Optical Code Generating Device Using 1×N Asymmetric Hollow Waveguide Couplers

An optical code generating device for security access system application is presented. The code generating device constructed using asymmetric hollow optical waveguide coupler design provides a unique series of output light intensities which are successively used as an optical code. The design of the waveguide is made using two major components which are asymmetric Yjunction splitter and a linear taper. Waveguiding is done using a hollow waveguide structure. Construction of higher level 1×N hollow waveguide coupler is done utilizing a basic 1×2 asymmetric waveguide coupler design together with a cascaded design scheme. Nonsequential ray tracing of the asymmetric hollow optical waveguide couplers is performed to predict the optical transmission properties of the waveguide. A representation of the code combination that can be generated from the device is obtained using combinatory number theory.     

Electronic structure engineering of ZnO with the modified Becke–Johnson exchange versus the classical correlation potential approaches

In this study, we report investigations of structural and electronic properties of ZnO in wurtzite (WZ), rock salt (RS) and zinc-blende (ZB) phases. Calculations have been done with full-potential linearized augmented plane wave plus local orbital method developed within the frame work of Density Functional Theory (DFT). For structural properties investigations, Perdew and Wang proposed local density approximations (LDA) and Perdew et al. proposed generalized gradient approximations (GGA) have been applied. Where for electronic properties in addition to these, Tran–Blaha modified Becke–Johnson (mBJ) potential has been used. Our computed band gap values of ZnO in WZ and ZB phases with mBJ potential are significantly improved compared to those with LDA and GGA; however, in RS phase, energy gap is significantly overestimated compared to experimental measurements. The Zn-d band was found to be more narrower with mBJ potential than that of LDA and GGA. On the other hand, our evaluated crystal field splitting energy values overestimate the experimental values.     

Chemical Constituents from the Butanol Fraction of Clinacanthus nutans Leaves

Chemistry of Natural Compounds -     

Clitorienolactones and Isoflavonoids of Clitorea ternatea Roots Alleviate Stress-Like Symptoms in a Reserpine-Induced Zebrafish Model

Clitorea ternatea has been used in Ayurvedic medicine as a brain stimulant to treat mental illnesses and mental functional disorders. In this study, the metabolite profiles of crude C. ternatea root extract (CTRE), ethyl acetate (EA), and 50% aqueous methanol (50% MeOH) fractions were investigated using ultrahigh-performance liquid chromatography–diode array detector–tandem mass spectrometry (UHPLC–DAD–MS/MS), while their effect on the stress-like behavior of zebrafish, pharmacologically induced with reserpine, was investigated. A total of 32 compounds were putatively identified, among which, a series of norneolignans, clitorienolactones, and various flavonoids (flavone, flavonol, isoflavone, and isoflavanone) was found to comprise the major constituents, particularly in the EA and 50% MeOH fractions. The clitorienolactones, presently unique to the species, were present in both the free and glycosylated forms in the roots. Both the EA and 50% MeOH fractions displayed moderate effects on the stress-induced zebrafish model, significantly decreasing freezing duration and elevating the total distance travelled and average velocity, 72 h post-treatment. The results of the present study provide further evidence that the basis for the use of C. ternatea roots in traditional medicine to alleviate brain-related conditions, such as stress and depression, is attributable to the presence of clitorienolactones and the isoflavonoidal constituents.     

A curcumin derivative, 2,6-bis(2,5-dimethoxybenzylidene)-cyclohexanone (BDMC33) attenuates prostaglandin E2 synthesis via selective suppression of cyclooxygenase-2 in IFN-γ/LPS-stimulated macrophages

Our preliminary screening had shown that the curcumin derivative [2,6-bis(2,5-dimethoxybenzylidene)cyclohexanone] or BDMC33 exhibited improved anti-inflammatory activity by inhibiting nitric oxide synthesis in activated macrophage cells. In this study, we further investigated the anti-inflammatory properties of BDMC33 on PGE(2 )synthesis and cyclooxygenase (COX) expression in IFN-γ/LPS-stimulated macrophages. We found that BDMC33 significantly inhibited PGE(2) synthesis in a concentration-dependent manner albeit at a low inhibition level with an IC(50) value of 47.33 ± 1.00 μM. Interestingly, the PGE(2) inhibitory activity of BDMC33 is not attributed to inhibition of the COX enzyme activities, but rather BDMC33 selectively down-regulated the expression of COX-2. In addition, BDMC33 modulates the COX expression by sustaining the constitutively COX-1 expression in IFN-γ/LPS-treated macrophage cells. Collectively, the experimental data suggest an immunodulatory action of BDMC33 on PGE(2) synthesis and COX expression, making it a possible treatment for inflammatory disorders with minimal gastrointestinal-related side effects.     

