretreated by vinyltriethoxysilane (VTES) during exposure to 3% NaCl. The VTES film was deposited on aluminium surface from 2% vinyltriethoxysilane solution during 30 s. From the values of adhesion strength (pull-off test), time dependence of pore resistance and coating capacitance of epoxy coating (impedance measurements) and diffusion coefficient of water through epoxy coating (gravimetric liquid sorption measurements), the influence of VTES sublayer on the corrosion stability of the electrodeposited epoxy coating was shown.The work discusses the role of the VTES pretreatment in the enhanced adhesion and corrosion stability of epoxy cataphoretic coating. The electrochemical results showed that the aluminium pretreatment by VTES film improved barrier properties of epoxy coating (greater pore resistance and lower coating capacitance). The lower value of diffusion coefficient of water through epoxy coating indicates the lower porosity, while the smaller adhesion reduction points to better adhesion of epoxy coating on aluminium pretreated by VTES film. The composition of the deposited coatings investigated by XPS enabled the clarification of the bonding mechanism.     

Modeling the interaction of solitary waves and semi-circular breakwaters by using unsteady reynolds equations

A vertical 2 -D numerical wave model was developed based on unsteady Reynolds equations. In this model, the k-epsilon models were used to close the Reynolds equations, and volume of fluid( VOF) method was used to reconstruct the free surface. The model was verified by experimental data. Then the model was used to simulate solitary wave interaction with submerged, alternative submerged and emerged semi-circular breakwaters. The process of velocity field, pressure field and the wave surface near the breakwaters was obtained. It is found that when the semi-circular breakwater is submerged, a large vortex will be generated at the bottom of the lee side wall of the breakwater ; when the still water depth is equal to the radius of the semi-circular breakwater, a pair of large vortices will be generated near the shoreward wall of the semi-circular breakwater due to wave impacting, but the velocity near the bottom of the lee side wall of the breakwater is always relatively small. When the semi-circular breakwater is emerged, and solitary wave cannot overtop it, the solitary wave surface will run up and down secondarily during reflecting from the breakwater. It can be further used to estate the diffusing and transportation of the contamination and transportation of suspended sediment.