磁性Y-MOF@SiO2@Fe3O4催化剂的制备及其在Aza-Micheal加成反应中的性能

在磁性SiO₂@Fe₃O₄纳米微球表面原位合成包覆不同含量的Y-MOF,从而制备出新型磁性Y-MOF@SiO₂@Fe₃O₄催化剂。采用XRD、TEM、FT-IR、VSM和N₂吸附-脱附测试等手段对催化剂的结构进行表征,并且评价了催化剂对苯胺和丙烯酸甲酯的Aza-Micheal加成反应性能。结果表明Y-MOF能均匀包覆在磁性SiO₂@Fe₃O₄纳米微球表面,形成具有核壳结构的磁性Y-MOF@SiO₂@Fe₃O₄催化剂,催化剂具有良好的超顺磁性。Y-MOF含量为43.3%（w/w）的Y-MOF@SiO₂@Fe₃O₄催化剂,在苯胺和丙烯酸甲酯的Aza-Micheal加成反应表现出最好的催化性能,丙烯酸甲酯的转化率为88.3%时,N-（β-甲氧碳酰乙基）苯胺的选择性可达99.8%。反应后的催化剂可以通过外磁场容易回收,并且重复使用5次其转化率和选择性没有明显下降。     

Fly ash supported NiO as an efficient catalyst for the synthesis of xanthene and its molecular docking study against plasmodium glutathione reductase

A novel fly ash supported NiO (FA–NiO) nanocomposite solid heterogeneous catalyst has been prepared by impregnation of Ni(NO₃)₂ · 6H₂O on thermally activated fly ash (FA) support. FT-IR spectroscopy, X-ray diffraction analysis, scanning electron microscopy, TEM and BET techniques were employed to characterize the catalyst. The catalytic adeptness of FA–NiO was tested and optimized in xanthene formation. Catalyst gave very high yield and good purity. Stability of the catalyst could be promising as it easily recovered and reused giving a similar yield up to four cycles. FA–NiO is an efficient catalyst providing an environmentally clean process for xanthene formation and for developing a revolutionary way to use the majority of waste fly ash. Further, we have also performed docking simulation between 1ONF and a xanthene molecule to evaluate binding orientation and affinity of the ligand.     

Pyrolysis-controlled synthesis and magnetic properties of sol–gel electrospun nickel cobaltite nanostructures

Poly(chloropropyl-methyl)silsesquioxanes (PCMSQ) were prepared using the base catalyzed sol–gel processing on methyltrimethoxysilane (MTMS) and 3-chloropropyltriethoxysilane (CPTES) with 5:5, 6:4, and 7:3 molar ratios in methanol and water. The PCMSQ with 6:4 molar ratio of MTMS:CPTES, which has the maximum yield, according to the elemental analysis, was chosen and some chlorine atoms of the chloropropyl groups were changed to different amines by refluxing it with ethylenediamine (en), diethylenetriamine (dien), ortho-phenylenediamine (opda), and 2-imidazolidinethion (imt). The amine grafted PCMSQ were then used to support MoO₂(acac)₂ complex and dien grafted PCMSQ with higher metal content was applied to the epoxidation of cis-cyclooctene with TBHP. The product yields were studied by gas liquid chromatography and the catalytic procedure was optimized for the parameters involved such as the solvent and oxidant. The catalytic activity of this catalyst also was investigated toward epoxidation of some other alkenes. It was also applied to check its reuse ability.

Open image in new window

In this research, micro-spherical poly-organo-silsesquioxane was prepared using the base catalyzed sol–gel processing of methyltrimethoxysilane and 3-chloropropyltriethoxysilane with different molar ratios. The sample which has the maximum yield, was used to graft MoO₂(acac)₂ and for the successful anchoring, some chlorine atoms of the chloropropyl side groups were changed to amines. Then the prepared catalyst with higher molybdenum content was used for the epoxidation of cis-cyclooctene and some other alkenes with TBHP.

     

Enantioselective Synthesis of (−)‐Halenaquinone

The efficient, 12–14 step (LLS) total synthesis of (?)‐halenaquinone has been achieved. Key steps in the synthetic sequence include: (a) proline sulfonamide‐catalyzed, Yamada–Otani reaction to establish the C6 all‐carbon quaternary stereocenter, (b) multiple, novel palladium‐mediated oxidative cyclizations to introduce the furan moiety, and (c) oxidative Bergman cyclization to form the final quinone ring.     

Copper-catalyzed reaction of alkyl halides with cyclopentadienylmagnesium reagent

Treatment of alkyl halides, including tertiary alkyl bromides, with cyclopentadienylmagnesium bromide in the presence of a catalytic amount of copper(II) triflate yielded the corresponding cyclopentadienylated products in high yields. The following hydrogenation of the products provided alkyl-substituted cyclopentanes.     

