Divergent Total Synthesis of Atisane‐Type Diterpenoids

Atisane‐type diterpenoids are the principal constituent of tetracyclic C₂₀‐diterpenoids, widely isolated from the plant kingdom with varying degrees of structural complexity and pharmacological activity. The tetracarbocyclic system with the unique bicyclo[2.2.2]octane skeleton of this natural product family has generated interest within the synthetic community. Divergent total synthesis is an effective tactic to synthesize several atisane‐type diterpenoids using structural interconversion from a common intermediate. This account summarizes the divergent total synthesis of atisane‐type diterpenoids.     

Multiple Response Optimization of a HPLC Method for the Determination of Enantiomeric Purity of S-Ofloxacin

The aim of the study was to develop a new HPLC method for direct chiral separation of Ofloxacin enantiomers using polar non-aqueous mobile phase by application of response surface methodology. Rotatable central composite design (CCD) with eight factorial points, six axial points and six replications in central point was used to evaluate the influence of three independent variables (concentration of methanol, diethylamine and flow rate) on the output responses (capacity factor of first peak, tailing factors of both the enantiomers, resolution between the Ofloxacin enantiomers, retention time of the last peak and chromatographic optimization function). Further, CCD data were combined with multiple response optimization in order to obtain a set of optimal experimental conditions (% methanol/hexane/acetonitrile-43.33/10/46.62 (v/v), % acetic acid/diethylamine-0.4/0.2 and flow rate as 1.4 mL min^?1) leading to the most desirable compromise between resolution and analysis time. The method demonstrated good correlation between observed and predicted responses. The developed method was validated according to ICH guidelines and applied for quantitative analysis of two commercially available tablets Zenoflox (Ofloxacin) and Glevo (Levofloxacin). Good agreement was found between the assay results and the label claim of the marketed formulations by showing good %recovery and %CV. The study resulted in a better chromatographic system for the determination of Ofloxacin enantiomers.     

Synthesis and Antimicrobial Activity of Amido Sulfonamido Methane Linked Bisoxazoles,Bisthiazoles, and Bisimidazoles

A new class of amido sulfonamido methane linked bisoxazoles, bisthiazoles, and bisimidazoles were prepared adopting simple and versatile synthetic methodologies. The lead compounds were assayed for antimicrobial activity.     

Syntheses of New Unsymmetrical 2,5‐Disubstituted‐1,3,4‐oxadiazoles and 1,2,4‐Triazolo[3,4‐b]‐1,3,4‐thiadiazoles Bearing Thieno[2,3‐c]pyrazolo Moiety

New series of (thieno[2,3‐c]pyrazolo‐5‐yl)‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazoles 10a , 10b , 10c and (thieno[2,3‐c]pyrazol‐5‐yl)‐1,3,4‐oxadiazol‐3(2H)‐yl)ethanones 6a , 6b , 6c has been synthesized from thieno[2,3‐c]pyrazole‐5‐carbohydrazide 3 by multistep reaction sequence. (5‐Aryl‐1,3,4‐oxadiazol‐2‐yl)‐1H‐thieno[2,3‐c]pyrazoles 4a , 4b , 4c were also synthesized from thieno[2,3‐c]pyrazole‐5‐carbohydrazide 3 by cyclization with various aromatic carboxylic acids. The hydrazide 3 was obtained by reaction of thieno[2,3‐c]pyrazole‐5‐carboxylate 2 with hydrazine hydrate in good yield, and compound 2 was obtained by the reaction of 5‐chloro‐3‐methyl‐1‐phenyl‐1H‐pyrazole‐4‐carbaldehyde 1 and 2‐ethyl thioglycolate in presence of sodium alcoholate in good yield.     

New Synthesis and Reactions of Ethyl 5‐amino‐4‐cyano‐1‐phenyl‐1H‐pyrazole‐3‐carboxylate

Synthesis of ethyl 5‐amino‐4‐cyano‐1‐phenyl‐1H‐pyrazole‐3‐carboxylate 5 has been achieved via abnormal Beckmann rearrangement of o‐chloroaldehyde 1 . Reaction of o‐aminocarbonitrile 5 with concentrated H₂SO₄ furnished expected o‐aminocarboxamide pyrazole 6 . Key intermediates o‐aminocarbonitrile 5 and o‐aminocarboxamide 6 were successfully utilized for the synthesis of pyrazolopyrimidine derivatives. The replacement of Cl in o‐chlorocarbonitrile 3 with secondary amine furnished new synthon 13 , which was further used for the synthesis of polysubstituted heterocycles. The obtained new products were well characterized by IR, ¹H and ¹³C NMR, and mass spectra.     

