Montmorillonite K10 and KSF clays as acidic and green catalysts for effective esterification of phenols and alcohols under MWI

Montmorillonite K-10 and KSF clays catalyze esterification of phenols and alcohols under microwave irradiation and solvent-free conditions in high yields within seconds.     

Selection of aptamers for a non-DNA binding protein in the context of cell lysate

Aptamer-facilitated Protein Isolation from Cells (AptaPIC) is a recently introduced method that allows, in particular, generation of aptamers for a protein target in a context of a crude cell lysate. The approach enables efficient, tag-free, affinity purification of target proteins which are not available in a pure form a priori, and for which no affinity ligands are available. In the proof-of-principle work, AptaPIC was used to develop aptamers for and purify MutS, a DNA mismatch repair protein. The DNA-binding nature of MutS raised concerns that AptaPIC was not a generic technique and could be inapplicable to protein targets that do not possess native nucleic acid-binding properties. Here we prove that these concerns are invalid. We used AptaPIC to generate pools of aptamers for human Platelet-Derived Growth Factor chain B (PDGF-B) protein, a non-DNA binding protein, in the context of a bacterial cell lysate, and subsequently purify it from the same lysate. Within a small number of rounds, the efficiencies of aptamer selection were similar in conventional Systematic Evolution of Ligands by Exponential Enrichment (SELEX) for pure protein and in AptaPIC for protein in the cell lysate. The conventional selection approach resulted in an aptamer pool with an EC(50) value of 2.0±0.1 μM, while the AptaPIC selection approach resulted in a pool with an EC(50) value of 3.9±0.4 μM. Our results clearly demonstrate that selection of aptamers for proteins in the cell lysate is not only realistic but also efficient.     

Characterization of native and anodic oxide films formed on commercial pure titanium using electrochemical properties and morphology techniques

Potentiostatically anodized oxide films on the surface of commercial pure titanium (cp-Ti) formed in sulfuric (0.5 M H₂SO₄) and in phosphoric (1.4 M H₃PO₄) acid solutions under variables anodizing voltages were investigated and compared with the native oxide film. Potentiodynamic polarization and electrochemical impedance spectroscopy, EIS, were used to predicate the different in corrosion behavior of the oxide film samples. Scanning electron microscope, SEM, and electron diffraction X-ray analysis, EDX, were used to investigate the difference in the morphology between different types of oxide films. The electrochemical characteristics were examined in phosphate saline buffer solution, PSB (pH 7.4) at 25 °C. Results have been shown that the nature of the native oxide film is thin and amorphous, while the process of anodization of Ti in both acid solutions plays an important role in changing the properties of passive oxide films. Significant increase in the corrosion resistance of the anodized surface film was recorded after 3 h of electrode immersion in PSB. On the other side, the coverage (θ) of film formed on cp-Ti was differed by changing the anodized acid solution. Impedance results showed that both the native film and anodized film formed on cp-Ti consist of two layers. The resistance of the anodized film has reached to the highest value by anodization of cp-Ti in H₃PO₄ and the inner layer in the anodized film formed in both acid solutions is also porous.     

An efficient cubic B-spline and bicubic B-spline collocation method for numerical solutions of multidimensional nonlinear stochastic quadratic integral equations

This paper aims to develop a novel numerical approach on the basis of B-spline collocation method to approximate the solution of one-dimensional and two-dimensional nonlinear stochastic quadratic integral equations. The proposed approach is based on the hybrid of collocation method, cubic B-spline, and bi-cubic B-spline interpolation and Itô approximation. Using this method, the problem solving turns into a nonlinear system solution of equations that is solved by a suitable numerical method. Also, the convergence analysis of this numerical approach has been discussed. In the end, examples are given to test the accuracy and the implementation of the method. The results are compared with the results obtained by other methods to verify that this method is accurate and efficient.     

Natural Convection from a Vertical Plate in a Porous Medium Using Brinkman's Model

A regular perturbation analysis is presented for the following laminar natural convection flows of Newtonian fluids with temperature-dependent effective viscosity: a freely-rising plane plume, the flow above a horizontal line source on an adiabatic surface (a plane wall plume) and the flow adjacent to a vertical uniform flux surface for porous medium. The temperature-dependent effective viscosity introduces nonsimilarity into the governing equations. Numerical results are presented for the flow and heat transfer characteristics.     

Numerical solution of nonlinear partial quadratic integro‐differential equations of fractional order via hybrid of block‐pulse and parabolic functions

In this paper, an effective numerical approach based on a new two‐dimensional hybrid of parabolic and block‐pulse functions (2D‐PBPFs) is presented for solving nonlinear partial quadratic integro‐differential equations of fractional order. Our approach is based on 2D‐PBPFs operational matrix method together with the fractional integral operator, described in the Riemann–Liouville sense. The main characteristic behind this approach is to reduce such problems to those of solving systems of algebraic equations, which greatly simplifies the problem. By using Newton's iterative method, this system is solved, and the solution of fractional nonlinear partial quadratic integro‐differential equations is achieved. Convergence analysis and an error estimate associated with the proposed method is obtained, and it is proved that the numerical convergence order of the suggested numerical method is O(h³) . The validity and applicability of the method are demonstrated by solving three numerical examples. Numerical examples are presented in the form of tables and graphs to make comparisons with the exact solutions much easier.     