A fluorescent fluoride ion probe based on a self-organized ensemble of 5-hydroxyflavone-Al(III) complex

In the presence of Al(III) ions, 5-hydroxyflavone (5HF) through a complexation reaction in MeOH, shows dual fluorescence, characterized by a newly developed peak at 554nm upon excitation at 363nm. In this communication, the subsequent ligand exchange reaction of the complex with fluoride ion causing a fluorescence enhancement followed by a decrease in fluorescence intensity involving an intermediate mechanistic pathway, delivering a quantitative estimation route for fluoride ion in the concentration range from 5x10(-5) to 7x10(-4)M, has been reported. The ligand exchange reaction, without interference from other common anions, has been investigated by UV-vis and fluorescence spectroscopies combined with the AM1 semi-empirical self-consistent field quantum chemical calculations within UHF formalism in their ground state.     

An Efficient synthesis of pyrimido[4,5‐b]quinoline and indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine derivatives via multicomponent reactions in ionic liquid

A series of pyrimido[4,5‐b]quinoline and indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine derivatives were synthesized via the three‐component reaction of an aldehyde, 6‐aminopyrimidine‐2,4‐dione and 5,5‐dimethyl‐1,3‐cyclohexanedione or 1,3‐indanedione in ionic liquid 1‐n‐butyl‐3‐methylimidazolium bromide ([bmim]Br). This protocol has the advantages of easier work‐up, milder reaction conditions, high yields and an environmentally benign procedure compared with other methods.     

Stability and bonding of carbon(0)-iron−N2 complexes relevant to nitrogenase co-factor: EDA-NOCV analyses

The factors/structural features which are responsible for the binding, activation and reduction of N₂ to NH₃ by FeMoco of nitrogenase have not been completely understood well. Several relevant model complexes by Holland et al. and Peters et al. have been synthesized, characterized and studied by theoretical calculations. For a matter of fact, those complexes are much different than real active N₂-binding Fe-sites of FeMoco, which possesses a central C(4-) ion having an eight valence electrons as an μ₆-bridge. Here, a series of [(S₃C(0))Fe(II/I/0)-N₂]^n- complexes in different charged/spin states containing a coordinated σ- and π-donor C(0)-atom which possesses eight outer shell electrons [carbone, (Ph₃P)₂C(0); Ph₃P→C(0)←PPh₃] and three S-donor sites (i.e. ^-S-Ar), have been studied by DFT, QTAIM, and EDA-NOCV calculations. The effect of the weak field ligand on Fe-centres and the subsequent N₂-binding has been studied by EDA-NOCV analysis. The role of the oxidation state of Fe and N₂-binding in different charged and spin states of the complex have been investigated by EDA-NOCV analyses. The intrinsic interaction energies of the Fe−N₂ bond are in the range from −42/−35 to −67 kcal/mol in their corresponding ground states. The S₃C(0) donor set is argued here to be closer to the actual coordination environment of one of the six Fe-centres of nitrogenase. In comparison, the captivating model complexes reported by Holland et al. and Peter et al. possess a stronger π-acceptor C-ring (S₂C_ring donor, π-C donor) and stronger donor set like CP₃ (σ-C donor) ligands, respectively.     

Genetic Fusion of Thermoresponsive Polypeptides with UCST-type Behavior Mediates 1D Assembly of Coiled-Coil Bundlemers

Thermoresponsive resilin-like polypeptides (RLPs) of various lengths were genetically fused to two different computationally designed coiled coil-forming peptides with distinct thermal stability, to develop new strategies to assemble coiled coil peptides via temperature-triggered phase separation of the RLP units. Their successful production in bacterial expression hosts was verified via gel electrophoresis, mass spectrometry, and amino acid analysis. Circular dichroism (CD) spectroscopy, ultraviolet-visible (UV/Vis) turbidimetry, and dynamic light scattering (DLS) measurements confirmed the stability of the coiled coils and showed that the thermosensitive phase behavior of the RLPs was preserved in the genetically fused hybrid polypeptides. Cryogenic-transmission electron microscopy and coarse-grained modeling revealed that functionalizing the coiled coils with thermoresponsive RLPs leads to their thermally triggered noncovalent assembly into nanofibrillar assemblies.     

Advancing MXene Electrocatalysts for Energy Conversion Reactions: Surface,Stoichiometry, and Stability

MXenes, due to their tailorable chemistry and favourable physical properties, have great promise in electrocatalytic energy conversion reactions. To exploit fully their enormous potential, further advances specific to electrocatalysis revolving around their performance, stability, compositional discovery and synthesis are required. The most recent advances in these aspects are discussed in detail: surface functional and stoichiometric modifications which can improve performance, Pourbaix stability related to their electrocatalytic operating conditions, density functional theory and advances in machine learning for their discovery, and prospects in large scale synthesis and solution processing techniques to produce membrane electrode assemblies and integrated electrodes. This Review provides a perspective that is complemented by new density functional theory calculations which show how these recent advances in MXene material design are paving the way for effective electrocatalysts required for the transition to integrated renewable energy systems.