Preparation and characterization of individual peptide-wrapped single-walled carbon nanotubes

Two challenges for effectively exploiting the remarkable properties of single-walled carbon nanotubes (SWNTs) are the isolation of intact individual nanotubes from the raw material and the assembly of these isolated SWNTs into useful structures. In this study, we present atomic force microscopy (AFM) evidence that we can isolate individual peptide-wrapped SWNTs, possibly connected end-to-end into long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Transmission electron microscopy (TEM) and well-resolved absorption spectral features further corroborate nano-1's ability to debundle SWNTs in aqueous solution. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions, was observed in the AFM and TEM images.     

Chiral bifunctional organocatalysts bearing a 1,3-propanediamine unit for the aza-MBH reaction

The introduction of a 1,3-propanediamine unit at the 3-position of (S)-BINOL using a methylene spacer led to the formation of a chiral bifunctional organocatalyst for the aza-Morita–Baylis–Hillman (aza-MBH) reaction. The organocatalyst 1k mediated aza-MBH transformations with high chemical yields and with up to 82% ee.     

Synthesis and polymerization of coupled compounds of 1,11-dodecadiyne

The dimer, trimer, and tetramer of 1,11-dodecadiyne, HC?C? (CH₂)₈? C?CH, were synthesized. The solid-state polymerization of the dimer was investigated by infrared (IR) spectroscopy. IR bands due to the diacetylene moiety were identified through the comparison of the IR spectra of the dimer, trimer, and tetramer. The dimer was found to have two polymorphs, melt-crystallized and solution-crystallized. Both of the polymorphs undergo solid-state polymerization by exposure to γ-ray or UV irradiation. The former has higher polymerizability for the diacetylene moiety than the latter. The solid-state polymerization of the terminal acetylene group was not observed. It is shown that the previously reported dimer structure in which both the diacetylene and terminal acetylene groups are polymerized to form an inherently electrically conducting polymer is incorrect. © 1995 John Wiley & Sons, Inc.     

Anodic cyanation of 1-methylpyrazole

The electrooxidation of 1-methylpyrazole in methanol containing sodium cyanide produced 1-methyl-pyrazole-4-carbonitrile 2 and ?5-carbonitrile 3 in yields of 23 and 8%, respectively (2e-oxidation products), together with 4-methoxy-1-methylpyrazole-5-carbonitrile 4 (4e-oxidation product, 4%).     

Control of the Orientation and Photoinduced Phase Transitions of Macrocyclic Azobenzene

Photoinduced phase transitions caused by photochromic reactions bring about a change in the state of matter at constant temperature. Herein, we report the photoinduced phase transitions of crystals of a photoresponsive macrocyclic compound bearing two azobenzene groups ( 1 ) at room temperature on irradiation with UV (365 nm) and visible (436 nm) light. The trans/trans isomer undergoes photoinduced phase transitions (crystal–isotropic phase–crystal) on UV light irradiation. The photochemically generated crystal exhibited reversible phase transitions between the crystal and the mesophase on UV and visible light irradiation. The molecular order of the randomly oriented crystals could be increased by irradiating with linearly polarized visible light, and the value of the order parameter was determined to be ?0.84. Heating enhances the thermal cis‐to‐trans isomerization and subsequent cooling returned crystals of the trans/trans isomer.     

Coloring–decoloring behavior of fluoroalkyl end‐capped 2‐acrylamido‐2‐methylpropanesulfonic acid oligomer/acetone composite in methanol