Two new xanthones from Calophyllum nodusum (Guttiferae)

The air-dried powdered stem bark of Calophyllum nodusum (Guttiferea) collected from Sandakan (Sabah, Malaysia), was extracted sequentially with hexane, chloroform and methanol. The solvents were removed by rotary evaporator to give dark viscous extracts. Detailed and repeated chromatographic separation of the extracts lead to isolation of two new xanthones, identified as nodusuxanthone and trapezifolixanthone A. Other common terpenoids such as betulinic acid, lupeol, stigmasterol and friedelin were also isolated from the extracts and identified. The structures of the compounds were established by detailed spectral analysis and comparison with previously reported data.     

Analysis of single-mode condition and high-order modes discrimination in photonic crystal VCSEL

A new technique for analyzing the single-mode condition and mode discrimination of high-order modes in photonic crystal VCSEL is proposed and reported in this paper. The technique proposed is a semi-empirical approach that uses analytical analysis based on experimental data. For that purpose, single- and multimode photonic crystal VCSEL devices are fabricated and characterized for comparison of device performance. The mode width for first- and second-order mode of PhC VCSEL is computed for analyzing the mode behavior. In order to verify the findings, the fabricated single- and multimode devices are analyzed using finite difference frequency domain technique for the purpose of showing the loss as a function of mode order for the PhC VCSEL. The results show close agreement between the computed and experiment findings, justifying the use of the proposed semi-empirical technique for analyzing single-mode condition and of high-order modes discrimination in photonic crystal VCSEL.     

GPS patch antenna performance by modification of Zn(1−x)CaxAl2O4-based microwave dielectric ceramics

This study reports the characterization, fabrication, and performance of global positioning systems (GPS) patch antennas as a function of calcium (Ca) concentration and dielectric constant (? _r ). Zn_(1?x)Ca_xAl₂O₄ (x = 0.00, 0.05, 0.10, 0.20, 0.25, and 0.30) thin films were prepared through a sol–gel method. The effects of added Ca on the nanostructures and dielectric properties of ZnAl₂O₄ ceramics were investigated. The addition of Ca increased the crystallite size, grain size, and surface morphology, thereby increasing the density and dielectric constant. As the Ca content increased, the ? _r values linearly increased. However, the Q _u values decreased (at x = 0.25 to x = 0.25) after achieving the optimum values at x = 0.20. Finally, GPS patch antennas were successfully fabricated using the Zn_(1?x)Ca_xAl₂O₄ material. The patch antenna sizes decreased as ? _r increased from 2.88  × 4.37 cm (? _r  ≈ 8.52) to 2.88  × 4.37 cm (? _r  ≈ 10.16). The performance (return loss analysis) and operating frequencies of the GPS patch antennas were measured using the PNA series network analyzer. Results show that the patch antenna resonates at frequency of 1.570 GHz and produces a return loss bandwidth between ?16.6 and ?27.5 dB. The optimal performance of GPS patch antenna with ? _r  ≈ 9.95, Q _u  ≈ 6,186, and return loss = ?27.5 dB was obtained from specimen using Zn_0.80Ca_0.20Al₂O₄ (x = 0.20) ceramics.     

An Improved Study of Electronic Band Structure and Optical Parameters of X-Phosphides (X=B,Al, Ga,In) by Modified Becke-Johnson Potential

We report the electronic band structure and optical parameters of X-Phosphides (X=B, Al,Ga,In) by first-principles technique based on a new approximation known as modified Becke-Johnson (mBJ). This potential is considered more accurate in elaborating excited states properties of insulators and semiconductors as compared to LDA and GGA. The present calculated band gaps values of BP, AlP, GaP, and InP are 1.867 eV, 2.268 eV, 2.090 eV, and 1.377 eV respectively, which are in close agreement to the experimental results. The band gap values trend in this study is as: Eg (mBJ-GGA/LDA)Eg (GGA) Eg (LDA). Optical parametric quantities (dielectric constant, refractive index, reflectivity and optical conductivity) which based on the band structure are also presented and discussed. BP, AlP, GaP, and InP have strong absorption in between the energy range 4-9eV, 4-7eV, 3-7eV, and 2-7eV respectively. Static dielectric constant, static refractive index and coefficient of reflectivity at zero frequency, within mBJ-GGA, are also calculated. BP, AlP, GaP, and InP show significant optical conductivity in the range 5.2-10eV, 4.3-8eV, 3.5-7.2eV, and 3.2-8eV respectively. The present study endorses that the said compounds can be used in opto-electronic applications, for different energy ranges.