Synthesis and Antimicrobial Activities of Novel Series of 3‐(4‐(2‐substituted thiazol‐4‐yl)phenyl)‐2‐(4‐methyl‐2‐substituted thiazol‐5‐yl)thiazolidin‐4‐one Derivatives

In the present investigation, a novel series of 3‐(4‐(2‐substituted thiazol‐4‐yl)phenyl)‐2‐(4‐methyl‐2‐substituted thiazol‐5‐yl)thiazolidin‐4‐one derivatives were synthesized by condensation of 2‐substituted‐4‐methylthiazole‐5‐carbaldehyde with 4‐(2‐substituted thiazol‐4‐yl)benzenamine followed by cyclo‐condensation with thioglycolic acid in toluene. All the newly synthesized compounds were characterized by spectral (IR, ¹H NMR, ¹³C NMR, and Mass) methods. The title compounds were screened for quantitative antibacterial activity (minimal inhibitory concentration). All compounds 7a , 7b , 7c , 7d , 7e , 7f , 7g , 7h and 8a , 8b , 8c , 8d , 8e , 8f , 8g , 8h show moderate to good antimicrobial activity, whereas compounds ( 7a , 7b , 7c , 7d , 7e , 7f , 7g , 7h ) also show moderate antifungal activity.     

Highly aminated mesoporous silica nanoparticles with cubic pore structure

Mesoporous silica with cubic symmetry has attracted interest from researchers for some time. Here, we present the room temperature synthesis of mesoporous silica nanoparticles possessing cubic Pm3?n symmetry with very high molar ratios (>50%) of 3-aminopropyl triethoxysilane. The synthesis is robust allowing, for example, co-condensation of organic dyes without loss of structure. By means of pore expander molecules, the pore size can be enlarged from 2.7 to 5 nm, while particle size decreases. Adding pore expander and co-condensing fluorescent dyes in the same synthesis reduces average particle size further down to 100 nm. After PEGylation, such fluorescent aminated mesoporous silica nanoparticles are spontaneously taken up by cells as demonstrated by fluorescence microscopy.     

Chemical reactions modulated by mechanical stress: extended Bell theory

A number of recent studies have shown that mechanical stress can significantly lower or raise the activation barrier of a chemical reaction. Within a common approximation due to Bell [Science 200, 618 (1978)], this barrier is linearly dependent on the applied force. A simple extension of Bell's theory that includes higher order corrections in the force predicts that the force-induced change in the activation energy will be given by -FΔR - ΔχF(2)∕2. Here, ΔR is the change of the distance between the atoms, at which the force F is applied, from the reactant to the transition state, and Δχ is the corresponding change in the mechanical compliance of the molecule. Application of this formula to the electrocyclic ring-opening of cis and trans 1,2-dimethylbenzocyclobutene shows that this extension of Bell's theory essentially recovers the force dependence of the barrier, while the original Bell formula exhibits significant errors. Because the extended Bell theory avoids explicit inclusion of the mechanical stress or strain in electronic structure calculations, it allows a computationally efficient characterization of the effect of mechanical forces on chemical processes. That is, the mechanical susceptibility of any reaction pathway is described in terms of two parameters, ΔR and Δχ, both readily computable at zero force.     

Diterpene glycosides from Stevia rebaudiana

Three novel diterpene glycosides were isolated for the first time from the commercial extract of the leaves of Stevia rebaudiana, along with several known steviol glycosides, namely stevioside, rebaudiosides A-F, rubusoside and dulcoside A. The new compounds were identified as 13-[(2-O-β-D-glucopyranosyl-3-O-β-D-glucopyranosyl-β-D-glucopyranosyl)oxy] ent-kaur-15-en-19-oic acid, 13-[(2-O-β-D-glucopyranosyl-3-O-β-D-glucopyranosyl-β-D-glucopyranosyl)oxy]-16β-hydroxy-ent-kauran-19-oic acid and 13-methyl-16-oxo-17-nor-ent-kauran-19-oic acid-β-D-glucopyranosyl ester on the basis of extensive 2D NMR and MS spectroscopic data as well as chemical studies.     

Supramolecular polymerization from polypeptide-grafted comb polymers

The helical and tubular structures self-assembled from proteins have inspired scientists to design synthetic building blocks that can be "polymerized" into supramolecular polymers through coordinated noncovalent interactions. However, cooperative supramolecular polymerization from large, synthetic macromolecules remains a challenge because of the difficulty of controlling the structure and interactions of macromolecular monomers. Herein we report the synthesis of polypeptide-grafted comb polymers and the use of their tunable secondary interactions in solution to achieve controlled supramolecular polymerization. The resulting tubular supramolecular structures, with external diameters of hundreds of nanometers and lengths of tens of micrometers, are stable and resemble to some extent biological superstructures assembled from proteins. This study shows that highly specific intermolecular interactions between macromolecular monomers can enable the cooperative growth of supramolecular polymers. The general applicability of this strategy was demonstrated by carrying out supramolecular polymerization from gold nanoparticles grafted with the same polypeptides on the surface.