A reddish‐brown fluoroalkyl end‐capped 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) oligomer/acetone composite was prepared by heating the white oligomer powder with acetone at 80 °C for 3 h. The color was not observed in the corresponding non‐fluorinated AMPS oligomer/acetone composite, which was prepared under similar conditions. The coloring was probably caused by the formation of acetone polyaldol condensation products in the fluorinated oligomeric gel network cores. The colored R_F‐(AMPS)_n‐R_F/acetone composite powders were stable and did not exhibit any color change after 2 years in natural light at room temperature. The colored composite powders dissolved in methanol to give a reddish‐brown solution at room temperature. However, the retro‐polyaldol condensation decolored the solution after 1 day at room temperature. This is the first example of the retro‐aldol polycondensation of acetone under mild conditions. The decoloration increased by between 38‐ and 70‐fold under UV irradiation, compared with that in dark conditions. The coloring–decoloring behavior was consistent and repeatable; therefore our fluorinated oligomer/acetone composites are promising candidates for new fluorinated coloring materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2555–2564     

Determination of129I and127I in environmental samples by neutron activation analysis (NAA) and inductively coupled plasma mass spectrometry (ICP-MS)

In order to assess the levels and behavior of¹²⁹I (half-life: 1.6×10⁷ y) and¹²⁷I (stable) in the environment, we have developed analytical procedures involving neutron activation analysis (NAA). Environmental samples collected around Tokaimura, Ibaraki Prefecture, Japan, have been analyzed using this method. Ranges of¹²⁹I and¹²⁷I concentrations in surface soil were 0.9–180 mBq kg^–1 and 1–60 mg kg^–1, respectively. Higher¹²⁹I concentrations were found in soil samples collected from coniferous forests, suggesting a contribution from tree canopies in the deposition of this nuclide. Most of the¹²⁹I in soil, was found to be retained in the first 10 cm. The¹²⁹I/¹²⁷I ratios in wheat fields were lower than those in rice paddy fields.A soil sample collected by IAEA from an area contaminated by the Chemobyl accident was also determined. The¹²⁹I concentration and the¹²⁹I/¹²⁷I ratio were 1.6 mBq kg^–1 and 1.7×10^–7, respectively. The¹²⁹I level in this sample was higher than the values obtained in areas far from nuclear facilities in Japan. It was suggested that the analysis of¹²⁹I in soils in the Chernobyl area may be useful in evaluating the¹³¹I levels at the time of the accident.Analyses of¹²⁹I and¹²⁷I by ICP-MS in water samples were also made. The analytical speed of this method was very high, i.e., 3 minutes for a sample. However, there is a sensitivity limitation for¹²⁹I detection due to interference from¹²⁹Xe with the¹²⁹I peak. The detection limits for¹²⁹I and¹²⁷I in water samples were about 0.5 mBq ml^–1 and 0.1 ng ml^–1, respectively.     

Effects of type of adsorption isotherms on parallel diffusion of sulfonated dyes into porous cellulose membrane

Transport phenomenon of three sulfonated azo dyes, C.I. Acid Red 88, C.I. Direct Yellow 12, and C.I. Direct Blue 15 into water-swollen cellulose membranes has been analyzed on the basis of parallel transport theory by surface and pore diffusion. Langmuir equation was applied into the mass balance equation to estimate dye concentration in the pores. The results were compared with the results obtained by applying Freundlich equation in our previous papers. The surface diffusivity (D _s) and the pore diffusivity (D _p) for the parallel diffusion model obtained by applying Langmuir equation agreed with those obtained by applying Freudlich equation. The theoretical concentration profiles for parallel diffusion calculated usingD _s andD _p coincided accurately with the experimental data when we applied either Langmuir or Freundlich equations.     

Electrocatalytic Oxidation of Amines on a Mediator‐Modified Electrode by Electrochemical Copolymerization of Nitroxyl Radical Precursor Containing Pyrrole Side Chain and Bithiophene

This paper describes the electrocatalytic oxidation of amines on TEMPO (2,2,6,6‐tetramethylpiperidine‐1‐oxyl)‐modified electrodes prepared by electrochemical copolymerization of TEMPO precursor containing pyrrole side chain and 2,2′‐bithiophene. The modified electrode exhibits electrocatalytic activity for the oxidation of primary and secondary amines. Cyclic voltammetric studies showed that the peak current of the cyclic voltammogram increased linearly with increasing concentration of amine in the sample solution.