One tool to bring them all: Au-catalyzed synthesis of B,O- and B,N-doped PAHs from boronic and borinic acids

The isoelectronic replacement of C C bonds with ⁻B N⁺ bonds in polycyclic aromatic hydrocarbons (PAHs) is a widely used tool to prepare novel optoelectronic materials. Far less well explored are corresponding B,O-doped PAHs, although they have a similarly high application potential. We herein report on the modular synthesis of B,N- and B,O-doped PAHs through the [Au(PPh₃)NTf₂]-catalyzed 6-endo-dig cyclization of BN–H and BO–H bonds across suitably positioned C C bonds in the key step. Readily available, easy-to-handle o-alkynylaryl boronic and borinic acids serve as starting materials, which are either cyclized directly or first converted into the corresponding aminoboranes and then cyclized. The reaction even tolerates bulky mesityl substituents on boron, which later kinetically protect the formed B,N/O-PAHs from hydrolysis or oxidation. Our approach is also applicable for the synthesis of rare doubly B,N/O-doped PAHs. Specifically, we prepared 1,2-B,E-naphthalenes and -anthracenes, 1,5-B₂-2,6-E₂-anthracenes (E = N, O) as well as B,O₂-containing and unprecedented B,N,O-containing phenalenyls. Selected examples of these compounds have been structurally characterized by X-ray crystallography; their optoelectronic properties have been studied by cyclic voltammetry, electron spectroscopy, and quantum-chemical calculations. Using a new unsubstituted (B,O)₂-perylene as the substrate for late-stage functionalization, we finally show that the introduction of two pinacolatoboryl (Bpin) substituents is possible in high yield and with perfect regioselectivity via an Ir-catalyzed C–H borylation approach.

Singly and doubly B,E-doped PAHs were synthesized using a protocol that starts from easy-to-handle boronic and borinic acids and offers the possibility to choose between the preparation of B,O- and B,N-PAHs in the final reaction step.     

Kinetics and mechanism of oxidation of chromium(III)-tetraoxalylurea complex by periodate

A novel chromium(III) complex of tetraoxalylurea was prepared. In aqueous solutions, [Cr^III(H₂L)(H₂O)]⁺ (H₂L = diprotonated tetraoxalylurea) is oxidized by IO ₄ ^– according to the rate law

Strategies for hydrogen storage in metal--organic frameworks

Increased attention is being focused on metal-organic frameworks as candidates for hydrogen storage materials. This is a result of their many favorable attributes, such as high porosity, reproducible and facile syntheses, amenability to scale-up, and chemical modification for targeting desired properties. A discussion of several strategies aimed at improving hydrogen uptake in these materials is presented. These strategies include the optimization of pore size and adsorption energy by linker modification, impregnation, catenation, and the inclusion of open metal sites and lighter metals.     

Characterization of H2 binding sites in prototypical metal-organic frameworks by inelastic neutron scattering

The hindered rotor transitions of H(2) adsorbed in the chemically related and prototypical porous metal-organic frameworks IRMOF-1, IRMOF-8, IRMOF-11, and MOF-177 were studied by inelastic neutron scattering to gain information on the specifics of H(2) binding in this class of adsorbents. Remarkably sharp and complex spectra of these materials signify a diversity of well-defined binding sites. Similarities in the spectral features as a function of H(2) loading and correlations with recent crystallographic studies were used to assign transitions ranging in rotational barrier from <0.04 to 0.6 kcal/mol as corresponding to localized adsorption sites on the organic and inorganic components of these frameworks. We find that binding of H(2) at the inorganic cluster sites is affected by the nature of the organic link and is strongest in IRMOF-11 in accord with our adsorption isotherm data. The sites on the organic link have lower binding energies, but a much greater capacity for increases in H(2) loading, which demonstrates their importance for hydrogen uptake by these materials.     

