Does the reagent gas influence collisional activation when performing in situ chemical ionization with an ion trap mass spectrometer?

Users of ion trap mass spectrometers frequently develop methods that associate chemical ionization with tandem mass spectrometry detection. With apparatus using internal ionization, the chemical reagent is present in the trap during the collision induced dissociation (CID) step and one may wonder if the reagent influences the fragmentation ratios in MS/MS. We report a comparison of the fragmentation ratios of protonated molecules when using the most common reagents (methane, ammonia, methanol, acetonitrile, isobutane) for performing in situ chemical ionization. Four molecules were chosen in the medical field to serve as models: alprazolam, diazepam, flunitrazepam and acetaminophen. In the non-resonant CID mode, the influence of the reagent mass is clearly seen in spite of its low partial pressure in the ion trap; the reagent acts as a "heavy target": the degree of fragmentation increases with the molecular weight of the reagent. In the resonant CID mode, there is no evident correlation between the fragmentation ratio of MH(+) ions and the nature of the CI reagent; a slight shift of the secular frequency of the precursor ion, which tends to reduce the CID efficiency, could compensate for the "heavy target" effect underscored in the non-resonant mode.     

Promising photoluminescence optical approach for triiodothyronine hormone determination based on smart copper metal–organic framework nanoparticles

A copper metal–organic framework nanoparticles (Cu‐MOF‐NPs) synthesized via simple technique. The prepared Cu‐MOF‐NPs nanoparticles were further characterized using ¹H‐NMR, FE‐SEM/EDX and thermal study (DSC/TGA). The FE‐SEM/EDX, thermal analysis, and NMR spectrum data with the other analysis support the nano‐Cu‐MOF structure and the monomeric unit (n[Cu (AIP)₂(APY)(H₂O)₂].4H₂O) of Cu‐MOF‐NPs. The photoluminescence (PL) studies of triiodothyronine hormone (T3) based on the prepared Cu‐MOF‐NPs investigated. The results revealed that the Cu‐MOF‐NPs might be used as a biosensor in the determination of triiodothyronine hormone (T3) in biological fluids through a significant quenching of the photoluminescence intensity of Cu‐MOF‐NPs at excitation wavelength 492 nm. The calibration plot achieved over the concentration range 0.0–200.0 ng/dL T3 hormone with a correlation coefficient 0.996 and limit of detection (LOD) and quantification (LOQ) 0.198 and 0.60 ng/dL, respectively. The PL spectra are indicating that Cu‐MOF‐NPs has highly selective sensing properties for T3 hormone without interfering with other human many hormones types. This approach considered a promising analytical tool for early diagnosis of the cases of thyroid disease. The mechanism of quenching between the Cu‐MOF‐NPs, and T3 hormone studied. The mechanism was a dynamic type and obtained due to the energy transfer mechanism.     

A novel nano‐size lanthanum metal–organic framework based on 5‐amino‐isophthalic acid and phenylenediamine: Photoluminescence study and sensing applications

In this paper, a novel lanthanum metal–organic framework La‐MOF was prepared via hydrothermal and reflux methods. The La‐MOF was achieved through the reaction of a 5‐amino‐isophthalic acid with 1, 2‐phenylenediamine and lanthanum chloride. The prepared La‐MOF structure was confirmed by XRD, mass spectrometry, IR, UV–Vis and elemental analysis, whereas the size, and morphology was examined by FE‐SEM/EDX and HR‐TEM. The results indicated that the La‐MOF prepared via both methods have the same structure and composition. Meanwhile, the MOF yield, reaction time, morphology, physiochemical and sensing properties were highly depended on the used preparation method. The photoluminescence (PL) study was carried out for the La‐MOF, and the results showed that La‐MOF exhibits strong emission at 558 nm after excitation at 369 nm. Moreover, the PL data indicating that the La‐MOF has highly selective sensing properties for iron (III) competing with different metal ions. The Stern‐Völmer graph shows a linear calibration curve which achieved over a concentration range 1.0–500 μM of Fe³⁺ with a correlation coefficient, detection, and quantitation limits 0.998, 1.35 μM and 4.08 μM, respectively. According to the remarkable quenching of the PL intensity of La‐MOF using various concentrations of Fe³⁺, it was successfully used as a sensor for Fe³⁺detecting in different water resources (pure and waste) samples. The quenching mechanism was studied and it has a dynamic type and due to efficient energy transfer between the La‐MOF and Fe³⁺.     

Characterization and catalytic performance of basaltic dust as an efficient catalyst in the liquid‐phase esterification of acetic acid with n‐butanol

Three natural basaltic samples were collected and used as efficient catalysts for the liquid‐phase synthesis of n‐butyl acetate. The samples were characterized by X‐ray fluorescence analysis (XRF), X‐ray diffraction (XRD), thermogravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared (FT‐IR), scanning electron microscopy (SEM), and N₂ sorption. The acidity of the samples was determined using isopropanol dehydration, and the strength of the acid sites was measured using chemisorption of basic probes. The catalytic activity of the samples towards the esterification of acetic acid with n‐butanol was extensively examined. The influence of different parameters, such as the reaction refluxing time, molar ratio, catalyst loading, reusability, and calcination temperature, on the esterification reaction was studied in detail. The results revealed that all samples had high catalytic activity with a selectivity of 100% to n‐butyl acetate formation. In addition, the sample obtained from the top hill of Volcano had the highest activity with a 80% yield of n‐butyl acetate. Moreover, the significant catalytic performances were well correlated with the acidity of the samples and to the reaction rate constants.     