Design and synthesis of new 2-substituted-5-[2-(2-halobenzyloxy)phenyl]-1,3,4-oxadiazoles as anticonvulsant agents

A new series of 2-substituted-5-[2-(2-halobenzyloxy)phenyl]-1,3,4-oxadiazoles was designed and synthesized as anticonvulsant agents. Electroshock and pentylenetetrazole-induced lethal convulsion tests showed that the introduction of an amino group at position 2 of 1,3,4-oxadiazole ring and a fluoro substituent at ortho position of benzyloxy moiety had the best anticonvulsant activity. Our results showed that this effect is mediated through benzodiazepine receptors mechanism.     

Biological Potentials and Phytochemical Constituents of Raw and Roasted Nigella arvensis and Nigella sativa

Nigella species are widely used to cure various ailments. Their health benefits, particularly from the seed oils, could be attributed to the presence of a variety of bioactive components. Roasting is a critical process that has historically been used to facilitate oil extraction and enhance flavor; it may also alter the chemical composition and biological properties of the Nigella seed. The aim of this study was to investigate the effect of the roasting process on the composition of the bioactive components and the biological activities of Nigella arvensis and Nigella sativa seed extracts. Our preliminary study showed that seeds roasted at 50 °C exhibited potent antimicrobial activities; therefore, this temperature was selected for roasting Nigella seeds. For extraction, raw and roasted seed samples were macerated in methanol. The antimicrobial activities against Streptococcus agalactiae, Streptococcus epidermidis, Streptococcus pyogenes, Candida albicans, Escherichia coli, Enterobacter aerogenes, Klebsiella pneumoniae, and Klebsiella oxytoca were determined by measuring the diameter of the zone of inhibition. The cell viability of extracts was tested in a colon carcinoma cell line, HCT-116, by using a microculture tetrazolium technique (MTT) assay. Amino acids were extracted and quantified using an automatic amino acid analyzer. Then, gas chromatography–mass spectrometry (GC–MS) analysis was performed to identify the chemical constituents and fatty acids. As a result, the extracts of raw and roasted seeds in both Nigella species showed strong inhibition against Klebsiella oxytoca, and the raw seed extract of N. arvensis demonstrated moderate inhibition against S. pyogenes. The findings of the MTT assay indicated that all the extracts significantly decreased cancer cell viability. Moreover, N. sativa species possessed higher contents of the measured amino acids, except tyrosine, cystine, and methionine. The GC–MS analysis of extracts showed the presence of 22 and 13 compounds in raw and roasted N. arvensis, respectively, and 9 and 11 compounds in raw and roasted N. sativa, respectively. However, heat treatment decreased the detectable components to 13 compounds in roasted N. arvensis and increased them in roasted N. sativa. These findings indicate that N. arvensis and N. sativa could be potential sources of anticancer and antimicrobials, where the bioactive compounds play a pivotal role as functional components.     

Discrete Transforms and Matrix Rotation Based Cancelable Face and Fingerprint Recognition for Biometric Security Applications

The security of information is necessary for the success of any system. So, there is a need to have a robust mechanism to ensure the verification of any person before allowing him to access the stored data. So, for purposes of increasing the security level and privacy of users against attacks, cancelable biometrics can be utilized. The principal objective of cancelable biometrics is to generate new distorted biometric templates to be stored in biometric databases instead of the original ones. This paper presents effective methods based on different discrete transforms, such as Discrete Fourier Transform (DFT), Fractional Fourier Transform (FrFT), Discrete Cosine Transform (DCT), and Discrete Wavelet Transform (DWT), in addition to matrix rotation to generate cancelable biometric templates, in order to meet revocability and prevent the restoration of the original templates from the generated cancelable ones. Rotated versions of the images are generated in either spatial or transform domains and added together to eliminate the ability to recover the original biometric templates. The cancelability performance is evaluated and tested through extensive simulation results for all proposed methods on a different face and fingerprint datasets. Low Equal Error Rate (EER) values with high AROC values reflect the efficiency of the proposed methods, especially those dependent on DCT and DFrFT. Moreover, a comparative study is performed to evaluate the proposed method with all transformations to select the best one from the security perspective. Furthermore, a comparative analysis is carried out to test the performance of the proposed schemes with the existing schemes. The obtained outcomes reveal the efficiency of the proposed cancelable biometric schemes by introducing an average AROC of 0.998, EER of 0.0023, FAR of 0.008, and FRR of 0.003.