Synthesis, characterization and biological activity of some transition metals with Schiff base derived from 2-thiophene carboxaldehyde and aminobenzoic acid

Metal complexes of Schiff base derived from 2-thiophene carboxaldehyde and 2-aminobenzoic acid (HL) are reported and characterized based on elemental analyses, IR, 1H NMR, solid reflectance, magnetic moment, molar conductance and thermal analysis (TGA). The ligand dissociation as well as the metal-ligand stability constants were calculated pH metrically at 25 degrees C and ionic strength mu=0.1 (1M NaCl). The complexes are found to have the formulae [M(HL)2](X)n.yH2O (where M=Fe(III) (X=Cl, n=3, y=3), Co(II) (X=Cl, n=2, y=1.5), Ni(II) (X=Cl, n=2, y=1) and UO2(II) (X=NO3, n=2, y=0)) and [M(L)2] (where M=Cu(II) (X=Cl) and Zn(II) (X=AcO)). The molar conductance data reveal that Fe(III) and Co(II), Ni(II) and UO2(II) chelates are ionic in nature and are of the type 3:1 and 2:1 electrolytes, respectively, while Cu(II) and Zn(II) complexes are non-electrolytes. IR spectra show that HL is coordinated to the metal ions in a terdentate manner with ONS donor sites of the carboxylate O, azomethine N and thiophene S. From the magnetic and solid reflectance spectra, it is found that the geometrical structure of these complexes are octahedral. The thermal behaviour of these chelates shows that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The activation thermodynamic parameters, such as, E*, DeltaH*, DeltaS* and DeltaG* are calculated from the DrTG curves using Coats-Redfern method. The synthesized ligands, in comparison to their metal complexes also were screened for their antibacterial activity against bacterial species, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus pyogones and Fungi (Candida). The activity data show that the metal complexes to be more potent/antibacterial than the parent Schiff base ligand against one or more bacterial species.     

Emulsion liquid membrane extraction of fission products promoted by polyvalent and organic acids

Emulsion liquid membranes (ELM) with di-2-ethylhexylphosphoric acid in n-alkane, and dipicrylamine and cobalt(III) dicarbollide in nitrobenzene stabilized in double emulsions by SPAN 80/85 surfactant were used for preconcentration of radioactive fission products (¹³⁷Cs,⁹⁰Sr,¹³⁹Ce, and¹⁵²Eu) from slightly acidic nitrate solutions. The efficiency of sulfuric, phosphotungstic and silicotungstic acids as stripping agents, and picric acid as the bulky anion additive was investigated. A group separation of the fission products is possible by the ELM technique and can be considered for their removal from waste water solutions.     

Über siliciumaromatische Verbindungen. III. Trimethylsilyl- und Triphenylsilyl-substituierte Farbstoffe der Anthrachinonreihe

The influence of the presence of trimethylsilyl and triphenylsilyl groups in substituents of anthraquinone on the properties of anthraquinone vat, acid, and dispersion dyes was investigated.     

Activation of bismuth(III) derivatives in ionic liquids: novel and recyclable catalytic systems for Friedel-Crafts acylation of aromatic compounds

The activity of four bismuth(III) derivatives when employed as Friedel-Crafts catalysts for the acylation of aromatics was found to increase dramatically when dissolved in ionic liquids. Solutions of bismuth oxide or triflate in [emim][NTf(2)] and [bmim][NTf(2)] are the most efficient catalytic systems, with catalyst loading as low as 1% leading to clean, high-yielding acylation of a variety of benzene derivatives. These improved Friedel-Crafts catalytic systems can also be efficiently recycled as opposed to traditional systems. [reaction: see text]     

Increased enantioselectivity in the addition of diethylzinc to benzaldehyde by the use of chiral ligands containing the alpha-phenylethylamino group in combination with achiral ligands

Chiral ligands (S,S)-1, (S,S)-2, (S,S)-3, (S)-4, (S)-5, (S,S)-6, (S,S)-7, and (S,S)-8 turned out to be effective promoters in the enantioselective addition of diethylzinc to benzaldehyde. Interestingly, diamine (S,S)-3 and amino alcohols (S)-5 and (S,S)-7 induce the preferential formation of carbinol (R)-10 (unlike stereoinduction) whereas amido analogues (S,S)-2, (S)-4, and (S,S)-6 favor (S)-10 (like stereoinduction). Molecular modeling at the semiempirical PM3 level provided a reasonable interpretation based on conformational effects in the corresponding transition structures. Combinations of chiral ligands 1-8 with an achiral, flexible ligand (9) gave rise to an activated catalytic system that resulted in faster and higher yielding reactions. Furthermore, substantial increases in the observed enantiomeric excesses of product 10 confirmed the relevant role of achiral bis(sulfonamide) 9 as activator and "chiral environment amplifier".