Direct Synthesis of Multi‐functional Pyrimidine,Pyrazine, and Pyridine Scaffolds via Inter‐ and Intramolecular Annulations of 3‐Amino‐thieno[2,3‐b]pyridine‐2‐carboxylate

The synthesis of a new series of annulated thieno[2,3‐b]pyridines was performed. Ester compound 1 underwent heterocyclization upon reaction with phenylisothiocyanate and formamide to afford pyrimidines 2 and 3 , respectively. Thienopyrimidine 5 was resulted via reaction of amino derivative 1 with triethyl orthoformate to afford the non‐isolable intermediate 4 , which allowed hydrazinolysis with hydrazine hydrate to afford the target compound. Pyrimidine type 5 was condensed with p‐nitrobenzaldehyde to afford Schiff base 6 . Refluxing of ester 1 with ethyl cyanoacetate and diethyl malonate followed by base‐mediated heterocyclization afforded condensed pyridines 8 and 9 , respectively. The tetracyclic pyrazine derivative 14 was obtained from the reaction of amino compound 1 with 2,5‐dimethoxytetrahydrofuran followed by hydrazinolysis to give carbohydrazide 11 , which undergo diazotization followed by Curtius rearrangement. The antibacterial results illustrated no significant results for the investigated compounds except compound 5 , which has moderate activity against Gram‐positive bacteria.     

Glycerol: A Promising Benign Solvent for Catalyst‐free One‐pot Multi‐component Synthesis of 1H‐Pyrozolo[1,2‐b]phthalazine‐5,10‐diones and 2H‐Indazolo[2,1‐b]phthalazine‐triones Under Controlled Microwaves Irradiation

A simple green and efficient one‐pot multi‐component synthesis of 1H‐pyrozolo[1,2‐b]phthalazine‐5,10‐diones and 2H‐indazolo[2,1‐b]phthalazine‐triones has been developed utilizing one‐pot multi‐component reaction of aromatic aldehydes, active methylene reagents, phthalic anhydride, and hydrazine hydrate or alternatively phthalhydrazide in glycerol without catalyst under controlled microwave heating. The current synthetic protocol offers several advantages such as excellent yields, high EcoScale and atom economy, simple working up reactants and products, and the absence of hazardous catalysts or solvents.     

Traceless chemical ligations from O-acyl serine sites

Chemical ligation via O- to N-acyl transfer of O-acylated serine containing peptides affords serine containing native peptides via 8- and 11-membered cyclic transition states opening the door to a wide variety of potential applications to peptide elaboration. The feasibility of these traceless chemical ligations is feasible as supported by computation.     

Survey of Phenolic Acids,Flavonoids and In Vitro Antioxidant Potency Between Fig Peels and Pulps: Chemical and Chemometric Approach

In the present study, chromatic coordinates, phenolic acids, flavonoids and antioxidant capacity assessed by 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate (ABTS) and lipid peroxidation inhibition capacity (LPIC) essays and their relative IC50 were investigated in 25 fig cultivars growing in Morocco. The aims of this study were to determine (i) the variation in these compounds among light and dark-colored cultivars, (ii) their partitioning between fruit peel and pulp and (iii) to display network connections among these variables. Twelve phenolic compounds (PCs) were isolated in peel extract versus eight in pulp samples. Anthocyanins, mainly cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the predominant compounds in peels, where the mean concentrations were 75.90 ± 18.76 and 77.97 ± 18.95 µg/g dw, respectively. On the other hand, (−)-epicatechin and cyanidin-3-O-rutinoside were the major compounds in the pulp extracts, where the mean values were 5.23 ± 4.03 and 9.01 ± 5.67 µg/g dw, respectively. A two-dimensional hierarchically clustered heatmap was applied to the dataset to explore correlations in the dataset and similarities between cultivars, without dimensionality reduction. Results showed that anthocyanins, particularly pelargonidin-3-O-rutinoside, cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the main contributors to the peels’ free radical scavenging capacity. This capacity was particularly higher in the peel of dark-colored figs compared to the fruit pulp. The local cultivar “INRA 1301” showed the most promising phenolic profile due to its very high levels of almost all detected PCs, especially (−)-epicatechin, quercetin-3-O-rutinoside, quercetin-3-O-glucoside, cyanidine-3,5-diglucoside, cyanidine-3-O-rutinoside and pelargonidin-3-O-rutinoside (54.66, 141.08, 35.48, 494.08, 478.66, 12.56 µg/g dw, respectively). Having the darkest figs in the collection (L* = 25.72, c* = 22.09 and h° = 20.99), this cultivar has also combined promising IC50 values, which were of 19.85, 40.58 and 124.78 µg/mL for DPPH, ABTS and LPIC essays, respectively.     

Synthesis,characterisation and supramolecular interaction of Rh-biphenylic-imidazole-phenanthroline with antibiotics

A novel rhodium biphenylic imidazole phenanthroline metal-organic complex (BIP-MC) has been synthesised and characterised as a stable supramolecule. The structure of compound was established on the basis ESI, ¹H NMR and UV–vis spectroscopic data. The selectivity of BIP-MC as a new fluorescent chemosensor for various antibiotics has been explored. The supramolecular interaction of amoxicillin with BIP-MC enhanced the fluorescence activity of BIP-MC. A linear response of the sensor was observed in the measuring ranges of excitation 240–298 nm and emission 290–360 nm with detection limits of up to 10 μg/ml at an optimum pH 8.0. Based on the observations made here, a new quantitative method for the determination of this drug in synthetic samples without the use of separation of matrix is developed. It is also inferred that the possible fluorescence enhancement is due to the formation of exciplex between the BIP-MC and amoxicillin. These finding will thus help in pharmacokinetics studies of drugs. The sensor was used for the direct assay of amoxicillin antibiotic in commercial pharmaceutical preparations.